santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
  
|
I have a problem with the brightness, Is there someone that has been able to solve this problem?
(the issue of the brightness)
For me is too dark during day.
Some of the menus doesn´t work like trip info, ...
|
 19th Mar 2012 12:29 pm |
|
|
Morgis
Member Since: 18 Feb 2012
Location: Kristiansand
Posts: 274
 
|
the RR uses different lightsensor or rheostat than discovery?
|
| 21st Mar 2012 4:24 pm |
|
|
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
|
that seems....
|
| 21st Mar 2012 4:49 pm |
|
|
Black_64
Member Since: 21 Feb 2012
Location: Limburg
Posts: 47
 
|
Stuarts the man wrote:And you dont even need to pay to get 4x4 enabled it works right away 
After cutting this wire, i have the 4x4 screen. (great mod)
But it's not fully working.
When switching between the modes, the 4x4 screen doesn't change.
Only the gear selector (manual), downhill symbol and wheel direction works.
But no heights and the big round mode selector.
Or i don't know how this works. 
|
| 21st Mar 2012 8:07 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6313
|
I don't think it will work fully unless the CCF file has been edited to enable the 4x4 info screen.
I put mine back to D3 mode today because as soon as I use my phone it locks the phone screen up and you can't scroll through the phone book.
Wiggs did say this would happen because it get confused on what to show the phone book on...
Not sure its worth the hassle...
Flack 
|
| 21st Mar 2012 8:32 pm |
|
|
Black_64
Member Since: 21 Feb 2012
Location: Limburg
Posts: 47
|
Flack wrote:I don't think it will work fully unless the CCF file has been edited to enable the 4x4 info screen.
Then i need to wait for an update of the IID Tool. 
|
| 21st Mar 2012 8:51 pm |
|
|
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
|
Flack
And you have solved the brightness problem???
|
| 21st Mar 2012 9:38 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6313
|
santiD3
No bud not had time to look in to it, its on my list but at the back...
Flack
|
| 21st Mar 2012 9:39 pm |
|
|
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
|
Me also,....do you have the solution???
|
| 21st Mar 2012 9:43 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6313
|
The solution is here in this post wiggs has already told us what we need to look for on the board inside the screen, its just a case of finding the correct type of switch/resistor to wire in to the board so we can adjust the level.
If anybody has a way or is up on electronics then feel free to put ideas forward and chip in
Flack
|
| 21st Mar 2012 9:55 pm |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8244
 
|
[quote=]
But it's not fully working.
When switching between the modes, the 4x4 screen doesn't change.
Only the gear selector (manual), downhill symbol and wheel direction works.
But no heights and the big round mode selector.
Or i don't know how this works. [/quote]
Another quotes states the engine must be restarted after the change over switch has been operated to change the mode. It can when others can't,
It will when others won't,
It goes where others don't.
|
| 22nd Mar 2012 7:56 am |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6313
|
M3DPO
To change modes you make a selection with your switch then let the car go to sleep and when it wakes and reboots it should reboot to D3 or RR software depending on your switch position.
Flack
|
| 22nd Mar 2012 12:53 pm |
|
|
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
|
Flack wrote:The solution is here in this post wiggs has already told us what we need to look for on the board inside the screen, its just a case of finding the correct type of switch/resistor to wire in to the board so we can adjust the level.
If anybody has a way or is up on electronics then feel free to put ideas forward and chip in
Flack
Hi Flack
Yes I see post wiggs, but I don´t have clear something, when you say correct type of switch/resistor you mean the swithc to change the modes btween RR and D3 or I need to found out the brightness sensor...???
|
| 22nd Mar 2012 1:07 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6313
|
santiD3
No I mean something that can be put in the screen that can control the brightness like a potentiometer I am not that good on electronics being a mechanical guy but I am sure there is somebody on here who can sort this out.
I am going to ask at work as well...
Flack
|
| 22nd Mar 2012 1:33 pm |
|
|
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
|
Thanks Flack, now I understand, I have a friend who can help me on eletronics.
Then the idea is to find the brightness sensor and then place the potenciometer betwwen two of the wires?
|
| 22nd Mar 2012 2:52 pm |
|
|
