Member Since: 26 Mar 2007
Location: Chandler's Ford
Posts: 3464
All LEDs fitted. 8)
Have to say, the original D3 rear clusters look awesome with the big red tail light LEDs in! The colour intensity of the red tail/stop lights and the amber of the repeaters is something else. There's none of the sub-second fade in/fade out with LEDs that you get with halogen bulbs; illumination is immediate. Supplied resistors also work fine on the rear repeaters.
Now, to source some LR D3 xenon headlamp units to do the front end and wait for the revised reversing LEDs to come in...
When you come down to Southampton, Ian, you will not miss my D3 on the M3!
Great upgrade.
Steve2021 BMW iX3 Premier Edition in Carbon Black ⚡️🔌
2019 Škoda Kodiaq 2.0 Tdi 190 DSG Sportline in Quartz Grey. Excellent vehicle. Gone.
2017 Discovery Sport HSE Auto in Carpathian Grey and Ebony Leather. Modern JLR Junk. Gone.
2007 Discovery 3 TDV6 S Manual in Zermatt Silver with Ebony Cloth (143k) Gone, but now patrolling the Asia section of the West Midlands Safari Park!
6th Feb 2013 12:53 pm
ruben D3 Decade
Member Since: 26 Sep 2006
Location: ASTURIAS
Posts: 2439
could explain a bit how to mount resistance to the rear repeaters?
thanks in advance lost in translation!
DISCOVERY 3 SE man. TDV6 2006, my true love!
DEFENDER 2 SE D I6 MHEV 2024, other live.
6th Feb 2013 6:06 pm
Woolmeister
Member Since: 26 Mar 2007
Location: Chandler's Ford
Posts: 3464
The resistors are supplied with connectors that you can use to attach the resistors to the existing rear cluster wiring loom. The connectors are of the Cable Lock variety; kind of like these:
I put some heat shrink tubing over the exposed wires of the resistors before using the cable lock connectors to wire the resistors in parallel to the new LED bulb. The connectors just snap shut and strip a small amount of insulation as they snap shut. I did not mount the resistor to any part of the light as I understand they can get quite hot if used for prolonged periods of time. They are just suspended by the wires either side, to allow the air to circulate around them. If this turns out to be a problem, I will look at mounting them somewhere where they will not damage the plastic of the rear light cluster but they seemed fine like that.
I'll take some photos next time I have the rear clusters off to fit some reversing LEDs.
They seem to work OK. No bulb out indication from the speaker in the dash (fast flashing).
Photos will follow, but not for a while...
Steve2021 BMW iX3 Premier Edition in Carbon Black ⚡️🔌
2019 Škoda Kodiaq 2.0 Tdi 190 DSG Sportline in Quartz Grey. Excellent vehicle. Gone.
2017 Discovery Sport HSE Auto in Carpathian Grey and Ebony Leather. Modern JLR Junk. Gone.
2007 Discovery 3 TDV6 S Manual in Zermatt Silver with Ebony Cloth (143k) Gone, but now patrolling the Asia section of the West Midlands Safari Park!
6th Feb 2013 6:17 pm
ruben D3 Decade
Member Since: 26 Sep 2006
Location: ASTURIAS
Posts: 2439
thanks for your quick response Steve
lost in translation!
DISCOVERY 3 SE man. TDV6 2006, my true love!
DEFENDER 2 SE D I6 MHEV 2024, other live.
6th Feb 2013 6:39 pm
Bloke
Member Since: 06 Jul 2012
Location: North West
Posts: 24
hids4u wrote:
The reversing lamps are not brighter than the original ones, but hang fire we are about to get some more that should be
Best Regards Ian
Any news on these Ian?
Paul.
12th Feb 2013 1:04 pm
rykard
Member Since: 29 Apr 2012
Location: Leicester
Posts: 310
the rear tail/brake light leds were fitted tonight. OMG!! what a difference.
Thanks Iancheers
Rich
55 D3 V8 HSE auto
68 Stelvio 2.2 Speciale
14th Feb 2013 9:34 pm
JDB
Member Since: 25 Mar 2010
Location: NW Hampshire
Posts: 2486
hids4u wrote:
The reversing lamps are not brighter than the original ones, but hang fire we are about to get some more that should be
Best Regards Ian
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
The colour intensity of the red tail/stop lights and the amber of the repeaters is something else. There's none of the sub-second fade in/fade out with LEDs that you get with halogen bulbs; illumination is immediate. Supplied resistors also work fine on the rear repeaters.
