Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Technical (D3)

Over heating
Post Reply  Down to end
Page 1 of 2 12>
B*rry
 


Member Since: 11 Jul 2012
Location: Uk
Posts: 6

Over heating

Hi
Could somebody please help me
My d3 se manual is over heating and loseing coolant.
Also the heater only works when I am traveling at speed.
I've just had her pressure tested and she's ok and had a new water pump fitted
But I'm still loseing water.
Please help
  
Post #95493115th Jul 2012 3:00 pm
View user's profile Send private message View poster's gallery Reply with quote
M3DPO
 


Member Since: 22 Sep 2010
Location: Notts.
Posts: 8154

England 2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris GreyDiscovery 4

Could be an airlock in the system, try sqeezing the pipes with the engine running to get the air out or a cylinder head gasket, to test fill the water up to the brim with the engine running, then with the filler cap off look for air bubbles coming out of the water, if there are bubbles its one of the cylinder head gaskets, remember to remove some water after to the correct level.
 It can when others can't,
It will when others won't,
It goes where others don't. 
 
Post #95493815th Jul 2012 3:49 pm
View user's profile Send private message View poster's gallery Reply with quote
Gareth
Site Moderator 


Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26744

United Kingdom 

I presume you know its overheating because its actually boiling over? Where is the coolant dripping from? A bit more info needed really Thumbs Up
  
Post #95494215th Jul 2012 3:53 pm
View user's profile Send private message View poster's gallery Reply with quote
B*rry
 


Member Since: 11 Jul 2012
Location: Uk
Posts: 6


Hi guys
Thanks for your replys
I will try the water test.
Just one more question I've had it pressure tested and a snif test and both came back good!
Do you think it could still be the gasket? Also there's no smoke coming out the back and when she is not over heating she drives ok.
What do you think!!!!!!!!
Than again for speedie replys
  
Post #95494715th Jul 2012 4:09 pm
View user's profile Send private message View poster's gallery Reply with quote
Kingmav66
 


Member Since: 20 Jul 2010
Location: Gloucestershire
Posts: 1349

England 2006 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

Have you vented the system correctly while filling?
i.e. at the expansion bottle return pipe spigot, and the vent pipe that is at the front of the engine under the plastic cover....
  
Post #95494915th Jul 2012 4:17 pm
View user's profile Send private message View poster's gallery Reply with quote
B*rry
 


Member Since: 11 Jul 2012
Location: Uk
Posts: 6


Hi
No I dont think so could you let me know how to do it? Bit of a novice.
Thanks Thumbs Up
  
Post #95495115th Jul 2012 4:38 pm
View user's profile Send private message View poster's gallery Reply with quote
hugeviking
 


Member Since: 08 Jun 2010
Location: cotswolds
Posts: 1482

United Kingdom 2006 Discovery 3 TDV6 S Manual Cairns BlueDiscovery 3

Thermostat failed fully/partially closed Question

Andi
  
Post #95495315th Jul 2012 4:41 pm
View user's profile Send private message View poster's gallery Reply with quote
Kingmav66
 


Member Since: 20 Jul 2010
Location: Gloucestershire
Posts: 1349

England 2006 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

I don't know if this is the LR way but this is how I did it. On the left hand side of the expansion tank is a small pipe, right next to it is a black (bleed) screw with a cross in top, undo it. Then remove the black plastic cover from the top of the engine, at the front top you should see another one of those black (bleed) screws, but this one is on the end of a rubber pipe. Remove this one, then fill the system etc.
Just another tip, the coolant level is easier to check by removing the headlight and looking through from that side Thumbs Up
  
Post #95497315th Jul 2012 5:19 pm
View user's profile Send private message View poster's gallery Reply with quote
B*rry
 


Member Since: 11 Jul 2012
Location: Uk
Posts: 6


Thank you all
I will let you know how I get on Thumbs Up
  
Post #95498515th Jul 2012 5:44 pm
View user's profile Send private message View poster's gallery Reply with quote
Russell
 


Member Since: 24 Aug 2007
Location: Kent
Posts: 10564

United Kingdom 

Did you have the issue before the water pump was replaced or did you have that done to try to fix the problem.
 MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club 
 
Post #95501015th Jul 2012 6:36 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
B*rry
 


Member Since: 11 Jul 2012
Location: Uk
Posts: 6


I replaced the water pump to try and fix the problem, there was some pink residue on it and thought that was the leek! Had the v fan replaced as well as a new cap on the header tank.
  
Post #95501815th Jul 2012 6:54 pm
View user's profile Send private message View poster's gallery Reply with quote
Nimrod
 


Member Since: 16 May 2012
Location: Warwickshire
Posts: 71

United Kingdom 

is there any coolant in the sump or oil in the coolant?
have you had the radiator pressure tested..?
  
Post #95515116th Jul 2012 3:47 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Russell
 


Member Since: 24 Aug 2007
Location: Kent
Posts: 10564

United Kingdom 

Nimrod wrote:
is there any coolant in the sump or oil in the coolant?
have you had the radiator pressure tested..?

He says he has had it tested above and all clear
 MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club 
 
Post #95516516th Jul 2012 7:33 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
amazing
 


Member Since: 05 Mar 2011
Location: chengdu
Posts: 1542

China 2011 Discovery 4 3.0 SDV6 HSE Auto Santorini BlackDiscovery 4

if you can feel the hose out from thermostat if its just warm compared to the other hoses it may not be opening
air lock seems likely but if not..

remove thermostat then try again. this can increase the flow and reduce air pockets also you can also check it while its out.

also consider

blocked radiator( unlikely but not impos)

kinked hose ( possible)
viscous fan duff(maybe)
dodgy radiator cap( low pressure in system .should be around 15psi again squeeze a hose)


other engine issues you seem to have eliminated

have fun
 It is better to have and not need it then need and not have it.  
Post #95518716th Jul 2012 9:42 am
View user's profile Send private message View poster's gallery Reply with quote
dingdongs
 


Member Since: 30 May 2012
Location: St. Lawrence Bay Essex
Posts: 186

England 2011 Discovery 4 3.0 TDV6 GS Auto Zambezi SilverDiscovery 4

how about air in the heater matrix.should get warm .check flow and return pipes to the matrix.
  
Post #95554817th Jul 2012 12:01 am
View user's profile Send private message View poster's gallery Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 1 of 2 12>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site