Member Since: 18 Feb 2012
Location: Kristiansand
Posts: 274
i already find it too bright at night, but too dim at daylight..
that stupid white intense background color never work fine at night time. - My 2006 D3 HSE PP
17th Oct 2012 3:03 pm
pepekleinhans
Member Since: 12 Oct 2012
Location: Cape Town
Posts: 42
PhyrraM
I have the same problem as you, if I select terrian respons, then I get the same no difflock and also not showing in what mode I am in, it will show my gear sellection. I have also noticed my trip indicators is not recording anything, is that normal or not. I have done the brightness upgrade with the diode and it works perfect, I have no issues. I will get my bluetooth module tomorrow from Wiggs and will do that installation tomorrrow, will let you guys know how it works.
Cheers
Pepe
23rd Oct 2012 9:13 pm
PhyrraM
Member Since: 03 Oct 2012
Location: California
Posts: 13
I'm guessing that my missing icons are just a different (earlier?) firmware than most.
I've just recieved my FaultMate, but haven't really played with it yet. Flashing the screen firmware seems a bit steep on the learning curve for a first project.
I wonder if it's possible to aquire the software tools (LR or Denso?) to recompile the firmware. Then it would be theoretically possible to use the D3/LR3 screen brightness "software module" with the RR mode firmware. I suppose if it was as easy as that, somebody would have already done it (or the tools are just on lockdown from LR/Denso)2006 LR3 V8 HSE
24th Oct 2012 2:35 am
RJKii
Member Since: 18 Sep 2012
Location: Michigan, USA
Posts: 2
PhyrraM wrote:
I just pulled the pin to enable RRS mode on my USA spec 2006 HSE V8.
Works good. The screen brightness seems OK for now, not too sunny today. For me having access to the radio screens is nice. However, I seem to have lost the Terrain Responce and diff lock icons on the 4x4 info screen. Anybody else noticed this? I have the 2011/2012 NAV disc installed - if you think that matters.
PhyrraM, I noticed the same thing as you mentioned, my 4x4 info no longer displays correctly.
Did you ever find a solution? I'll live with it as is, but curious on what you may have found out.
FYI, I also have an 06 HSE LR3, USA spec of course.
25th Nov 2012 4:08 am
PhyrraM
Member Since: 03 Oct 2012
Location: California
Posts: 13
I have not experimented with it further.
I was going to use my new Faultmate to do the nav-on-the-move updates on the next free weekend. I wonder if the final software version I choose for the touchscreen will enable the missing icons?2006 LR3 V8 HSE
29th Nov 2012 4:07 am
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
Hi v8Louis
Nice job, also I have solved brightness with other solution, using pin located on the left.
Make some test, and runs ok. Only there is to much brightness during night and then you have to set it.
29th Nov 2012 12:14 pm
PhyrraM
Member Since: 03 Oct 2012
Location: California
Posts: 13
SantiD3,
If you have a Faultmate, would you mind posting what software version you have installed on the screen to be able to see the Terrain Response and diff-lock icons in RR mode?2006 LR3 V8 HSE
Is anyone willing to do the brightness conversion on mine for me please ?
30th Nov 2012 8:45 am
pepekleinhans
Member Since: 12 Oct 2012
Location: Cape Town
Posts: 42
santiD3 wrote:
Hi v8Louis
Nice job, also I have solved brightness with other solution, using pin located on the left.
Make some test, and runs ok. Only there is to much brightness during night and then you have to set it.
SantiD3, 1 question that some of have, when you done your upgrade did you loose any information on your 4x4info screen, in your picture everything seems normal, in the above treadfs you will see some of us have some problems, did you had to do anything or not. My car will go in on the 17th Desember, but this guys does not have a faultmate but the logitech system, do you know if this will work?
Cheers
Pepe
3rd Dec 2012 12:21 am
Morgis
Member Since: 18 Feb 2012
Location: Kristiansand
Posts: 274
What software is recommended for the satnav screen ?
I also missed some 4x4 infos, difflock and switch position. - My 2006 D3 HSE PP
4th Dec 2012 8:46 am
Landie71
Member Since: 23 Oct 2012
Location: Worksop, Nottinghamshire
Posts: 1019
Just done the RR mod with the brightness fix using a the diode & overall it works as expected. I know there's been a few reports of it locking up following the mod, but it's locked up each time I've used my phone (connected by a D4 Bluetooth module) in RR mode - its when I hang up the call either from the phone, the steering wheel switches or the display. I also seem to have the 'bits missing' on the 4x4 info screen (not desperately worried about this bit, but it'd be nice to have it back).
I did put a switch so I've switched it back to D3 mode for now as I need it working for the morning, but if anyone's got any ideas why it locks up after using the phone I'd appreciate any clue's?
5th Dec 2012 9:48 pm
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
PhyrraM wrote:
SantiD3,
If you have a Faultmate, would you mind posting what software version you have installed on the screen to be able to see the Terrain Response and diff-lock icons in RR mode?
PhyrraM
Yes I have faultmate, I´ll do it and let You know...
pepekleinhans
No, I haven´t loosen any info, every runs like D3 mode and I haven´t done everything else...
Do you have 4x4info before you change to FFRR mode??
?
6th Dec 2012 8:33 pm
pepekleinhans
Member Since: 12 Oct 2012
Location: Cape Town
Posts: 42
Hi there SantiD3
Yes before i done the upgrade the 4x4 info worked fine, so I suspected that it have to do with the software version, me and the other guys have in the cars, So if you don't mind finding out what version you have then we can try and download it.
Your help will be much appreciated
Regards
Pepe
7th Dec 2012 12:27 am
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
pepekleinhans
Which map version do you have? I mean, did you update until 2009-2010? Same time sat nav update it was a software update.....
7th Dec 2012 7:58 pm
Landie71
Member Since: 23 Oct 2012
Location: Worksop, Nottinghamshire
Posts: 1019
Just noticed something - on my 05MY the 4x4 Info display has three blocks in the middle, the Home softkey, a long Terain Response indicator and a square HDC indicator as in the picture below:
Click image to enlarge
However in the other posts (like pepekleinhans post shows), there are four blocks in the middle - the Terain Response is split into two - I'm guessing this might be a quick & easy way to tell which software version is running? When I switch to RR mode, the long Terain Response indicator block disapears, but from pepekleinhans post, his doens't.
As far as I'm aware, mine's not had a software update done (for example the 3-flash indicator doesn't work even so I've switched them on with the Faultmate). When I get five mins I'll plug my Faultmate in again & see what version of software I've got on mine & let you all know.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
- 
