W1LD R
Member Since: 02 May 2014
Location: manchester
Posts: 150
  
|
Wildrover wrote:Guys I have had this mod done for quite a while now but only getting around to asking does any one else have intermittent Bluetooth phone connection?
Mine does not connect immediately but takes a couple minutes even then it can still get confused but will usually stay online, once connected all works.
Any ideas?
you need to update your bluetooth module...
|
 4th Aug 2016 7:45 am |
|
|
Mez
Member Since: 11 Feb 2016
Location: Italy Milano
Posts: 91
|
Hi guys, finally i installed d4 sat nav on my d3, so i connect 3 pins d4 sat nav to head unit ( +v ; infotainment; ground ) , i connect most cable Y, and when the key is not insert LAND ROVER LOGO appears, when i insert key and position is on, the radio start and immediatly the Sat Nav turn off. For 1/2 minutes the head unit works good, then mute.
If i get out connector power of head unit, and replace it, then make the same. for 2 minutes works the head unit and then mute.
Big Cry Big Cry Big Cry
help me please... Discovery 3 2.7 TD HSE
... i love INDY ...
Last edited by Mez on 9th Sep 2016 12:07 pm. Edited 2 times in total
|
| 29th Aug 2016 12:49 pm |
|
|
Mez
Member Since: 11 Feb 2016
Location: Italy Milano
Posts: 91
|
... Discovery 3 2.7 TD HSE
... i love INDY ...
Last edited by Mez on 9th Sep 2016 12:08 pm. Edited 1 time in total
|
| 31st Aug 2016 12:25 pm |
|
|
Mez
Member Since: 11 Feb 2016
Location: Italy Milano
Posts: 91
|
.... Discovery 3 2.7 TD HSE
... i love INDY ...
|
| 8th Sep 2016 12:31 pm |
|
|
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
|
Hi thought i would post in here as all the Guru's have posted here.I have the D4 screen installed but cant get camera to come on i have edited the ccf to tell it it has a my10 rear view camera but the screen is blank so would that mean that the 2 previous camera's i have installed are the wrong one's or do i need to contact gap about the patck when i put it in reverse the screen comes up with beware when reversing
Cheers  Discovery 3 se gone
Range rover sport supercharged here:)
|
| 17th Sep 2016 12:22 pm |
|
|
Nubber99
Member Since: 13 Apr 2014
Location: Poole
Posts: 289
|
If you get the warning on the screen when you select reverse, then the screen is working as it should. It's the camera that is the problem. I should check it has power and that the video connections are OK.
|
| 17th Sep 2016 3:46 pm |
|
|
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
|
I do get the warning on screen and my camera was working before sooty should the camera be a pal or ntsc I seem to remember you saying a ntsc camera Discovery 3 se gone
Range rover sport supercharged here:)
|
| 17th Sep 2016 4:34 pm |
|
|
Nubber99
Member Since: 13 Apr 2014
Location: Poole
Posts: 289
|
Try using the secret menu and check the input. You can switch between PAL and NTSC there. However I think if you had the wrong signal, you would just get a distorted picture. My money is in either no power or no video input.
|
| 17th Sep 2016 4:47 pm |
|
|
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
|
Thanks is the secret menu the same as the D3 screen or different on D4 Discovery 3 se gone
Range rover sport supercharged here:)
|
| 17th Sep 2016 4:49 pm |
|
|
|
|
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
|
Yep same as D3 Discovery 3 se gone
Range rover sport supercharged here:)
|
| 17th Sep 2016 4:56 pm |
|
|
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
|
Thanks nubber99 sorted it the wire's i soldered were just about touching through the heat shrink donation made to site thanks for help
Geoff Discovery 3 se gone
Range rover sport supercharged here:)
|
| 19th Sep 2016 11:16 am |
|
|
Nubber99
Member Since: 13 Apr 2014
Location: Poole
Posts: 289
|
That's good news. You can reverse in confidence now.
Andy
|
| 19th Sep 2016 11:21 am |
|
|
martyn@seatcupra.net
Member Since: 24 Nov 2012
Location: Poole
Posts: 112
|
I've just fitted a MY10 D4 sat screen to my wifes Discovery 3, however the screen doesn't switch to the reverse camera when sticking the car in reverse.
I've checked that the option for the reverse camera is enabled but according to the secret mode on the screen it's configuration reports that it's not enabled.
Do I need special firmware from GAP to re-code this with my IID tool?
Cheers,
Martyn Current - 05 D3 HSE TDV6
Ex 55 FFRR 4.2 Supercharged
Ex 55 D3 HSE TDV6
|
| 15th Oct 2016 2:59 pm |
|
|
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
|
You need to update the xxo with a Iid tool or similar to tell it it has a rear camera if you have connected up the wires correctly but if you don't get a blank screen when reverse is engaged you have to have the ccf edited Discovery 3 se gone
Range rover sport supercharged here:)
|
| 15th Oct 2016 3:29 pm |
|
|
