Member Since: 15 Jan 2016
Location: GL
Posts: 10562
MOT Wheel Size
Hi
Would my car pass its MOT if I had 22" wheels on the rear and 19" on the front ?
Thanks
20th Jul 2024 10:45 am
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 783
probably not but i suppose its down to how well you know the tester and how well he knows the regulations not much help i know but you should really have matching tyres all round on any 4x4 vehicle please excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
20th Jul 2024 11:16 am
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6310
Re: MOT Wheel Size
Pete K wrote:
Hi
Would my car pass its MOT if I had 22" wheels on the rear and 19" on the front ?
Thanks
WHy would you have that in the firts place WOW
20th Jul 2024 12:16 pm
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 77
Is this what you're aiming for?
Click image to enlarge
I think as long as the wheels/tyres on the same axle match, it might be ok. I'm guessing it's not going to be a permanent thing?Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
20th Jul 2024 3:56 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10562
Just wanted to put some tyres on it that don't have cracks, without changing all 4 wheels.
Don't really want to fit new tyres as it will probably just get parked up again
20th Jul 2024 3:59 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20787
For an MOT, it can have different size wheels front to rear, as long as they are the same size across each axle
Whether the drive train will cope is another question My D3 Build Thread
As long as rolling circumference is the same, you should be fine..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
20th Jul 2024 9:46 pm
Dondiddy
Member Since: 26 Dec 2019
Location: Hamilton
Posts: 308
Cracked or perished tyres would need to be very very bad to fail an MOT. Badly perished tyres normally end up getting an advisory during a test but it can again depend very much on the individual tester. Might be worth asking at the test garage what they think before spending money or messing about changing wheels around and potentially causing transmission damage with mismatched tyres.
22nd Jul 2024 10:18 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10562
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum