maplecottage
Member Since: 01 Feb 2011
Location: Norfolk
Posts: 3171
  
|
Dave M wrote:The only thing I can think of that I've maybe done incorrectly is connect the red wire on port 2 of the FBH connector with a scotch clip rather than directly into the odb cable. Would that be causing the issue as it's still connected into the cars system?
Break the connection to the vehicle to prevent any unwanted control signal reaching the FBH. It's not required.
I used a crimp connector then I can swap at will between my BAS remote controller and the Webasto loom.
Steve
|
 12th Dec 2014 3:29 pm |
|
|
Sydney
Member Since: 11 Aug 2013
Location: St Neots
Posts: 903
|
Spent two hours today trying to connect with no joy, just bit the bullet and bought a serial connector rather than the USB so hopefully may have better luck in the future, bloody thing... De-Tango
V8 Brakes
EGRs blanked
Running boards
3 flash indicators and clock on dash
Blingy grille...
|
| 12th Dec 2014 5:59 pm |
|
|
barrowd3
Member Since: 10 Dec 2014
Location: leeds yorkshire
Posts: 31
|
I have got a kkl usb to obd lead got the webasto soft wear and I have connected pin 16 to live on the battery pin 5 to earth on the battery and pin 7 to pin 2 on the fbh plug and I can not get it to connect it just says the selected com port can not be used etc how do I connect to it please help 
|
| 13th Dec 2014 12:09 pm |
|
|
barrowd3
Member Since: 10 Dec 2014
Location: leeds yorkshire
Posts: 31
|
I have done a loom and made wires up etc but I cant connect please help it just says the selected com port can not be used how do I connect to the dam thing
|
| 13th Dec 2014 12:19 pm |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18506
|
Sounds like you have it connected up OK, but you have a driver or software issue on your computer.
Follow stage 2 here (ignore that it's for VW software)
http://www.gendan.co.uk/faq/409_win7.php
Then make sure you use the same COM port in ThermoTest.
For the D3, under "Device Selection", choose WBUS 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 13th Dec 2014 12:35 pm |
|
|
barrowd3
Member Since: 10 Dec 2014
Location: leeds yorkshire
Posts: 31
|
| please help webasto FBH cant connect !! |
|
well hello chaps help needed I cant connect to the webasto I have followed the diagram off hear on another post but it just keeps saying the com port used can not be selected etc tired auto selection etc but still wont connect it really starting to bug me as it is getting rather chilly and it takes the car for ever to get warm any help is very much appreciated
|
| 13th Dec 2014 12:38 pm |
|
|
barrowd3
Member Since: 10 Dec 2014
Location: leeds yorkshire
Posts: 31
|
hi martin I have just replugged my usb lead in to my lap top and it came up with usb seriel com 3 installed does this mean it will work now will the webasto soft wear connect now ? thanks
|
| 13th Dec 2014 12:59 pm |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18506
|
Have you tried it?
I cannot say it WILL work, but you need to follow the steps to get it installed and configured OK.
There can be any number of issues which could prevent it connecting even if the set up and wiring is OK.
But if you know the wiring and config is completely right then you can start to look elsewhere. 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 13th Dec 2014 1:02 pm |
|
|
barrowd3
Member Since: 10 Dec 2014
Location: leeds yorkshire
Posts: 31
|
manage to get it connected ish now it just says on the webasto soft wear wtt install
|
| 13th Dec 2014 1:23 pm |
|
|
barrowd3
Member Since: 10 Dec 2014
Location: leeds yorkshire
Posts: 31
|
I am now in to it but how do I make it run to try and start the heater
|
| 13th Dec 2014 1:32 pm |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18506
|
In the toolbar at the top, there is an icon called "park heating".
If it is not running by itself you will need to look at and review the faults first though.
Can you please provide some feedback about what made the connection work? 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 13th Dec 2014 1:35 pm |
|
|
barrowd3
Member Since: 10 Dec 2014
Location: leeds yorkshire
Posts: 31
|
when I click on that it just does nothing it says interlock in my overview screen and it was just the earth pin from 5-4 that did it it just brung its self up but now at another stage I cant get it to run
|
| 13th Dec 2014 1:41 pm |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18506
|
You need to clear that fault! 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 13th Dec 2014 1:42 pm |
|
|
barrowd3
Member Since: 10 Dec 2014
Location: leeds yorkshire
Posts: 31
|
I have I went on fault on the tool bar then clear fault and still says interlocked 2
|
| 13th Dec 2014 1:43 pm |
|
|
barrowd3
Member Since: 10 Dec 2014
Location: leeds yorkshire
Posts: 31
|
my fault code is flame was detected prior to combustion :S whats this mean then I need a new unit
|
| 13th Dec 2014 2:08 pm |
|
|
