Member Since: 08 Jun 2010
Location: suffolk
Posts: 39
wiggs,
i've just located one of the LR4 bluetooth units, inspired by your modification I want to do the same.
Can I make up a 2 wire lead from the existing 3 row plug to go to the new 2 row socket and if so which pins do I need to connect to ? and if not where would I pick up the live and earth please.
Also, how do i remove the panel in the boot area please.
Lastly - is it possible to view the phone book on the main touchscreen ? or is there an 'upgrade' for that ?
thanks for your help.
are you ever in suffolk area ?
28th Jul 2010 3:11 pm
harrim51
Member Since: 29 Aug 2009
Location: Malvern
Posts: 275
Mr Wiggs is the man... Thanks
29th Jul 2010 7:47 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Slitter
There are 5 pins if you just have bluetooth ( a few more if you have the cradle aswell )
Pin 16 is the ignition / wake up wire and either pin 33 or 34 for ground .
Yes ..just make up a jump lead from there to the new d4 module ..or pull the plug apart ...there are 3 rows of connectors in side
Another advantage of the D4 module is that you can put an active call "on hold" with a pull of the green button, effectively muting the mic. I was always surprised this was missing on the D3 unit. Very handy if you take part in lots of conf calls Andy
Member Since: 01 Jun 2009
Location: oldham
Posts: 4
Hi, I have been told to contact you by my work colleque (tintenter) regarding signature lights on a discovery4 gs,is it possible to retro fit factory orderd xenons with signature lights to my discovery4,I also have the bright pack fitted. Many thanks Ken. ps any info would be welcome.
16th Aug 2010 11:37 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
I have a few more d4 bluetooth modules if any one is interested ..pm me G4 Gone ...but not forgotten
23rd Aug 2010 9:19 pm
slitter
Member Since: 08 Jun 2010
Location: suffolk
Posts: 39
Wiggs,
I have made up some cables to plug in to the new BT module. How did you connect in to the existing plug on the loom ?
Thanks,
24th Aug 2010 5:05 pm
slitter
Member Since: 08 Jun 2010
Location: suffolk
Posts: 39
I stripped the side panel off and found the BT unit, I unplugged it, then I came to unplug the MOST cable, and I was 'most' careful, is there a trick to unplugging the MOST cable, I was very wary about damaging the cable or connector. Thanks
24th Aug 2010 5:35 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Connected to old d3 connector with some small thin pin connectors .
You have to press the tab in on the most connector
tab is at the top right of the red line ... would need pushing over to the left ..looking at that pictureG4 Gone ...but not forgotten
25th Aug 2010 7:19 pm
slitter
Member Since: 08 Jun 2010
Location: suffolk
Posts: 39
Thanks very much, very concise as usual - I'll change it over at the weekend. thanks again.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
