Member Since: 10 Sep 2015
Location: Scotland
Posts: 178
Puncture, just finished changing the wheel now.
This must be a push for a set of dura tracs!!!!!!!!
How irresponsible to leave a screw somewhere for a big expensive tyre to stick to
22nd Jan 2016 8:35 pm
Mr Kington
Member Since: 12 Dec 2011
Location: Scottish Borders
Posts: 1552
About to replace bulbs in the xenons. Sidelights done courtesy of adf.James favourite hobby is writing in the third person.
23rd Jan 2016 8:27 am
.olli.
Member Since: 17 Dec 2015
Location: Hampshire
Posts: 83
Changed my tail / stop light to LEDs, and changed the infamous brake light switch as a bit of preventive maintenance!
[URL=]
Click image to enlarge
[/URL]
[URL=]
Click image to enlarge
[/URL]
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated
23rd Jan 2016 11:17 am
Mr Kington
Member Since: 12 Dec 2011
Location: Scottish Borders
Posts: 1552
So that was a pain in the . Did it and will wait until it is dark to test them out. Old bulbs didnt look that bad to be fair.James favourite hobby is writing in the third person.
23rd Jan 2016 1:37 pm
Mogwyth
Member Since: 03 Oct 2014
Location: Pwllheli
Posts: 3976
Investigated why heater was intermittent and temp gauge fluctuating:
==================================
05 D3 HSE V8 4.4
04 MG TF 135
03 MG TF 115 Cool Blue Edition
02 MG TF 160
00 Hymer B564 Lionheart
1971 Series III 109
Had Woody32 mend it............ ------------------------------
"Ruby"
Rimini Red 06MY TDV6 S
Xenons, Bright Pack, Climate Pack,
BAS Magic Box and Remap
ITG Air Filter
ERG's Blanked (Woody32)
Huge Permagrin
Member Since: 19 Jan 2015
Location: Caerphilly
Posts: 2256
Drove up to pen y fan base camp in mine with swmbo and 2 friends to go for a walk. Sideways in the wind at the top. Jarrod
Current : D3 2007 HSE - AKA the lemon
-beanie grille
-detango with led bulbs
-club body off rebuild. TWICE.
23rd Jan 2016 5:43 pm
SN
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
Refitted my Blackvue and plumbed in the Video-Out into the back of my Pioneer AVIC-F70DAB
Click image to enlarge
And designed a 3D model of a blanking plug which I can modify to receive a new switch and then 3D Print it!
Click image to enlarge
None of this was in a Disco but the jobs are relevant...Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
23rd Jan 2016 8:58 pm
Tiggerrr
Member Since: 07 Jul 2014
Location: Chester
Posts: 133
Rear parking sensors replaced
Replaced rear parking sensors today on my 05 D3. What a faff!!! Took me ages just to get the mud flaps off!! Decided to not put them back on ! Everything now working fine ! Phew need a lay down now...Beanie grill , detangoed , waxoiled, disco3 sticker, rear tints, spare wheel protector, fantastic BAS Remap, three flash indicators, reverse lights follow me home. EGRs blanked. AMK compressor upgrade. D4 rear lights. DAB radio replacement.
29th Jan 2016 4:09 pm
kimmea
Member Since: 30 Nov 2015
Location: Aberdeenshire
Posts: 290
SN wrote:
Refitted my Blackvue and plumbed in the Video-Out into the back of my Pioneer AVIC-F70DAB
Click image to enlarge
And designed a 3D model of a blanking plug which I can modify to receive a new switch and then 3D Print it!
Click image to enlarge
None of this was in a Disco but the jobs are relevant...
29th Jan 2016 4:12 pm
Slapheadyeti
Member Since: 12 Jul 2015
Location: South Kent
Posts: 44
Fitted a new N/S/F Outer CV Gaitor and MOT'd it.
Straight through.Im a mechanic and have Snap On Solus Ultra should anyone need help.
29th Jan 2016 5:15 pm
Slobbox
Member Since: 10 Jul 2015
Location: Ribble Valley
Posts: 307
Replaced O/S/Rear brake caliper, new brake pads front and rear, noticed i had a soft tyre with a big nail in it so took it to get a puncture repaired, then give it a clean.
30th Jan 2016 5:15 pm
.olli.
Member Since: 17 Dec 2015
Location: Hampshire
Posts: 83
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
. Did it and will wait until it is dark to test them out. Old bulbs didnt look that bad to be fair.
