|
|
flydive
Member Since: 21 Aug 2007
Location: Lugano
Posts: 1535
|
You say you have one wire missing?
in the bundle "D" in the picture in the install manual you shoul ha 7 wires
Black, Brown, Red, Yellow, Green, Blue and Purple
|
 15th Jan 2011 5:05 pm |
|
|
arhrrs
Member Since: 08 Dec 2010
Location: west midlands
Posts: 34
|
I have got black, brown, red, orange, green, black, purple
On my manual it shows 8 wires which include yellow and orange
I have found that the yellow wire from plug A is connected to the white/red to the cigerette lighter
Last edited by arhrrs on 15th Jan 2011 5:39 pm. Edited 1 time in total
|
| 15th Jan 2011 5:31 pm |
|
|
flydive
Member Since: 21 Aug 2007
Location: Lugano
Posts: 1535
|
well, do not believe that is correct, unfortunately I do not have a harness to compare, mine being installed and now is dark outside.
But as I installed it according to the instructions it should have been there.
Hopefully Flack or someone else is going to drop in with more informations.
|
| 15th Jan 2011 5:38 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6272
  
|
arhrrs
What plug are you struggling with, is it the GSM harness or the IPCU harness end.
Flack 
|
| 15th Jan 2011 5:59 pm |
|
|
arhrrs
Member Since: 08 Dec 2010
Location: west midlands
Posts: 34
|
The long yellow wire ( for the FBH) comes from the GSM plug (B) and this has 7 wires in the plug with the purple wire being the missing one.
Plug A has all 8 wires, but I only have 7 wires at D with the yellow one missing, if I follow the yellow wire from plug A it travels down the loom as a single wire covered in the black tape and changes to the white/red wire at E
If I am right the orange wire is to be connected to the red/white for a live feed
|
| 15th Jan 2011 5:59 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6272
|
yes bud connect as you discribe
Flack
|
| 15th Jan 2011 6:01 pm |
|
|
arhrrs
Member Since: 08 Dec 2010
Location: west midlands
Posts: 34
|
Flack, It is the fan control box plug A which provides most of the wires at D for connecting, it is here at D that I do not have the yellow wire to complete the connections when you cut the yellow/red wire and join one side to green wire and the other to yellow ( which is not there)
|
| 15th Jan 2011 6:07 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6272
|
arhrrs wrote:Flack, It is the fan control box plug A which provides most of the wires at D for connecting, it is here at D that I do not have the yellow wire to complete the connections when you cut the yellow/red wire and join one side to green wire and the other to yellow ( which is not there)
ok bud have you stripped the black cover back in the loom to see if its been tucked in the there somewhere, it won't work without it. Can you take a picture of the loom so we can see it.
Flack
|
| 15th Jan 2011 6:11 pm |
|
|
arhrrs
Member Since: 08 Dec 2010
Location: west midlands
Posts: 34
|
The yellow wire I should have at bundle D, where doe's it come from?
|
| 15th Jan 2011 6:12 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6272
|
arhrrs wrote:The yellow wire I should have at bundle D, where doe's it come from?
it should be on the plug to the IPCU on the multi block connector, I am at my daughters at the moment but give me ten mins and I will look at mine .. Have a brew
Flack
|
| 15th Jan 2011 6:17 pm |
|
|
arhrrs
Member Since: 08 Dec 2010
Location: west midlands
Posts: 34
|
The yellow wire is at the IPCU plug but branches off on it's own after 6" in the main loom, it is bound in black tape and when it appears out of the tape it is white/red, you can feel the solder joint under the tape where the join is. It is the only wire in the taped run.
|
| 15th Jan 2011 6:35 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6272
|
Hi bud the yellow wire goes to the connector block on the IPCU can you see it on the connector end . Just stripped mine down and its defo there.
It looks like they have made the wire to short if its connected to the yellow wire then connect the red/white to the other end of the HVAC connector
Flack
|
| 15th Jan 2011 6:37 pm |
|
|
arhrrs
Member Since: 08 Dec 2010
Location: west midlands
Posts: 34
|
It is at the connector block. All 8 wires as there should be.
If you follow your white/red wire back from the cigerette lighter where does that go?
|
| 15th Jan 2011 6:44 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6272
|
arhrrs wrote:It is at the connector block. All 8 wires as there should be.
If you follow your white/red wire back from the cigerette lighter where does that go?
My white / red wire goes in to the loom and I think the white/ red wire is connected to the black wire that is on the plug I think. The red white wire opens the vents to let warm air in.
Flack
|
| 15th Jan 2011 6:53 pm |
|
|
arhrrs
Member Since: 08 Dec 2010
Location: west midlands
Posts: 34
|
My white/red wire is definitely connected to my yellow wire. I will see if I can see where the black goes.
|
| 15th Jan 2011 7:00 pm |
|
|
