qwick69
Member Since: 30 Mar 2011
Location: cambridgeshire
Posts: 99
  
|
Given up...Changing Car
|
 24th Aug 2016 6:59 am |
|
|
Dannyson
Member Since: 14 Oct 2014
Location: Newquay, Cornwall
Posts: 820
|
 Oh! ..... what to another one or a different make? 2016MY Discovery HSE - Black
2009MY Toyota Land Cruiser (Lc4) - Black
|
| 24th Aug 2016 10:08 pm |
|
|
peteyd
Member Since: 08 Mar 2016
Location: South Bucks
Posts: 551
|
LTB00963 Is being applied to my car today. Will update when I get it back. My specific issue was needing to slowly turn up the temperature dial to maintain a steady cabin temperature. After a long run, needed to dial 25 degrees to achieve a cabin temp of 21. MY16 D4 Graphite in Loire Blue
|
| 18th Oct 2016 12:54 pm |
|
|
qwick69
Member Since: 30 Mar 2011
Location: cambridgeshire
Posts: 99
|
Still have my car as I am awaiting my replacement which was on a four month delivery. Heating still no good. Chilly this morning, turned heater up to 27, still did not blow out hot air. I had forgotten how bad it was. Cant wait for the car to go and I can get into something that works.
|
| 18th Oct 2016 1:57 pm |
|
|
peteyd
Member Since: 08 Mar 2016
Location: South Bucks
Posts: 551
|
That's not good. Mine does get warm, but you have to adjust the dial regularly.
What are you moving to? MY16 D4 Graphite in Loire Blue
|
| 18th Oct 2016 2:22 pm |
|
|
qwick69
Member Since: 30 Mar 2011
Location: cambridgeshire
Posts: 99
|
Going to try a RRS. I am just hoping that this D4 was a Friday afternoon vehicle (too many faults to mention), and that the Sport is OK.
|
| 18th Oct 2016 2:27 pm |
|
|
peteyd
Member Since: 08 Mar 2016
Location: South Bucks
Posts: 551
|
Well, that worked out well.
Dealer took a look at the car and said it didn't need the work doing. So I have bought a thermometer and need to provide photographic evidence. MY16 D4 Graphite in Loire Blue
|
| 18th Oct 2016 6:26 pm |
|
|
BigT
Member Since: 11 Dec 2015
Location: Staffordshire
Posts: 56
|
Pete
I have a sensor plugged set up with a display linked to an iPhone. Then have camera set up recording actual v temp setting.
Interesting results!!
Tony
|
| 18th Oct 2016 10:58 pm |
|
|
qwick69
Member Since: 30 Mar 2011
Location: cambridgeshire
Posts: 99
|
I wouldnt bother doing any of that. The answer will be "it is working within manufacturers tolerance".
I went through the same process over 6 months with the car going back on numerous occassions, hence why i "gave up"
|
| 19th Oct 2016 7:12 am |
|
|
peteyd
Member Since: 08 Mar 2016
Location: South Bucks
Posts: 551
|
BigT wrote:Pete
I have a sensor plugged set up with a display linked to an iPhone. Then have camera set up recording actual v temp setting.
Interesting results!!
Tony
I think I'll just use a basic thermometer, but which sensor do you have that works with your iPhone?
My issue isn't that bad. Just means I need to play with the temperature dial now and then. I can get hot and cold air aplenty, just have to find the balance. MY16 D4 Graphite in Loire Blue
|
| 19th Oct 2016 7:19 am |
|
|
BigT
Member Since: 11 Dec 2015
Location: Staffordshire
Posts: 56
|
Pete
I have several sensors at the moment, but the iPhone one is:
https://www.thermodo.com
Tony
|
| 19th Oct 2016 9:03 am |
|
|
Powerflex
Member Since: 17 Aug 2013
Location: London
Posts: 5
|
Is this issue now resolved with the updates?
|
| 15th Nov 2016 11:46 am |
|
|
nazca sand eddie
Member Since: 29 Oct 2015
Location: England
Posts: 41
|
A follow-on from my update of 13 Aug 16.
LTB00908 - Outside ambient temperature is now spot on, still need some really cold weather to test the ice alert warning.
LTB00963 - HEVAC seems now to be under control. Before the fan had a mind of it's own. I now get warm air from the foot wells and screen and not from the 4 round face vents, which I assume is correct. When cooling is needed, then air comes out of all vents. However, comparing this heating system to my previous 3 Freelanders (1xF1 and 2x F2) it takes much longer to warm up the car. The Freelanders were almost instant heat, the Disco4 takes a mile or two to start giving out warm air.
.
|
| 15th Nov 2016 12:56 pm |
|
|
Powerflex
Member Since: 17 Aug 2013
Location: London
Posts: 5
|
Many thanks
Nene are doing the updates for me and it is interesting that they say the 963 update is a foam insulator
|
| 15th Nov 2016 1:13 pm |
|
|
nazca sand eddie
Member Since: 29 Oct 2015
Location: England
Posts: 41
|
" a foam insulator "
I would think that it must be more than that.
The difference in how mine now operates suggests something else as well; perhaps a software update or other adjustment/alteration.
|
| 15th Nov 2016 3:09 pm |
|
|
