Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
Can you take a better photo of the 3rd one down and get a bit more of the loom to the left. They will be there somewhere unless someone’s messed with the loom.012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
All that is to the left is the connection for the headlamp and to the front bumper harness.
I'll get some more pictures tomorrow.
I'm chilling now having just changed the brake fluid on my RR Classic. ABS has it's benefits as brake bleeding can be easier and you only need one nipple per caliper, my fronts have got three per caliper.1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder!
Have a look at the pictures below. I cannot see any additional parked connector and also can't see the relevant wiring in the harness bundle.
1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder!
30th May 2020 3:32 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
I think a previous owner has messed with your wiring. All those wires should be taped up. I wonder if someone’s robbed the wiring and connectors for another use.
What colour wires go in to that heat shrinked piece?012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
I took the covering off the harness looking for the TPMS wires and couldn't find them. The wires inside the heatshrink are all grounds, it's a common practice amongst manufacturers to splice them all together with a crimp and then put adhesive heatshrink over them to seal out the moisture.
I'm the second owner of the car, the first was a lady from Leicester who never even took the cargo net out of the packet.
No one has robbed any connectors, the additional cables are there for the grill strobes and the winch on/off solenoid.
Guess I'm going to have to find some connectors.1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder!
31st May 2020 12:23 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
That really is odd, it’s the first car I’ve heard of that doesn’t have the connectors. To have the rears and the receiver connectors but not the front is just plain odd!012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
You're telling me. My next step is to remove the BCM and check the one connector on the back that has the wires going in to it for the front sensors, if they're there, it's a question of where the hell in the harness is the other end. If they're not there, then I know I can get wires to go in there and will make an over lay harness, similar to the one I've made for the eDiff upgrade I'm working on.1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder!
31st May 2020 1:26 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
Have you checked for the colour coded wires in the harness? I took my connector off the sensor and laid it along the harness in the direction of travel and it goes quite a way. It goes all the way to where it splits in this photo. I should have taken a photo with it laid over the top but it was an after thought.
012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
31st May 2020 9:23 pm
saulius.grigas
Member Since: 31 Aug 2017
Location: kaunas
Posts: 7
TPMS need help
Hello,
I would like to retrofit TPMS but I can't find rear right connector for wheel receiver.
1st Jun 2020 2:50 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
Rear right is usually in the boot behind the trim. Taped to the loom and it may have a thin layer of foam around it. Likely under the Amp (right box in this photo).
012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
Still on the hunt for the front ones!1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder!
1st Jun 2020 7:27 pm
saulius.grigas
Member Since: 31 Aug 2017
Location: kaunas
Posts: 7
Ok, thanks
2nd Jun 2020 8:58 am
saulius.grigas
Member Since: 31 Aug 2017
Location: kaunas
Posts: 7
TPMS need help
Ok now I need now software options by IID tools settings
Tyre pressure monitoring 1 set to ?
tyre pressure monitoring 2 set to ?
My car 2013 DA654145
Taken from a post on the first page of this thread.
Now software was hard as so many options
Iid tool in body control ccf tested settings
Tyre pressure monitoring 1 set to wbl_dsl_wl
tyre pressure monitoring 2 set to fitted
Now you need to also go into untested ccf settings and set tpms push switch to active (it’s not actually for a switch but activated the heavy or light loads in dash menu
Now check tmps frequency in untested ccf settings and make sure it’s on 433mhz as mine was on 315
You need to drive for at least 15mins for the
System to pick up the pressures and valve serial numbers of anything wrong it will display fault but if all working it will stay off unless like me on my first time it was working came up with rear left low pressure and was lower than the rear by 7 psi so worked very well1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder!
3rd Jun 2020 5:04 pm
saulius.grigas
Member Since: 31 Aug 2017
Location: kaunas
Posts: 7
TPMS need help
Hello
I did the CCF settings, no errors and now I can choose light or heavy check, but I cant to see real tires pressure.
Thanks
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
