Member Since: 24 Dec 2010
Location: Borders
Posts: 11027
4 wheel alignment done today...
Before...
After....
I had a very slight pull to the left which is now gone....."Better to remain silent and be thought a fool,than to speak out and remove all doubt" ?.....what rubbish...
Locking rear E-diff
RLD spare wheel protector & sump guard
Extended roof rails
Series 111 mudflaps
Black side tubes,grill and vents
Timed climate remote
Hids4u interior lights
D4 Firenze my2012 HSE
D3 Java 2005 SE manual (sold,sadly,thanks for the memories)
1966 '88 Series 2a....still starts in the morning better than I do...
22nd Apr 2014 12:01 pm
Iguana
Member Since: 14 Oct 2013
Location: 'Sunny' Zomerset
Posts: 9424
Great work
What did you pay out of interest?Iggy/Ieuan
Current LR =
2015 RR Sport Autobiography
&
1992 Land Rover Defender Camper
- Gone but not forgotten:
MY10 D4 GS
MY05 Disco 3 'S'
MY14 FL2 HSE manual in Blue
MY15 Disco 4 HSE Lux in Santorini Black
MY08 Disco 3 SE manual in Buck Blue
1960 Series 2 88" (No idea why I sold it!)
22nd Apr 2014 12:37 pm
euangibson
Member Since: 24 Dec 2010
Location: Borders
Posts: 11027
£66 ...took about an hour "Better to remain silent and be thought a fool,than to speak out and remove all doubt" ?.....what rubbish...
Locking rear E-diff
RLD spare wheel protector & sump guard
Extended roof rails
Series 111 mudflaps
Black side tubes,grill and vents
Timed climate remote
Hids4u interior lights
D4 Firenze my2012 HSE
D3 Java 2005 SE manual (sold,sadly,thanks for the memories)
1966 '88 Series 2a....still starts in the morning better than I do...
22nd Apr 2014 12:43 pm
discoLR3rm
Member Since: 24 Feb 2014
Location: Brussels
Posts: 13
static/manual front wheel alignment/measurement
I am replacing the lower front arms. Not replacing the upper arms and touching the stabilizer linkage.
I tried to mark the bushing fittings washers but I want to be able to adjust manually the front lower arms, before taking the car to the alignment workshop.
I have seen the machine readings in ° from the previous posts but I I would like to know
the measurement of the toe in millimeters, comparing the distances between the front and rear sections of the front rims.
Member Since: 02 Jul 2006
Location: Oberon, NSW
Posts: 6922
Dealer did mine for free under warranty as it was at low kms. “There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
22nd Apr 2014 2:28 pm
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
Where did you have it done Euan?Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
22nd Apr 2014 2:51 pm
euangibson
Member Since: 24 Dec 2010
Location: Borders
Posts: 11027
Checked on www.alignmycar.co.uk and discovered there was a guy just round the corner from me has the Hunter system http://www.scottbrowncars.com"Better to remain silent and be thought a fool,than to speak out and remove all doubt" ?.....what rubbish...
Locking rear E-diff
RLD spare wheel protector & sump guard
Extended roof rails
Series 111 mudflaps
Black side tubes,grill and vents
Timed climate remote
Hids4u interior lights
D4 Firenze my2012 HSE
D3 Java 2005 SE manual (sold,sadly,thanks for the memories)
1966 '88 Series 2a....still starts in the morning better than I do...
22nd Apr 2014 3:04 pm
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23828
Was it put into Tight Tolerance Mode ?
I've read numerous threads about realignment and it seems that this needs to be done or it goes back out again.2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired)
23rd Apr 2014 8:29 pm
euangibson
Member Since: 24 Dec 2010
Location: Borders
Posts: 11027
I asked what diagnostics he used and enquired about TT ....he uses Snap-on and Bosch diagnostic systems and confirmed he had understanding of TT ....I had no way of confirming whether it was done in TT mode as I had a meeting while it was being done.....might be interesting to nip back in a couple of months for a quick check "Better to remain silent and be thought a fool,than to speak out and remove all doubt" ?.....what rubbish...
Locking rear E-diff
RLD spare wheel protector & sump guard
Extended roof rails
Series 111 mudflaps
Black side tubes,grill and vents
Timed climate remote
Hids4u interior lights
D4 Firenze my2012 HSE
D3 Java 2005 SE manual (sold,sadly,thanks for the memories)
1966 '88 Series 2a....still starts in the morning better than I do...
23rd Apr 2014 8:41 pm
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23828
Without looking it up, I can't remember exactly what TT does.
My D3 was realigned twice, both by main dealers. One who had the kit to do it in house and the other one took it to a local place. Both times it was perfect, with tyres wearing evenly etc.
I'd like to know the definitive answer as to what exactly needs doing and what machinery should be used etc.
Prices seem to vary considerably as well.2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired)
23rd Apr 2014 9:08 pm
nighthawk
Member Since: 24 Jul 2010
Location: Malta
Posts: 1163
TT will instill Obsessive Compulsive Disorder into the EAS ECU. Basically it will cause it to make micro adjustments to maintain the correct height level at all corners. IIRC the tolerance in normal mode is around 9mm. Basically if the height at a particular corner is meant to be 465mm and it currently is 456mm, the EAS will pump up that corner till it gets to 465. If it currently is 457mm it won't do anything.
In TT mode, the tolerance is around 3mm. So the EAS will only "not do anything" between 462 and 468mm.
Basically, with the car in TT mode, you have a better chance of getting the alignment 100% perfect. Without TT mode, you might still be lucky, but you might not. If one corner is at 457mm and one is at 473mm, things will be slightly off....
In any case, without TT mode, you will still align the car, and it will most probably drive much better than before, but it might not be 100%... maybe 95% perfect.Dennis
2006 Discovery 3 TDV6 Commercial Manual Buckingham Blue
24th Apr 2014 7:03 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20841
Also why you should really calibrate the suspension before an alignment My D3 Build Thread
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
Just had mine done using the Hunter system as I was getting a lot of road noise on the motorway and tyre scrubbing on the inside of one of the rears, so took your advice and found the place off the align my car website local to me, he had to adjust front and rear tracking, was in there about 45 mins and was charged £120 plus vat 😳
But I suppose it's cheaper than 4 tyres !!
Cheers
SharksMY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
24th Apr 2014 1:14 pm
euangibson
Member Since: 24 Dec 2010
Location: Borders
Posts: 11027
That was basically my thoughts....it should help with even tyre wear,and hopefully they will last longer.....£120+VAT though ......it does prove an earlier point about how much prices vary "Better to remain silent and be thought a fool,than to speak out and remove all doubt" ?.....what rubbish...
Locking rear E-diff
RLD spare wheel protector & sump guard
Extended roof rails
Series 111 mudflaps
Black side tubes,grill and vents
Timed climate remote
Hids4u interior lights
D4 Firenze my2012 HSE
D3 Java 2005 SE manual (sold,sadly,thanks for the memories)
1966 '88 Series 2a....still starts in the morning better than I do...
24th Apr 2014 1:36 pm
SHARKYSHARKS
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
Euan ,
I was talking to the owner and he was saying it cost him nearly 40k to put the ramp and Hunter system in so you have got to say he needs to recoup his money from the investment !
You could have the basic check for £49 and after the results decide whether to have the geometry reset and dependant on what adjustments where required dictated what you paid, which to be truthfully is fair enough.
Just need another GG AT to replace the bald one off the rear MY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
......it does prove an earlier point about how much prices vary 
