androulakis
Member Since: 04 Jul 2012
Location: Princeton NJ
Posts: 2
|
wiggs wrote:Hi
Welcome to the site
while the d3 module will proberly cure your issues ..the D4 module has better features and a more up to date bluetooth protocol ( better for future phones )
will also give you 1000 contacts ( insted of 300 on old module )
show mutiple numbers per name
show signal strenght and service provider
disconnects once the car is switched off ( unless your on a call )
if you can afford the difference i would go D4 module
i will pm you the prices and you can weight it up
Thanks for the prompt reply.
I have emailed you since I am not able to PM as of yet.
Take care,
George
|
 4th Jul 2012 7:45 pm |
|
|
Dave P
Member Since: 15 Jun 2008
Location: Essex
Posts: 12
  
|
Hello, I've got problems with pairing my blackberry to the XVJ500122 nokia bluetooth module, can the firmware be upgraded on the module? Thank you Dave
|
| 4th Jul 2012 8:33 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
  
|
Yes it can ... Exchange post is here
http://www.disco3.co.uk/forum/topic53544.html
The blackberry is the only one I can't guarantee ... There is so many different softwares for them
The D4 one this thred is about works no problem with blackberrys G4 Gone ...but not forgotten
|
| 4th Jul 2012 8:43 pm |
|
|
Dave P
Member Since: 15 Jun 2008
Location: Essex
Posts: 12
|
Thanks for your help, my kit is an after market kit with the password 0000 will the upgrade be OK ?
|
| 4th Jul 2012 9:39 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
 Sorry I read that as a different part number
No the aftermarket kit dosent upgrade .
Youd be better off fitting the factory fit kit ... You would have to remove the old wiring loom from the aftermarket kit though G4 Gone ...but not forgotten
|
| 4th Jul 2012 9:48 pm |
|
|
Matte709
Member Since: 02 Jul 2012
Location: Bexely
Posts: 1
 
|
Hello there I was redirected to this forum after searching why my Bluetooth in my 2006 RRS doesn't work with my iPhone 4s. After reading this thread it appears I need the D4 module from wiggs. Only small problem is I can't pm him as I'm a newbie. So this is my first post, I have losts of other questions as well just got to find the right sections.
|
| 4th Jul 2012 10:02 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
Have pm'd you G4 Gone ...but not forgotten
|
| 4th Jul 2012 10:45 pm |
|
|
adrianstella
Member Since: 01 Dec 2010
Location: london
Posts: 2
|
Hi
I have same problem with range rover sport 2007 and iphone4. It pairs using 2121 but car dosn't remember phone and has to be manually paired each time I get into the car.
I hear you have replacement phone modules for sale that would solve the problem. Is this true please? If so please could you call me on 07971495051
Thanks
Adrian
|
| 5th Jul 2012 9:28 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
i have pmd you as there is some document attached to read
i would also remove your phone number from a public forum G4 Gone ...but not forgotten
|
| 5th Jul 2012 12:16 pm |
|
|
oh no
Member Since: 22 Apr 2007
Location: berkshire
Posts: 59
|
Hi wiggs.
Got d4 modul today and fit work a lot great service adrian.
Better than old d3 one but how do you get the voice control to work ?
Cheers
Stephen
|
| 5th Jul 2012 6:09 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
this was posted a few pages into this post
wiggs wrote:I have just found out that the voice controls that are normally stored in the bluetooth module are not stored in the D4 module any more 
If you have full voice control ( ie radio , nav etc ) then it makes no difference as it uses the voice control stored in the nav unit .
i presume you only have voice for the telephone (profile shows SE model )....in that case you need to get full voice enabled ...that will bring back the voice control .
if your not happy i will give you a refund on the module .
Geoff is down your way ...i can get him to switch it on for you G4 Gone ...but not forgotten
|
| 5th Jul 2012 7:26 pm |
|
|
Reeberman
Member Since: 23 Jul 2011
Location: UK
Posts: 2
|
You're the salt of the earth, Wiggs. 
Ordered a D4 module on Sunday, you posted on Monday, received on Tuesday and now I have a fully functioning iPhone 4S that works brilliantly in the Disco for the first time ever.
Incidentally, after testing it first, I cut the fixing lugs off the module and it fits nicely on the D3 module bracket with foam tape or a cable tie.
Star man. Indebted to you.
|
| 5th Jul 2012 8:11 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
Excellent news G4 Gone ...but not forgotten
|
| 5th Jul 2012 8:34 pm |
|
|
mpurchase
Member Since: 09 May 2012
Location: Auckland
Posts: 4
 
|
Huge thanks to Adrian for supplying the parts I needed halfway around the world and for his prompt responses and advice. My RRS now has full D4 bluetooth phone capability after having the D4 module, MOST cable, and phone switches installed as a home DIY project.
To try to 'give a little back' I noticed on page 28 of this thread there was unresolved debate as to whether autologic could successfully enable the cars CCF for the new module. I can confirm it does - had it done 30 minutes ago and it's 100% working. In Autologic you need to go into "infotainment", "Cellphone" and then enable "Dock station with bluetooth" (as per Adrian's advice on page 28/29 of this thread.
Hope this helps some others. I should add that my independant had updated the Autologic software only yesterday.
Cheers Wiggs!!!
Mike
|
| 6th Jul 2012 12:04 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
No probs Mike
Hope it was an easy install ... And happy to sort the bits out for you G4 Gone ...but not forgotten
|
| 6th Jul 2012 12:23 am |
|
|
