grillphil
Member Since: 11 Jun 2014
Location: Waltham Cross
Posts: 216
  
|
Skippy_fx140 wrote:Grillphil.
I have the same usb cable as you have and mine works fine, you say that you have used pin 4 and 5 but have you linked them together as some people do? It’s just a thought 
I made my own cable up that has pin probes on and it works fine and I can use pin 4 or 5 and if necessary as I can link both together, you could also buy one of the leads that Martin the forum owner sells, they work well and they have pins 4 and 5 linked out might be worth a try
On a side note guys I couldn’t get to sleep this morning so I was outside with my two closest friends that were being chased up the road by a brass monkey, at 03:00hrs I pressed the lr button and low and behold the FBH fired up, so I was grinning like the cat that got the cream again, so now I will wait until tomorrow and try is again
Twas you Skippy. It must have stuck in the back of my mind.
Cheers again. Phil 
|
 5th Mar 2015 3:57 pm |
|
|
Skippy_fx140
Member Since: 24 Dec 2014
Location: Near Hull, East Yorkshire.
Posts: 46
|
Pleased that its running ok for you and it may be worth doing as I did ad let it burn up a bit of fuel over a few days to blast the crap out, also they smell nice when they are running or is it me that has a strange sense of smell 
As for linking pin 4 and 5 it was one of the first things that I picked up from reading all the posts on the forum they maid good bedtime reading Cheers Skippy.
The road to success is always under construction.
ÊŽÉqÇ uo pɹÉoqÊŽÇÊž É ÊŽnq ı Çɯıʇ ʇsÉן Çɥʇ sı sıɥʇ
|
| 5th Mar 2015 4:18 pm |
|
|
