Member Since: 01 Apr 2013
Location: Herefordshire
Posts: 39
dangerdave wrote:
Yes, it's dead easy, there's a guide on here. It won't be enabelled, you'll need someone with a Faultmate or a local independent LR garage with an Autologic machine to do that.
Thanks, I did try to find a guide but no joy, I'll try again. I'm pretty sure that Rob at Docklow Land Rover near me has an Autologic so ill try him once I get the buttons sorted.
Cheers
Guy
19th Jul 2013 8:07 pm
dangerdave
Member Since: 23 Nov 2010
Location: <>
Posts: 4495
Admin note: post content removed at user request
19th Jul 2013 8:38 pm
Gudge
Member Since: 01 Apr 2013
Location: Herefordshire
Posts: 39
dangerdave wrote:
Here's a post mentioning the part numbers you need. Alternatively, they come up here or on Fleabay.
Member Since: 23 Nov 2010
Location: <>
Posts: 4495
Admin note: post content removed at user request
19th Jul 2013 10:45 pm
jack2006
Member Since: 12 Feb 2009
Location: Matlock, Derbyshire
Posts: 106
Re: Retro fit Cruise control
gab-es wrote:
Hi i have had the cruise control buttons fitted to my car but they are unable to operate the cruise control, the garage states that they tried to change the software to make it work, but without sucess, does anybody know if it is possible to get the cruise control to function, does it require an extra ECU to be plugged in, or just a change in the software, i feel that i am nearly there but not quite! Does anybody know the solution?
Fitted Cruise control buttons to my 2012 D4 a few weeks ago. They will need enabling in the body control software though to work (CCF and EUCD File).
CCF
Cruise control config: - Speed control fitted
EUCD
Cruise control:- Cruise control
Also a setting in the Jaguar menu for D4 will need to be set for cruise.
In my case I used the Faultmate 2 to do these changes. Several of the members on this site have multi-licence Faultmates operating as a business and might be able to help.
27th Jul 2013 5:11 pm
Ollram
Member Since: 04 Dec 2006
Location: Gortynia
Posts: 608
hi
i've retrofited it but CC does not work.
Prior to use autologic (which will cost me ), ive been told (by DISCO MICKEY cheers ) that CC requires fuse no 5 to be in place (in the engine bay box) and as per the wiring diagram this is the correct fuse from the SCM...
Althought this fuse is described to function: petrol - petrol EMS (purge valve, EGR, inlet manifold tune valve), E-box fan do you believe it wont do any harm to the vehicle (mine is Diesel) to install it and see whether CC is functioning
30th Jul 2013 3:44 pm
Gudge
Member Since: 01 Apr 2013
Location: Herefordshire
Posts: 39
Well I got the cruise buttons from TLO (thanks for the great service again Nick) and fitted in a few mins. Guess what it works ! Just need Autologic to get the light on the dash, but no rush for that.
31st Jul 2013 8:10 am
scubasteve
Member Since: 30 Sep 2011
Location: dublin
Posts: 15
hello all,
anybody in the Dublin/ leinster region willing to activate the cruise control on my D3 TDV6?
i ll pay for your service. My local stealer claims it can't be done funnily enough, but then again he wanted to replace a complete air compressor at near €1172 inc labour and height sensors rather than just the faulty over pressure valve.
If anyone needing the switches for this I have a unit for sale ....
7th Nov 2013 10:00 pm
SteveMfr Site Sponsor
Member Since: 11 Jan 2011
Location: Strasbourg
Posts: 200
scubasteve wrote:
hello all,
anybody in the Dublin/ leinster region willing to activate the cruise control on my D3 TDV6?
i ll pay for your service. My local stealer claims it can't be done funnily enough, but then again he wanted to replace a complete air compressor at near €1172 inc labour and height sensors rather than just the faulty over pressure valve.
Just wanted to mention that the IIDTool will activate CC. Depending on how friendly the dealer is, cost will be 2-3 times the dealer visit. But you still have the IIDTool when you are done... 8)
Member Since: 30 Sep 2011
Location: dublin
Posts: 15
thank you for your reply,
I have the base 2.7 tdv6 with base S stereo, no sat nav screen, will I be able to operate the tool on my car or on an iphone? all the stuff i have seen has alvays been operated with the upper sound system.
11th Nov 2013 12:58 pm
edwardandtubs
Member Since: 23 Jun 2012
Location: Glossop
Posts: 459
Just fitted cruise control and stereo buttons to my GS - permagrin is back!!!!
Found that the CC works without enabling, although instrument doesnt light up - which I can live with for now. Discovery 4 HSE Luxury Santorini MY12
Discovery 3 GS Manual Java MY07 ( gone )
Mini Cooper S
13th Nov 2013 12:31 pm
SteveMfr Site Sponsor
Member Since: 11 Jan 2011
Location: Strasbourg
Posts: 200
scubasteve wrote:
thank you for your reply,
I have the base 2.7 tdv6 with base S stereo, no sat nav screen, will I be able to operate the tool on my car or on an iphone? all the stuff i have seen has alvays been operated with the upper sound system.
Hi Steve,
You should be able to operatethe IIDTool normally with the CC switchgear installed even if CC is not yet activated: the switchgear sends signals on the bus as soon as it is hooked up and the IIDTool will listen for these signals (the ECM ECU might not - though it seems a number of people have not required activation for CC to work 8) )
You will def be able to use an IIDTool BT with an iOS/Android app. Thes require nothing but the vehicle and the app (and gen 4 bluetooth...) www.gap-diagnostic.com
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
), ive been told (by DISCO MICKEY cheers 
) that CC requires fuse no 5 to be in place (in the engine bay box) and as per the wiring diagram this is the correct fuse from the SCM...
)
