IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
28th Feb 2013 6:57 pm
Ent
Member Since: 12 Oct 2007
Location: In the cack
Posts: 6488
Please make a TDV8 fit in it Club Exped trailer
Club Timed Climate
Club Flappy paddle steering wheel
Club 300bhp
Club Prospeed test pilot/lab rat
Club National Luna Stella conditioner
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
Well done mikey don't worry about the engine that's a minor detail and in the best colour
On a serious note I see Nick/TLO put you on to CWS if you need me to take a look or collect it just shout Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
28th Feb 2013 7:04 pm
haroosh
Member Since: 16 Nov 2010
Location: Perth & Kinross
Posts: 624
Re: Well, It's about frikkin' time!
Disco_Mikey wrote:
From now on, Disco_Mikey officially has himself a Disco 3!
Click image to enlarge
Car in question is an 05 HSE.
Does need an engine though
Nice one..... Great colour and a hse too....
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated
28th Feb 2013 7:37 pm
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6415
how fast they drove it to loose the engine?
28th Feb 2013 7:58 pm
Kingmav66
Member Since: 20 Jul 2010
Location: Gloucestershire
Posts: 1349
Well done Mikey
I'm sure Del will be able to answer any technical Q's you have
28th Feb 2013 8:07 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73125
Ask away!! No guarantees that the answers are anywhere near right but ask away.
Stating the obvious but they seem to go better with an engine!!
28th Feb 2013 8:09 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20853
bigdave wrote:
What else does it need?
What mods are you thinking if, after a power plant of course!
Needs 2 tyres, and a replacement engine. And by the time I have enough cash to buy an engine, it will need another MOT
On the plus side (for me at least) it has had around £3000 spent on it replacing wheel bearings, suspension bits and a new AMK compressor
Ent wrote:
Please make a TDV8 fit in it
I had considered that. However, there would be too much cost involved in doing so
grzesiul wrote:
how fast they drove it to loose the engine?
It was serviced elsewhere just a week before the engine let go. The garage in question used a spurious oil filter, which caused low oil pressure, resulting in a noisy bottom end
DSL wrote:
Ask away!! No guarantees that the answers are anywhere near right but ask away.
Del, I need to lift the body to replace the engine. Any pointers? My D3 Build Thread
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
and in the best colour 
