Member Since: 15 Jan 2017
Location: Down South
Posts: 25
Hey all, just wondering if anyone else has noticed this.
Pulled my screen out tonight to do the wire removal, and I noticed that the centre wire that you disconnect only connects to two return wires in that plug. They don't connect to anything else on the circuit board for the hard buttons. I took a chance and disconnected the other two, one at a time, and found that if second wire only is disconnected you get all the RR screens but can still control the brightness...
Have left mine set like this so I will report back once I have driven the car in daylight...
Wiggs, if you're still around, or anyone else, are you able to shed any more light on this? No pun intended.
My beast is an Aussie 2005 D3 HSE
17th Jun 2022 12:52 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10669
Well the light sensor is below the Rev counter. Next to the alarm light.
Cover it up with a dark cloth (in this sunshine ) and see if display changes.
I thought you only cut one wire so am confused
17th Jun 2022 12:57 pm
ChrisL76
Member Since: 15 Jan 2017
Location: Down South
Posts: 25
Yeah I was all set to do as the post said and just happened to look at the circuit board, then the brain started ticking...
It's all back together now, with only one wire disconnected. It's the second from one end but I will have to clarify which end.
17th Jun 2022 1:04 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
@ ChrisL76
Pete his suggestion
Quote:
Cover it up with a dark cloth (in this sunshine ) and see if display changes.
is not answered yetBest regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
17th Jun 2022 1:48 pm
ChrisL76
Member Since: 15 Jan 2017
Location: Down South
Posts: 25
Now that the sun is up down under, I'll endeavour to resolve the curiosities!
18th Jun 2022 12:04 am
Welsh Tonga
Member Since: 08 May 2022
Location: Aberystwyth
Posts: 11
Any further news on this Chris? The suspense is killing me Ta2005 D3 2.7 TDV6 SE+
EGR taken a hike, and I like
27th Jun 2022 11:32 am
ChrisL76
Member Since: 15 Jan 2017
Location: Down South
Posts: 25
Ok, quick update.
I disconnected the SECOND wire from the yellow end of the plug instead of the fourth, or middle wire.
Everything seems to function exactly as described in previous posts.
I can adjust the screen brightness to a very acceptable level (even for australia) using the screen controls and it seems to dim with the headlights. It doesn't seem to change with ambient light though, so I think we are pretty much the same as using the 4th wire. I run daytime running lights and they don't dim the screen.
Happy to answer questions.
5th Jul 2022 8:16 am
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1271
Hi Chris, realy interested as the only thing that’s been putting me off this is the brightness.
Can you clarify the wire you removed? Original fix was the 4th from the RED end, but you removed the 2nd from the YELLOW end? (So 6th wire from the red?)
2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
5th Jul 2022 9:53 am
ChrisL76
Member Since: 15 Jan 2017
Location: Down South
Posts: 25
Yep, that's correct. 2nd from the top in your photo.
I also tried the 3rd wire from the top (in your photo) and it didn't do anything, it it stayed in D3 mode.
It's been in RR mode since the day I put my first post and I've had no problems yet.
5th Jul 2022 10:44 am
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1271
Cool, out come the cutters lol2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
5th Jul 2022 10:45 am
ChrisL76
Member Since: 15 Jan 2017
Location: Down South
Posts: 25
I didn't cut mine, I removed the pin from the plug so I can reverse it, but the plan is to put a switch on it.
5th Jul 2022 10:48 am
DiscoKick
Member Since: 19 Jun 2021
Location: London
Posts: 80
Hi Chris,
Do you have a reversing camera, and with this wire pulled does it go into camera when you go to reverse?
Reason I ask, is I installed a reversing camera, and it does work (Went into the special Menu and could see the camera working.)
From my understanding on these threads the RR mode should make the camera come on automatically, however this isn't the case, with the second from yellow side pulled.
3rd Feb 2023 9:45 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10669
You need a gap iid £500 to edit Ccf
To say a camera is fitted
3rd Feb 2023 9:48 pm
DiscoKick
Member Since: 19 Jun 2021
Location: London
Posts: 80
I think, i've done that..
Got the tool, enabled the camera, but clearly something isn't right from my side
3rd Feb 2023 9:51 pm
Paul190h
Member Since: 09 Mar 2023
Location: Swanmore, Southampton
Posts: 6
KevinD3 wrote:
Hi Chris, realy interested as the only thing that’s been putting me off this is the brightness.
Can you clarify the wire you removed? Original fix was the 4th from the RED end, but you removed the 2nd from the YELLOW end? (So 6th wire from the red?)
I'm a new guy here, this looks like a really good modification, I have read through many pages of this. So definitely the 2nd wire from the top and no adverse issues?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Ta
