EGR Blanking plates |
Yes |
83%
|
83% |
[5] |
No |
16%
|
16% |
[1] |
|
Total Votes: 6 |
|
|
Deondef
Member Since: 08 May 2007
Location: Randburg
Posts: 790
|
heine wrote:OK how about the 20 th from say 12 PM . We can do it at my place if everyone is OK with that and maybe have a braai after
Cool
S'pose engines have too cool down before work can commence Erstwhile - D3 S '07. Dual battery system. Upgraded tow hitch. Mantec skid plate. Frontrunner rr. Tmax double headed built in compressor
Defender TD5 110 CSW '00. "With everything"
|
11th Dec 2008 4:43 am |
|
|
heine
Member Since: 07 Feb 2007
Location: Midrand
Posts: 4054
|
Good point - so maybe we braai before . Just not too many beersch
|
11th Dec 2008 5:07 am |
|
|
Discoeast
Member Since: 19 Feb 2008
Location: Boksburg
Posts: 800
|
Guys a D3 does not cool down that quick, suggest be there a little
earlier, open bonnet, pull engine cover off and let it get some air.
I'll bring some tig welding gloves with, as they are thinner than the
ones you get with a recovery kit. Remember us shorty's need a box
to stand on to work
NB: each one should bring some rags to stuff around
the EGR to prevent the gaskets falling down into the depths
which results in the removal of the bottom engine protection plate.
and it is easier to work with a 1/4" drive
socket set on the EGR bolts with 300mm of extensions fitted D3 bullbar-spots-roof rack with spots-ladder-long range tank-swing out spare wheel carrier- upgraded tow bar-dash console-internal water tank-duel awnings-drawer system & T T.
|
11th Dec 2008 7:03 am |
|
|
IronMan
Member Since: 18 Jul 2006
Location: Midrand
Posts: 99
|
Why not do a breakfast then?
I have a skottel and we bring some eggs, beacon etc and we have a nice lekka breaky - you can always wash it down with some hops if you feel like it..
Mr D-east - you da man... Bring you a crate to stand on I'm TorqTuned
|
11th Dec 2008 7:31 am |
|
|
Baben
Member Since: 15 Feb 2006
Location: Kyalami
Posts: 2059
|
I'm in, thanks for offering the venue Heine. Will bring some tools, rags, gloves, and, seeing as I am not the tallest either, my own box to stand on
cost of entry? A packet of bacon and a (extra) case of beer?
|
11th Dec 2008 8:40 am |
|
|
Discoeast
Member Since: 19 Feb 2008
Location: Boksburg
Posts: 800
|
This is starting to sound like a box & dine
I'll bring my camping chair with D3 bullbar-spots-roof rack with spots-ladder-long range tank-swing out spare wheel carrier- upgraded tow bar-dash console-internal water tank-duel awnings-drawer system & T T.
|
11th Dec 2008 8:45 am |
|
|
Baben
Member Since: 15 Feb 2006
Location: Kyalami
Posts: 2059
|
There should be no boxing unless we drink too much before brekkie and trip over Tank
|
11th Dec 2008 8:49 am |
|
|
Deondef
Member Since: 08 May 2007
Location: Randburg
Posts: 790
|
This is getting better and better
Just to make sure the engines are really cold - I suggest a sleep-over preceded by short detour via Teazers to pick up some sleeping bags (pun intended). We can start work early in the morning Erstwhile - D3 S '07. Dual battery system. Upgraded tow hitch. Mantec skid plate. Frontrunner rr. Tmax double headed built in compressor
Defender TD5 110 CSW '00. "With everything"
|
11th Dec 2008 10:37 am |
|
|
heine
Member Since: 07 Feb 2007
Location: Midrand
Posts: 4054
|
Cool (pun intended) I am open all day starting at 7 AM
|
11th Dec 2008 10:59 am |
|
|
Baben
Member Since: 15 Feb 2006
Location: Kyalami
Posts: 2059
|
I'll go with the flow (is there a pun there?)
|
11th Dec 2008 1:00 pm |
|
|
IronMan
Member Since: 18 Jul 2006
Location: Midrand
Posts: 99
|
I'll just come... I'm TorqTuned
|
11th Dec 2008 2:14 pm |
|
|
gerhardt
Member Since: 13 May 2008
Location: Gauteng
Posts: 29
|
If there is still a set available, I am interested. Only concern is will fitting in any way nullify LR warrentee/garantee.
|
13th Dec 2008 8:02 am |
|
|
PSC
Member Since: 01 May 2006
Location: Johannesburg
Posts: 255
|
Bring a floor fan with to assist in cooling ?
|
13th Dec 2008 10:47 am |
|
|
Alfwarez
Member Since: 17 Jun 2006
Location: Gauteng
Posts: 63
|
What about new caskets.
|
13th Dec 2008 2:16 pm |
|
|
heine
Member Since: 07 Feb 2007
Location: Midrand
Posts: 4054
|
gerhardt wrote:If there is still a set available, I am interested. Only concern is will fitting in any way nullify LR warrentee/garantee.
There will be warranty issues - assuming they have to open the engine for some reason - but otherwise they should be undetectable
|
16th Dec 2008 12:15 pm |
|
|