Richie63
Member Since: 16 Oct 2012
Location: Kent
Posts: 494
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 SE Auto Zambezi Silver 2005 Discovery 3 TDV6 SE Auto Zambezi Silver](../images/veh/zambezi_silver.gif)
|
Hi Pete, so at the risk of sounding thick, are you saying I don,t need an inline fuse?
|
12th Nov 2013 9:52 am |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
![](templates/vbnew/images/spacer.gif)
![2010 Discovery 4 3.0 TDV6 SE Auto Santorini Black 2010 Discovery 4 3.0 TDV6 SE Auto Santorini Black](../images/veh/santorini_black.gif)
|
On the RHD car where the module in in the same box, EG battery box no its not needed, the wire is so short on a RHD car it cant get chafed or shorted so no fuse it needed.
Where as the LHD cars will extend the wire 5 feet to the other side of the car and it could then get chafed or shorted as the wire passes accross so does really need a fuse.
Pete
|
12th Nov 2013 9:55 am |
|
|
Richie63
Member Since: 16 Oct 2012
Location: Kent
Posts: 494
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 SE Auto Zambezi Silver 2005 Discovery 3 TDV6 SE Auto Zambezi Silver](../images/veh/zambezi_silver.gif)
|
Ok thanks for that.
|
12th Nov 2013 9:58 am |
|
|
Richie63
Member Since: 16 Oct 2012
Location: Kent
Posts: 494
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 SE Auto Zambezi Silver 2005 Discovery 3 TDV6 SE Auto Zambezi Silver](../images/veh/zambezi_silver.gif)
|
Fitted tonight and all up and running, just in time as well, frost forcast for tonight.
Thanks Pete.
|
12th Nov 2013 11:26 pm |
|
|
DN
D3 Decade
Member Since: 24 Jun 2006
Location: W.London.
Posts: 2326
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 Base 7 Seat Auto Zambezi Silver 2006 Discovery 3 TDV6 Base 7 Seat Auto Zambezi Silver](../images/veh/zambezi_silver.gif)
|
Fitted mine earlier today,(taking a leaf out of Robbie's book with convoluted tubing and tucking the redundant red wire away ), had red LED flashing initially, but a quick phone call to Pete sorted it, I must've not connected +ve connection cleanly, which causes this. Re did it without dithering and all Ok, fired into life straight away. So nice to get into a warm vehicle. Many Thanks for your help Pete, it's a fantastic bit of kit
|
12th Nov 2013 11:38 pm |
|
|
johno1973
Member Since: 15 Sep 2009
Location: leeds
Posts: 166
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 HSE Auto Zermatt Silver 2006 Discovery 3 TDV6 HSE Auto Zermatt Silver](../images/veh/zermatt_silver.gif)
|
Hi Pete
Is it possible to pre order or reserve one of these as I always seem to miss them when you have them in stock ??
All the best
Andy j
|
13th Nov 2013 8:06 am |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
![](templates/vbnew/images/spacer.gif)
![2010 Discovery 4 3.0 TDV6 SE Auto Santorini Black 2010 Discovery 4 3.0 TDV6 SE Auto Santorini Black](../images/veh/santorini_black.gif)
|
Your welcome DN, gladd ill is good.
johno1973, My site Ecommerce rules state I can not take payments for stock that is not ready for dispatch. We are waiting for DIP switches to arrive and should have them built very soon.
Ill post here once built to give you the heads up.
Pete
|
13th Nov 2013 9:32 am |
|
|
rockcrawler
Member Since: 31 Oct 2012
Location: Ferring
Posts: 2884
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 Metropolis LE Auto Bonatti Grey 2006 Discovery 3 TDV6 Metropolis LE Auto Bonatti Grey](../images/veh/bonatti_grey.gif)
|
Hi Pete as soon as you have the remote controllers in stock I will order one
Thanks Gary D3 Metropolis Bonatti Grey-Alpaca Leather-adaptive headlights-fridge-EGR blanking kit-Harmen Karden-Cruise-4x4 info enabled-Tinted Windows-Heated F&R Seats-Rosen rear Entertainment-LED'S everywhere -Smoked Side Repeaters-Rear Aircon-Vredestein Wintrac 4 Extreme-Puddle and Footwell Lamps-Stainless Steel Side Protection Tubes- NEW ASHTRAY ( thanks to dsd1036 )
Club BAS Remote FBH
Club MXS10 Ctek
Club Beanie Grill
Rear D4 Lamps
Geoff Gearbox Flush
BAS Remap
|
13th Nov 2013 10:20 am |
|
|
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
![](templates/vbnew/images/spacer.gif)
![2008 Discovery 3 TDV6 HSE Auto Stornoway Grey 2008 Discovery 3 TDV6 HSE Auto Stornoway Grey](../images/veh/stornoway_grey.gif)
|
Hi Pete. Fbh still going strong. When or will you be getting any of your kit 2 gsm in stock.
|
17th Nov 2013 11:10 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
![](templates/vbnew/images/spacer.gif)
![2010 Discovery 4 3.0 TDV6 SE Auto Santorini Black 2010 Discovery 4 3.0 TDV6 SE Auto Santorini Black](../images/veh/santorini_black.gif)
|
good news tayaste, I hope to post info on the gsm addon next week. Im a little manic at the moment at work and my back is giving me a little jip again now its got cold so things are slow ay my end.
Regards Pete
|
18th Nov 2013 12:06 am |
|
|
Windowlicker
Member Since: 12 Sep 2010
Location: East Yorkshire
Posts: 580
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 HSE Auto Stornoway Grey 2007 Discovery 3 TDV6 HSE Auto Stornoway Grey](../images/veh/stornoway_grey.gif)
|
Hi pete ,
I was going to give you a bell tommorrow to ask the very same , I bought a standard set up from you around a month ago ( not knowing you even did the gsm option ) and was wondering what availability of the units was.
Also what you would charge to supply and " add on " the gsm unit to my existing unit ?
Assuming you even offer that as an option?
Thanks.
Nick Procrastination is the thief of time!!
|
18th Nov 2013 12:22 am |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
![](templates/vbnew/images/spacer.gif)
![2010 Discovery 4 3.0 TDV6 SE Auto Santorini Black 2010 Discovery 4 3.0 TDV6 SE Auto Santorini Black](../images/veh/santorini_black.gif)
|
Hopefully next week ill add the kit to my site shop for mail order, its 5 wires to solder to the main plip kit pcb. I can fit and do the soldering at my place no problem and at extra cost to the gsm kit its self.
The only criteria is that your main kit needs to have a white antenna which indicates its already gsm compatable firmware inside. yours will be
Some of the older kits need firmware programming to match the gsm addon but this is no problem at my workshops.
Pete
|
18th Nov 2013 12:34 am |
|
|
eljot
Member Since: 15 Nov 2013
Location: wasserburg am inn
Posts: 90
![](templates/vbnew/images/spacer.gif)
![2008 Discovery 3 TDV6 HSE Auto Stornoway Grey 2008 Discovery 3 TDV6 HSE Auto Stornoway Grey](../images/veh/stornoway_grey.gif)
|
orderd my fbhic yesterday. what size of fuse do i need to install (LHD)? 5Amp?
thx, martin
|
21st Nov 2013 8:18 am |
|
|
|
eljot
Member Since: 15 Nov 2013
Location: wasserburg am inn
Posts: 90
![](templates/vbnew/images/spacer.gif)
![2008 Discovery 3 TDV6 HSE Auto Stornoway Grey 2008 Discovery 3 TDV6 HSE Auto Stornoway Grey](../images/veh/stornoway_grey.gif)
|
okay, thx!
but, is there a need to place the controller next to the fbh or next to the battery?
i do not know where GND is (next to battery or fbh), but if i mount the controller
next to the battery i just have to extend the signal cable to pin2?
|
21st Nov 2013 8:57 am |
|
|