Member Since: 24 Nov 2012
Location: Poole
Posts: 112
I have an IID tool, which module do I need to recode / update? I already have rear view camera enabled in the ACM CCF.
Also, does everyone elses vehicle arrow (the ^ shaped representation of the vehicle) flash/blink?
CheersCurrent - 05 D3 HSE TDV6 Ex 55 FFRR 4.2 Supercharged Ex 55 D3 HSE TDV6
15th Oct 2016 5:44 pm
Nubber99
Member Since: 13 Apr 2014
Location: Poole
Posts: 289
Have you set the "MY10 Screen Fitted" option in the IID tool?
15th Oct 2016 6:14 pm
martyn@seatcupra.net
Member Since: 24 Nov 2012
Location: Poole
Posts: 112
I can't seem to find that option Current - 05 D3 HSE TDV6 Ex 55 FFRR 4.2 Supercharged Ex 55 D3 HSE TDV6
15th Oct 2016 6:33 pm
Nubber99
Member Since: 13 Apr 2014
Location: Poole
Posts: 289
What version of firmware do you have in the IID tool? I have V3.00.00 B2439 - beta version.
I'm not sure if you need the beta version to get the option for the MY10 screen. If you don't have it after updating your IID tool, you might need to drop a line to Pat at GAP.
15th Oct 2016 6:43 pm
martyn@seatcupra.net
Member Since: 24 Nov 2012
Location: Poole
Posts: 112
I'm on 3.00.00 B2134. I'll drop Pat a line and see what he thinks!
Thanks for your help so far Current - 05 D3 HSE TDV6 Ex 55 FFRR 4.2 Supercharged Ex 55 D3 HSE TDV6
15th Oct 2016 6:53 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
I also had to cut out some off the rear plastic pick up point in the center as mine would not sit back far enough but did not have to trim ant of the H trim Discovery 3 se gone
Range rover sport supercharged here:)
24th Oct 2016 7:58 am
VMatas
Member Since: 26 Jan 2012
Location: Rybnik
Posts: 152
Please confirm, BH22-10E887-BD unit is suitable too or only AH22-xxxxx?
BTW, if anyone is interested, looks like i found here +1 unit more(in 3-4 days i will know exactly model). Please let me know if any by PM.
24th Oct 2016 6:52 pm
VMatas
Member Since: 26 Jan 2012
Location: Rybnik
Posts: 152
Nobody knows?
25th Oct 2016 10:42 am
martyn@seatcupra.net
Member Since: 24 Nov 2012
Location: Poole
Posts: 112
I put a 'BH22-10E887-BD' unit in mine with no issue.Current - 05 D3 HSE TDV6 Ex 55 FFRR 4.2 Supercharged Ex 55 D3 HSE TDV6
25th Oct 2016 10:44 am
VMatas
Member Since: 26 Jan 2012
Location: Rybnik
Posts: 152
Many thanks ):
25th Oct 2016 12:26 pm
Nubber99
Member Since: 13 Apr 2014
Location: Poole
Posts: 289
I have noticed the odd reference to the timed heating function in a 2010 D4. So can you enable this if you have a 2010 D4 sat nav in a D3 ...... just askin' .....
5th Nov 2016 2:09 pm
Smarty167
Member Since: 15 Feb 2016
Location: Aberdeen
Posts: 6
Does anyone know what the plug number is that's required to allow power to be put into the D4 sat nav?
10th Nov 2016 6:14 pm
nickprice
Member Since: 28 Feb 2011
Location: Den Haag
Posts: 317
Finlally got round to fitting the screen I bought off beanie. Fairly straightforward as beanie had already taken care of some of the modifications neeeded. Some things I've noticed (having only given it a short drive to work):
1. It did not recognise the GPS signal. I then went into compass view and it all started working. Not sure if this is a coincidence or if that made any difference?
2. I couldn't figure out how to pull the cable out the back of the sat nav under the seat! My view was restricted and I didn't want to damage anything. I ended up unwrapping the loom just before it and piggy-backing onto the ABS sensor wire. Actually a lot neater and easier.
3. At the minute my position cursor is flashing. The GPS is tracking me fine though. It's quite annoying. Hope this is only temporary. [Edit: found out this is what it is meant to do, so guess I'll just have to get used to it.]
4. When I enabled the reverse camera in the IIDTool (MY10 screeen fitted option), it completely killed the screen. I went back in and disabled it and everything was fine again. Need to play around with this when I have more time.
5. Still need to try adding TMC as I bought the wrong splitter.
Really happy with the result though.
D3 SE with Hankook MT 275/65/R18, IID BT Tool, ProSpeed rock/tree sliders + compressor guard, RLD sump guard & winch tray + 13,000lb hidden winch, Gearbox guard, Frontrunner 80l aux tank with fuel gauge, V8 brake upgrade, Traxide USI-160 dual battery system, Frontrunner ladder, custom boot storage, Lazer LED driving lights, de-cat exhaust, Aftermarket Oro TPMS, i7 Mac Mini touch screen install (running Windows 10) mirrored on rear screens.
Last edited by nickprice on 18th Nov 2016 12:24 pm. Edited 1 time in total
18th Nov 2016 10:27 am
pigeon
Member Since: 10 Sep 2011
Location: gloucester
Posts: 685
fitted
anyone fitting these , for beer tokens
18th Nov 2016 11:38 am
Mez
Member Since: 11 Feb 2016
Location: Italy Milano
Posts: 91
i've installed d4 sat nav on my d3. my d3 hse not have sat nav initially.
i connect all 3 wires excluding speed wire, and i have this problems:
- the sat nav not save the settings and not save the clock. every time that i turn off my car, the sat nav lose the settings
- when i activate a navigator, the voice "turn left, turn right, ecc... not works" the sat nav tell me only, See the map, you are arrived.
you can help me ?
thanksDiscovery 3 2.7 TD HSE
... i love INDY ...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
