articworrior
Member Since: 20 Jul 2011
Location: south west
Posts: 11
|
Ordered and paid 24th. Recived 26th, fitted 26th, posted back 26th.
What a service, absolutly fantastic. Well worth the upgrade and well worth the price thanks and would recommened to all.
PS a very easy fit on my RRS. 
|
 26th Aug 2011 4:21 pm |
|
|
sjf1
Member Since: 08 Dec 2009
Location: london
Posts: 17
|
Hi wiggs,
Payment sent via your Bank...
thanks steve
|
| 27th Aug 2011 6:15 pm |
|
|
Aurrian
Member Since: 21 Jun 2011
Location: Glasgow
Posts: 5
|
Great service. After a year of not being able to use my phone in the car, i have it working within 10 mins of the postman delivering this!
For other with FFRR - you don't need the T50 torx bit wiggs supplies to fit in a disco, but you do need a T20 bit to get the bluetooth unit out of the car (from the passenger side access panel in the boot). It.s easy to access but difficult to get at the one T20 screw holding it in. You really want a right angle T20 tork key (like an allen key). You can get a set of torx keys on ebay for a few quid.
Thanks for making my phone work again!
I'll get the old unit in the post back to you tomorrow.
|
| 28th Aug 2011 10:51 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
 
|
You can use a flat blade screwdriver for the torx20  Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 28th Aug 2011 10:58 pm |
|
|
Aurrian
Member Since: 21 Jun 2011
Location: Glasgow
Posts: 5
|
In the range rover the BT module is mounted horizontally on top to the DVD sat nav unit just under the bodywork. Where it is mean you cannot get a screwdriver or a torx driver into the bolt. Its very awkward!
Trust me, you'll find it easier if you have a right angled torx driver.
|
| 29th Aug 2011 12:12 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
 
|
Being as this is a D3 forum , the instructions at the beginning are for a D3 . The website has a section for the Torx bit as it's needed to remove the panel .
For the FFRR site I have a completely different set if instructions and separate web page to log into  G4 Gone ...but not forgotten
|
| 29th Aug 2011 10:10 am |
|
|
Aurrian
Member Since: 21 Jun 2011
Location: Glasgow
Posts: 5
|
 I didn't realise there was a separate site with instructions for FFRR.
Just thought the advice about a right angled torx key might help someone.
Thanks again. Just off to the post office now to return the old module.
|
| 29th Aug 2011 11:20 am |
|
|
ds1570
Member Since: 31 Aug 2011
Location: Bath
Posts: 7
|
Wiggs, another order from a RRS owner just despatched and payment made by Bank Transfer using my username as a reference. Read all the posts and looks just what I need!
|
| 31st Aug 2011 12:40 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
i dont supply the torx bit for the RRS as a flat screwdriver can be used ...i have unticked the torx bit you ticked  G4 Gone ...but not forgotten
|
| 31st Aug 2011 3:06 pm |
|
|
ds1570
Member Since: 31 Aug 2011
Location: Bath
Posts: 7
|
Not a problem
|
| 31st Aug 2011 3:11 pm |
|
|
hedley
Member Since: 18 May 2011
Location: Dorchester
Posts: 4
|
Hi Wiggs
I have ordered a new D4 bluetooth module from Nick @ Yeovil Land Rover (I work 100 yards away! ) he said it was best to speak to you about a custom MOST cable you supply to integrate the module. I already have the mic and steering wheel buttons, just fed up with no signal strength, who's calling, directory and poor quality
I tried to PM but I have posted enough yet, Hope you can help
Cheers
Hedley
|
| 31st Aug 2011 4:16 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
i have pm'd you .
trying to keep this post for the exchange service ....d4 modules are in this post here http://www.disco3.co.uk/forum/topic53302.html
G4 Gone ...but not forgotten
|
| 31st Aug 2011 5:59 pm |
|
|
boatboy
Member Since: 25 Aug 2011
Location: melksham wiltshire
Posts: 6
|
All fitted, took longer to type in the code for the last time than to fit!
Thank you very muck Wiggs
Now in the post on its way back
|
| 2nd Sep 2011 1:25 pm |
|
|
ds1570
Member Since: 31 Aug 2011
Location: Bath
Posts: 7
|
My module has just arrived at the office. Will be going in this evening as 'she' wants it sorted!!
Thanks Wiggs, super service!
|
| 5th Sep 2011 9:56 am |
|
|
StevieJ4558
Member Since: 04 Aug 2011
Location: Edinburgh
Posts: 94
 
|
| 4x4 Info and bluetooth upgrade |
|
HI Mate I am new to disco 3, I have just bought a LR3 2006 SE and would like to sort out the bluetooth for my IPHONE pairing issues. Also I cannot get the 4x4 info displayed? sorry mate i am a bit of a outer biff
Can you help with my car, oh if so can you do it on site ie i travel to you?
|
| 5th Sep 2011 7:09 pm |
|
|
