Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Tpms ccf settings retrofit guide
Does anyone know what the settings should be as I set it to on
But then there is 30 odd different settings in type and tried a few but the light comes on then goes off after a few seconds got nothing in the service menu nothing on iid live data says offDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
Last edited by James1974 on 15th Sep 2018 8:22 am. Edited 1 time in total
13th Sep 2018 5:30 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Sorted it all working now and works great drove down the road and got warning reAr left pressure checked and only 33 in it rest were 38 inflated to 38 and after 1 mike warning went off
Another retrofit done 🙃Disco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
14th Sep 2018 8:01 pm
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
could you post your settings?Discovery 5 tdv6 HSE Corris Gray Outback Engineering Limited Edition IID Pro MV License
14th Sep 2018 8:59 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Start to finish
I brought wheels with the valves already in them
Fitted 4 new wheel receivers part number rre000010
You need 8 plasic rivots to hold them in position part number lr005541 inside wheel arches (not inside where wheels are)
Fronts —-take headlights out and you will see 2 rivot holes
Mine is a 2010 xs and wiring is already there behind both headlights
Passenger rear was there up under wheel arch rear or the rear wheels
Drivers rear was inside the car rapped up where the jack goes
Inside sensor pull down front interior light it’s only clipped in and the is a 3 pin plug rapped up that’s for the wireless receiver part number CH22-15K602-AB and that’s it for the hardware
Now software was hard as so many options
Iid tool in body control ccf tested settings
Tyre pressure monitoring 1 set to wbl_dsl_wl
tyre pressure monitoring 2 set to fitted
Now you need to also go into untested ccf settings and set tpms push switch to active (it’s not actually for a switch but activated the heavy or light loads in dash menu
Now check tmps frequency in untested ccf settings and make sure it’s on 433mhz as mine was on 315
You need to drive for at least 15mins for the
System to pick up the pressures and valve serial numbers of anything wrong it will display fault but if all working it will stay off unless like me on my first time it was working came up with rear left low pressure and was lower than the rear by 7 psi so worked very wellDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
14th Sep 2018 10:44 pm
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
Great report
Thank you mateDiscovery 5 tdv6 HSE Corris Gray Outback Engineering Limited Edition IID Pro MV License
14th Sep 2018 10:55 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
No probs mate hope it helps some one else outDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
15th Sep 2018 7:56 am
dgarside
Member Since: 17 Jan 2010
Location: Holmfirth
Posts: 734
Hi James, but of a thread resurrection, but any idea on the TPMS part number for the wheel module/sender?
This is looking like another good upgrade from the James1974 stable 😜RLD CB Bracket
RLD Spare Wheel Protector
RLD Sump Protector
ProSpeed Compressor Cover
TPMS Retrofit
Range Rover Digital Dash Upgrade
Tesla Style Android Screen Upgrade
25th Nov 2018 10:09 am
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
RRE000010
Got mine from john cradockDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
25th Nov 2018 10:18 am
dgarside
Member Since: 17 Jan 2010
Location: Holmfirth
Posts: 734
🤣 nope the tpms valves not the plastic rivets.RLD CB Bracket
RLD Spare Wheel Protector
RLD Sump Protector
ProSpeed Compressor Cover
TPMS Retrofit
Range Rover Digital Dash Upgrade
Tesla Style Android Screen Upgrade
25th Nov 2018 10:21 am
dgarside
Member Since: 17 Jan 2010
Location: Holmfirth
Posts: 734
Sorry me causing confusion 😏RLD CB Bracket
RLD Spare Wheel Protector
RLD Sump Protector
ProSpeed Compressor Cover
TPMS Retrofit
Range Rover Digital Dash Upgrade
Tesla Style Android Screen Upgrade
25th Nov 2018 10:22 am
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
dgarside wrote:
🤣 nope the tpms valves not the plastic rivets.
Oh sorry no idea my wheels had them in them when I brought them
And that part number is for the censor in the wheel arches not a rivotDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
25th Nov 2018 10:30 am
dgarside
Member Since: 17 Jan 2010
Location: Holmfirth
Posts: 734
All parts bought 😜RLD CB Bracket
RLD Spare Wheel Protector
RLD Sump Protector
ProSpeed Compressor Cover
TPMS Retrofit
Range Rover Digital Dash Upgrade
Tesla Style Android Screen Upgrade
25th Nov 2018 10:50 am
dgarside
Member Since: 17 Jan 2010
Location: Holmfirth
Posts: 734
All finally fitted and working. Was a real pain finding drivers side cable, and took removal of all interior trim on drivers rear to find it. Passenger side was clipped directly behind where initiator needs to be, similar with both front ones.RLD CB Bracket
RLD Spare Wheel Protector
RLD Sump Protector
ProSpeed Compressor Cover
TPMS Retrofit
Range Rover Digital Dash Upgrade
Tesla Style Android Screen Upgrade
28th Dec 2018 3:03 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Same as
Mine mate fronts behind headlights has to remove and rear drivers in where modules areDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
28th Dec 2018 3:51 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8221
Did you ever find the part numbers for the tyre valve sensors?It can when others can't,
It will when others won't,
It goes where others don't.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
