Member Since: 10 May 2020
Location: Bristol
Posts: 70
Dont worry we all go through the pain of reading this thread and trying to work out what bits we need and how to install them.
I ended up buying (at first) the wrong bluetooth module as I just searched for a d4 one. However, as Wiggs has pointed out, you need the 'square' type with the MOST connection.
Ive just created some power wiring from old computer cable and tweaked with a MOST cable to create the link for the new module (as my d3 didint have one originally)
Hopefully try it this weekend to ensure its getting power and signal.
Then its just sorting the ccf update.
5th Jun 2020 8:10 am
Lukie
Member Since: 06 Jun 2020
Location: Liverpool
Posts: 23
Been attempting this myself today, so I have a d4 unit, a most cable adaptor and the power cable needed for information JST 2P is the cable i used fits well
When i hooked it up to power it stated the phone was disconnected, did a BT search and didn't find anything, IID did see the bluetooth unit was there showed no faults, I put the D4 unit into my fatty and everything worked fine, paired my phone to it then transferred it back to D3 but nothing any pointers please?
6th Jun 2020 3:50 pm
Lukie
Member Since: 06 Jun 2020
Location: Liverpool
Posts: 23
Oh and i did edit the CCF with IID to say bluetooth unit was present but didnt do anything
I am based in liverpool with IID PRO
6th Jun 2020 3:52 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
If you haven’t had Bluetooth in the discovery before , you’ll need to enable it in the CCFG4 Gone ...but not forgotten
6th Jun 2020 3:53 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
What settings did you change ?G4 Gone ...but not forgotten
6th Jun 2020 3:54 pm
Lukie
Member Since: 06 Jun 2020
Location: Liverpool
Posts: 23
Anything that referred to bluetooth i switched on, didnt screen shot the settings sorry (i should of)
Just to confirm the D4 BT unit has been tested and works fine, when in D3 radio works fine (showing wired right for power and most) but unit no discoverable by phone
I did take this screen shot from IID with all firmware details
6th Jun 2020 3:59 pm
Lukie
Member Since: 06 Jun 2020
Location: Liverpool
Posts: 23
Forgot image
6th Jun 2020 3:59 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
It will probably be cellular phone with docking station .. most people select no docking stationG4 Gone ...but not forgotten
6th Jun 2020 4:00 pm
Lukie
Member Since: 06 Jun 2020
Location: Liverpool
Posts: 23
Yes i do recall the cradle option and i did select no cradle as there is nothing fitted, will try this again and select all the different options, got distracted this afternoon so gave up alot sooner than i normally would
6th Jun 2020 4:12 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Cradle needs to be selected .. wether it’s there or notG4 Gone ...but not forgotten
6th Jun 2020 4:14 pm
Lukie
Member Since: 06 Jun 2020
Location: Liverpool
Posts: 23
Thank you wiggs for your quick responce's very much appreciated, i will report back once i get chance to play again
6th Jun 2020 5:01 pm
Lukie
Member Since: 06 Jun 2020
Location: Liverpool
Posts: 23
Still sat in car but making progress but need to locate power source, any suggestions? Had no bluetooth unit installed to begin with so all round the dashboard with fitting
8th Jun 2020 4:20 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10742
the radio has power.
I think the thick blue/purple is +
black is ground, either on radio or cigar lighter
green/purple on pin 1 of the climate pack is also +12v
8th Jun 2020 4:25 pm
Lukie
Member Since: 06 Jun 2020
Location: Liverpool
Posts: 23
Pete thanks for the reply, i need a power supply that stays active untill the car is locked, using the ignition live dosnt allow the radio to shut down when i take the key out
8th Jun 2020 5:08 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10742
I thought a battery supply was required
I must re read this thread
What does it recommend ?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
any pointers please?
