santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
  
|
Hi Wiggs
some time ago I changed (sent yo you my old D3 module)the D3 module by a D4 module, do you new if there is any update??'
|
 25th Sep 2014 2:56 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
  
|
No updated for the D4 module I'm afraid G4 Gone ...but not forgotten
|
| 25th Sep 2014 3:07 pm |
|
|
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
|
ohhh thanks for the info, D4 module works ok but sometimes I dont see any of my contact, and sometimes yes,...
|
| 25th Sep 2014 3:25 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
Have you done the range rover screen mod ? G4 Gone ...but not forgotten
|
| 29th Sep 2014 8:10 am |
|
|
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
|
Yes I have, is there any problem with that mod??
Last edited by santiD3 on 29th Sep 2014 9:01 am. Edited 1 time in total
|
| 29th Sep 2014 8:50 am |
|
|
vnitos
Member Since: 17 Oct 2010
Location: ZA
Posts: 61
|
does this modification also take care of the fact that the pre-2010 models could not stream music via bluetooth?
|
| 29th Sep 2014 8:56 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
No ... You still don't have any software in the car to make that happen
SantiD3
Look here http://www.disco3.co.uk/forum/topic118089.html G4 Gone ...but not forgotten
|
| 29th Sep 2014 1:34 pm |
|
|
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
|
thanks Wiggs..
|
| 29th Sep 2014 1:48 pm |
|
|
ThinkDima
Member Since: 01 Oct 2014
Location: New York
Posts: 20
 
|
hi, i'm interested in getting the bluetooth fitted to my '06 SE.
i don't have the buttons on the steering wheel or nav screen, but i do have phone button on the radio.
what would i need for a complete/functional setup to use bluetooth with factory stereo? Is there a place i can find the installation instruction as well?
can i get this in US?
Thank you for the info!
|
| 14th Oct 2014 2:47 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
To retro fit the factory kit you need
Bluetooth module
Most cable
Steering wheel phone buttons
Mic
It would need enabling once fitted
I wouldn't bother with the LR aftermarket kit .. Complete waste of time ( as in your other post ) G4 Gone ...but not forgotten
|
| 14th Oct 2014 6:44 am |
|
|
ThinkDima
Member Since: 01 Oct 2014
Location: New York
Posts: 20
|
Really?
For some reason i thought that bluetooth by itself would make more sense and less hassle? is it really that bad?
Thanks
|
| 14th Oct 2014 2:55 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
Its a lot harder to fit .. Can't be updated .
Won't show any contacts or any thing else on radio
Is very very basic G4 Gone ...but not forgotten
|
| 14th Oct 2014 4:40 pm |
|
|
ThinkDima
Member Since: 01 Oct 2014
Location: New York
Posts: 20
|
Thanks, wiggs.
i'll send you a PM with a couple of questions if you don't mind.
|
| 14th Oct 2014 5:05 pm |
|
|
mwoodpower
Member Since: 30 Dec 2008
Location: Ramsgate
Posts: 25
|
back to the d3 to d4 swap, maplin sell single pin mother board extensions, which are a short length of wire with a male plug on one end and a female socket on the other. these can be used between the new module and the existing plug. codes are g075 or 146-69470
put a photo in my gallery of them, hope its useful!
|
| 27th Oct 2014 9:14 am |
|
|
jammer0070
Member Since: 21 Mar 2010
Location: bristol
Posts: 33
|
hi I have a 07 plate disco hse with the Bluetooth installed but whoever I'm talking to can't hear me properly as it echoes I have the buttons on the right side of the steering wheel I'm after the d4 upgrade I think.will it need to be enabled also will it do the touch screen control like the Range Rover regards Jaymie
|
| 16th Nov 2014 5:46 pm |
|
|
