Somerset Jem
Member Since: 07 Jul 2011
Location: Somerset
Posts: 435
  
|
thanks Wiggs, is that a main dealer job? Any idea of cost?
|
 16th Aug 2011 12:44 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
  
|
Some dealers will do it ( others don't seem to know what there doing )
Takes 45 mins to program .. So should be about an hours labour at your dealer.
Someone with a faultmate can do it also G4 Gone ...but not forgotten
|
| 16th Aug 2011 12:49 pm |
|
|
Somerset Jem
Member Since: 07 Jul 2011
Location: Somerset
Posts: 435
|
thanks for the info Wiggs, I'll have a look round on the site for someone with a faultmate near Taunton who might be willing to do it for me. 
|
| 16th Aug 2011 12:53 pm |
|
|
joe-2020
Member Since: 15 Aug 2011
Location: California
Posts: 7
|
Thanks for the info wiggs. Also is there anyway to modify the D4 unit to stream A2DP audio from an iphone? Currently i just use belkin bluetooth receiver but it would be great if it was built in. Also does the kit you sell also include the wring to change from a 3 row adapter to a 2 row adapter or do I have to go to radio Shack and splice wires? Thanks.
|
| 17th Aug 2011 9:18 am |
|
|
joe-2020
Member Since: 15 Aug 2011
Location: California
Posts: 7
|
Wiggs, I'm interested in buying a D4 Unit Kit can you message me with pricing and payment method info thanks.
|
| 17th Aug 2011 9:37 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
Sorry ... Don't have any d4 modules left G4 Gone ...but not forgotten
|
| 17th Aug 2011 9:39 am |
|
|
joe-2020
Member Since: 15 Aug 2011
Location: California
Posts: 7
|
Where can I buy one and where can i get the wiring adapter for a 2 row to a 3 row? Or is everyone just doing the Hard drive cable modification?
|
| 17th Aug 2011 9:40 am |
|
|
albal
Member Since: 31 Jul 2011
Location: Southampton
Posts: 592
|
The only pins used on the connector are the power and ground. I can send you out a 2 pin connector if you want, I've a few of them kicking about. They are not very long so you'll have to extend them to your 12v and GND points.
edit: Seen you are State-side so maybe not such a good idea - Radioshack should have what you need.
|
| 17th Aug 2011 11:56 pm |
|
|
joe-2020
Member Since: 15 Aug 2011
Location: California
Posts: 7
|
albal, I appreciate your generosity but i'll probably just go to Radio Shack. Do you have a picture of your connection to the power points on the old 3 row adapter and/Or a diagram? I have seen the diagram of which pins to connect to the NEW D4 Module in the forum. But i don't know which corresponding holes in the 3 row plastic adapter are the 12v and the ground. Thanks in Advance.
|
| 18th Aug 2011 5:17 am |
|
|
albal
Member Since: 31 Jul 2011
Location: Southampton
Posts: 592
|
I'm fitting a D4 module into a D3 which never had Bluetooth so I don't have the plug. As said before the only pin connections are for the power and ground. Trying to make the connector fit or re-uses other connections may cause other problems.
Cheers.
Al
|
| 19th Aug 2011 2:05 pm |
|
|
joe-2020
Member Since: 15 Aug 2011
Location: California
Posts: 7
|
I'm not sure which wires are ground and 12v on the connector tho for the bluetooth does anyone have a picture or a diagram? which 2 wires on the adapter i should spice or stick into the hole?
|
| 19th Aug 2011 8:45 pm |
|
|
|
|
joe-2020
Member Since: 15 Aug 2011
Location: California
Posts: 7
|
I appreciate the power info wiggs. Your awesome. Would connecting any other pins add functionality to steeringwheel? such as the voice command button on the steering wheel? (i don't have and don't want the cell phone center console craddle tho)
|
| 20th Aug 2011 3:37 am |
|
|
reitsma
Member Since: 03 Feb 2011
Location: skien
Posts: 138
|
Hi
Bought the D4 module, some questions remains:
*what is the part number for the green/red phone button steering wheel switch?
*is it possible to activate the BT module with an Autologic interface, if so, what file must be used?
Thanks for the info. www.skienklinikk.no
|
| 20th Aug 2011 9:50 am |
|
|
albal
Member Since: 31 Jul 2011
Location: Southampton
Posts: 592
|
The part number of the telephone buttons depends on the colour of your interior and it's linked to the VIN number. If you give 'The Large One' a call at Yeovil Landrover he will be able to order up the right one for you with a good forum discount too.
edit: Sorry keep on missing that not all people are from the same parts...
Apparently you can activate the BT module with Autologic but they'll have to know how to do it. I know of a forum member who has been in and out of a local specialist, to be fair they usually do Defenders and D1/2's, and they've not got the config quite right yet. Searching for +autologic +bluetooth didn't come up so maybe someone who has done it could post a guide.
|
| 20th Aug 2011 12:10 pm |
|
|
