Member Since: 11 Oct 2012
Location: Rochdale
Posts: 1180
Hmm - I dont think its working, I have no dash errors shown but with I looked at faults with the IID I have this fault logged.
I decided to clear out the changes to the CCF and re apply them, so this is what I have set it to - Can anyone see anything I have set wrong?
2010 Disco 4 HSE
- Digital Dash Club
- GAP BT IID
24th Jun 2019 7:40 am
dgarside
Member Since: 17 Jan 2010
Location: Holmfirth
Posts: 734
From memory that looks good, although I’d need to double check my CCF.
Let me know if you want a loan/hire 😉 of the TPMS programmer I bought. See PM.RLD CB Bracket
RLD Spare Wheel Protector
RLD Sump Protector
ProSpeed Compressor Cover
TPMS Retrofit
Range Rover Digital Dash Upgrade
Tesla Style Android Screen Upgrade
24th Jun 2019 11:58 am
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
Oddly my TPMS haven’t worked since I installed the receivers (sensors not installed). TPMS not available.
This morning I was following a new Ford Edge down a straight road at 50mph and I picked up his TPMS and I had the message TPMS available: Light Load.
Felt very odd stealing his signal lol.
25th Jun 2019 3:28 pm
Beretta
Member Since: 11 Oct 2012
Location: Rochdale
Posts: 1180
Thanks to Darren and his box of tricks it’s now all working!
Even flagged up a low pressure.
2010 Disco 4 HSE
- Digital Dash Club
- GAP BT IID
3rd Jul 2019 12:11 pm
SweNic
Member Since: 05 Sep 2017
Location: Stockholm
Posts: 20
I am looking to retrofit the TPMS system in my car, but found no connectors in the roof light console at the windscreen nor did I find the connectors at the wheel house.
I still cannot find the two connectors in the front from behind the headlamps, I've got the two rears and the connector behind the interior light.
Can anyone take some pictures of the connector locations in the front and post them on here please? I've had the headlamps out endless times and can't see anything.1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder!
25th May 2020 8:03 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
My front were in the loom behind the front bumper but my cars a RRS. I haven’t got mine working still after 12 months. Had the sensors activated and inputted the serials manually on SDD but still not playing ball. I actually thought it was working last week when it popped up with TPMS active, set to light load. As soon as I thought, yay it’s working, it went inactive. Doh!!!012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
Couldn't see it when I got this far into it. Admittedly I wasn't looking for them then, but certainly didn't see any random connectors.
I've got the rears located so think it unlikely that the fronts wouldn't be fitted on the same harness.
1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder!
25th May 2020 9:20 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
Hopefully this may help. Drivers side (RH) sensor splits from the loom where my finger is behind headlamp. Mine was taped down behind the bumper but I suppose the guy who taped it back could put it wherever. The passenger side is likely in a similar orientation to driver side. I fitted the fronts without removing the bumper and just did it from under the car.
012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
26th May 2020 8:33 am
MikeBob
Member Since: 19 Sep 2016
Location: Pretoria
Posts: 115
I have sucessfully retrofitted TPMS in my D4. Works fine. pics of front plugs attached. There are 2 places to change in the CCF.
I didnt have to program sensor IDs, I bought the cheap sensors off ebay, activated them with an Autel tool and the vehicle picked them up easily
26th May 2020 9:52 am
Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2089
I have factory fitted TPMS but have left my sensors on my other wheels and purchased a new set of sensors for my current wheels but not yet got them working. Will the brand new LR sensors I have fitted in the wheels need some sort of activation or will my existing system just pick up the signal after a few miles?D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
26th May 2020 10:45 am
MikeBob
Member Since: 19 Sep 2016
Location: Pretoria
Posts: 115
the system will pick them up within a few miles of driving
26th May 2020 10:54 am
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
Are they from LR or do they just have LR details on them? Mine were cheap Original LR marked sensors but needed activating with the Autel tool (which I hired from a forum member) but it still won’t work. I used SDD to programme the serials into the BCM but still nothing other than a fault message. The CCF must be correct as the other options don’t work. My last thought is that the receiver behind the centre console lamp isn’t working.012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
26th May 2020 10:56 am
Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2089
MikeBob wrote:
the system will pick them up within a few miles of driving
Hasnt done as of yet and my old sensors were working fine hence why I was wondering if they require activating. Will probably have to play with the ccf settings I suppose but there’s alot to choose from on the TPMS list and my old settings clearly dont work D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
Last edited by Ceekay on 26th May 2020 11:01 am. Edited 1 time in total
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
