Member Since: 14 Sep 2015
Location: Lincolnshire
Posts: 484
Starting to get really cold here now so had the IID tool out and fired up the FBH to check for faults. Other than smoking the place out no faults and ran in test mode for a few minutes then went into the cool down mode.
30th Oct 2018 7:08 pm
Chris x
Member Since: 08 Jun 2017
Location: England
Posts: 98
Whats cool down mode?
31st Oct 2018 9:34 am
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
1. Fuel pump OFF and flame OFF
2. Webasto fan and water pump still working for cool the heater for few minutes
3. full stop of the WebastoDiscovery 5 tdv6 HSE Corris Gray Outback Engineering Limited Edition
IID Pro MV License
31st Oct 2018 12:28 pm
Rsneil
Member Since: 12 Aug 2017
Location: Derby
Posts: 30
Click image to enlarge
Gave the bay a clean up.... Was on my list to do for so long 😀
31st Oct 2018 3:57 pm
life - live it
Member Since: 14 Apr 2017
Location: Behind you
Posts: 1025
Took the D3 for an MOT. Was thinking the worst as she has 176k miles on the clock.
She passed with a couple advisories on the anti roll bar linkage pins
Happy days
3rd Nov 2018 9:59 pm
Pete199
Member Since: 21 Feb 2016
Location: Preston, Lancashire
Posts: 187
Fitted RLD sump guard. Top quality piece of kit. Nice to meet you yesterday Ray.
4th Nov 2018 3:55 pm
Paddington
Member Since: 30 May 2013
Location: Southampton
Posts: 280
Fitted one of these FBH controllers today all done in under a hour and works a treat.
Member Since: 28 Jul 2017
Location: Lincoln
Posts: 208
Passed it’s MOT with no advisories
I did fit discs and pads all round at the weekend though!
D4 MY15 (64) SE Tech, Loire Blue
Front Runner Rack and ladder
16th Nov 2018 7:05 pm
Pip66
Member Since: 26 Sep 2016
Location: Ely.
Posts: 170
New rear pads and changed the oil in the transfer box and diffs.2008 G4 D3 vehicle No 11. UK selections.
2003 G4 D2 vehicle No 125. South African workshop car.
17th Nov 2018 4:06 pm
Jumper9895
Member Since: 10 Jun 2015
Location: Swanmore, Southampton
Posts: 226
Fitted new bonnet release cable........will almost be a pleasure now to open and close bonnet! Best Regards,
Dave.
[URL=][/URL]
27th Nov 2018 6:24 pm
life - live it
Member Since: 14 Apr 2017
Location: Behind you
Posts: 1025
Decided to rotate the wheels today.
Jacked one side up , then the jack packed in whilst the vehicle was in mid air ffs
Used 2 x standard jacks to remove the trolley jack
21st Dec 2018 7:10 pm
tut_gareth
Member Since: 10 Dec 2018
Location: West Byfleet
Posts: 135
Today I became a Discovery 3 owner...
24th Dec 2018 9:51 pm
garfield2
Member Since: 24 Jul 2008
Location: morley, leeds
Posts: 314
Had 4 duratracs and new rims fitted today
Regards
Martin
Discovery 4.5 HSE 2015 MY
Discovery 3 SE 2007 MY gone with spinning journals
24th Dec 2018 10:04 pm
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873
I’ve come to terms that my discovery 3 has been wrote off by a in a punto causing £5,500 damage and not a panel has a scratch Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
24th Dec 2018 11:13 pm
life - live it
Member Since: 14 Apr 2017
Location: Behind you
Posts: 1025
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum