Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294
Right I'll try and explain this
D3 has no TMC on its touch screen as feed via Most circuit
D3 has a specific TMC module and a diversity aerial
D3 need aerial on the adio media unit to work direct
The D4
Has TMC on the touchScreen
The D4 media radio get it radio via the Most circuit unlike the D3,
Obviously the reason we need a splitter to allow the D4 touch screen to get the TMC as it is not looking to get this via the Most circuit and the D3 media radio needs its normal input via the aerial connection, as it does get it via the Most circuit either.
The units are not programmed to look for the information this way.
I think we're on the same page Robbo, Nubbs and I are thinking that if you connect the antenna to the D4 screen despite not having a TMC module TMC will work as its in the screen.Altox GSM FBH controller thread
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
2nd Feb 2015 9:22 pm
robbo770
Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294
Now as flack screen had the cameras available if seen by the touch screen there must be a way to get this controlled and allow the surround system to be also used on the D3.
I do need the wire connections for this unit CAN ANYONE HELP PLEASE!!! And the colour code for the cameras please!!FFRR SC 4.2
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Think your going to struggle with the camera module as it needs connecting into the canbus .. And the d3 has a different speedG4 Gone ...but not forgotten
2nd Feb 2015 9:56 pm
robbo770
Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294
Going to try tying it directly to the touchscreen canbus connections only
Got any info on the green 4 pin connections, two must be positive and earth
Brown is the video signal to the touch screen, think it probably used the cam wires input, as venture cam got dropped from the options around this age groupFFRR SC 4.2
Actually, it wasn't one of these. The male end is a double connector, rather than two singles.
Any chance of letting us know where we can get hold of one of the leads you have
5th Feb 2015 1:00 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
To address the brightness issue, I've got some lighting rig gel sheets (plastic coloured sheets) and will be testing three different levels of dimming (it's actually photo light Dimming gel sheets).
Size of the scrren area seems to be 95mm x 159mm (probably 160mm, but that's what I measured anyway)
It could be slightly larger as I think it will sit under the plastic bezel to keep it in place.
It shouldn't make any difference to the touch screen as it's not very thick (0.6).
Will take some pics tonight with it on.
It doesn't help the auto adjust of the brightness with the light levels, but at least it means you're not blinded at night!Bodsys Brake Bible
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
