AWD man
Member Since: 03 Jul 2009
Location: In Drag
Posts: 831
|
They're only 5mm Al, surely the protrusion of the existing hub will be enough to accuratly locate the wheel? 57 RRS TDV8
BAS Map
D3: Gone but not forgotten
|
 11th Aug 2009 10:50 am |
|
|
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10353
|
possibly, just check when you put them on that there is enough lip still showing to get into the center part of the wheel, as the first part of the hub hole in the wheel is tappered (to help fitting the wheel), and it wont center if its only into this part.
Al Volvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
|
| 11th Aug 2009 11:10 am |
|
|
AWD man
Member Since: 03 Jul 2009
Location: In Drag
Posts: 831
|
Will do... god at this rate I'll be putting 18's back on it! 57 RRS TDV8
BAS Map
D3: Gone but not forgotten
|
| 11th Aug 2009 11:14 am |
|
|
SJR
Member Since: 09 Aug 2006
Location: East Manchester
Posts: 4030
 
|
or finding out what is wrong with your car to prevent your 20"s fitting (without rubbing), seeing as others have managed to get them to fit without problems  I believe that every human has a finite number of heart-beats. I don't intend to waste any of mine running around doing exercises.
Buzz Aldrin (1930 -
|
| 11th Aug 2009 11:30 am |
|
|
AWD man
Member Since: 03 Jul 2009
Location: In Drag
Posts: 831
|
Fair point SJR,
It's just I cannot see a 37k mile D3, that's never been seriously off roaded, will have worn suspension.
I've got all receipts from new, only 2 owners (last owner used it as a weekend car only and did 18k in 2 years).
I'll get the garage to have a close look at it tomorrow. 57 RRS TDV8
BAS Map
D3: Gone but not forgotten
|
| 11th Aug 2009 11:37 am |
|
|
SJR
Member Since: 09 Aug 2006
Location: East Manchester
Posts: 4030
|
Hey its a Land Rover, people have had diffs fail at <10k miles on D3's so by 37k miles anything is possible unfortunately 
And thanks for reading my previous post as it was intended and not being offended by it I believe that every human has a finite number of heart-beats. I don't intend to waste any of mine running around doing exercises.
Buzz Aldrin (1930 -
|
| 11th Aug 2009 11:41 am |
|
|
AWD man
Member Since: 03 Jul 2009
Location: In Drag
Posts: 831
|
Ha no offence taken here
I come from Scoobynet.... u need thick skin just to post anything on there so here is quite polite and gentlemanly in comparison
 57 RRS TDV8
BAS Map
D3: Gone but not forgotten
|
| 11th Aug 2009 11:49 am |
|
|
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10353
|
if there's nothing worn, then wheel offset or rim width must be different. Are you sure they are 53mm (or lower, as this puts the wheel further out), and 9.5" wide (not 10"), as I've seen copies ranging from 8.5" to 10.5", with offsets from 35 to 53mm.
Genuine LR ones have the landrover logo cast into the back (even though they are cast/made by someone else.)
Al Volvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
|
| 11th Aug 2009 11:53 am |
|
|
AWD man
Member Since: 03 Jul 2009
Location: In Drag
Posts: 831
|
Al
I've not found the LR stamp (as yet) but I have found a serial number (in right place) which tally's with LR's 57 RRS TDV8
BAS Map
D3: Gone but not forgotten
|
| 11th Aug 2009 12:04 pm |
|
|
AWD man
Member Since: 03 Jul 2009
Location: In Drag
Posts: 831
|
Well they're on!
Used 3mm spacers (from Halfords) in the end,
The 5mm and 9.5mm 120 PCD dimensions didn't allow for an M14 bolt..and thus didn't fit  so drove to my local halfords with a tape and bolt and voila..sorted
Without the spacers the nuts did 9 turns, with the spacers 8.5, and the reccommended minimum was quoted as 6
Got the guys to check the suspension and all seams fine
I've got a slight rub on the bottom lip of the inner wing at full lock but nothing a hacksaw cannot "adjust" 57 RRS TDV8
BAS Map
D3: Gone but not forgotten
|
| 12th Aug 2009 11:57 am |
|
|
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15264
  
|
TFFT
Glad all seems sorted.
no wheel vibrations then ? ...... always on the road less travelled 🚧
|
| 12th Aug 2009 12:30 pm |
|
|
AWD man
Member Since: 03 Jul 2009
Location: In Drag
Posts: 831
|
No vibrations Ron,
The guys said the older generation of spacers were not very good, but these were very well engineered and located snugly for a positive fit. 57 RRS TDV8
BAS Map
D3: Gone but not forgotten
|
| 12th Aug 2009 12:37 pm |
|
|
Ken
Member Since: 20 Feb 2006
Location: Here
Posts: 10865
|
is there a part number chap?
|
| 12th Aug 2009 2:50 pm |
|
|
AWD man
Member Since: 03 Jul 2009
Location: In Drag
Posts: 831
|
They were (dare I say it) RIPSPEED 3mm universal spacers, 4 or 5 nut fitting 57 RRS TDV8
BAS Map
D3: Gone but not forgotten
|
| 12th Aug 2009 3:08 pm |
|
|
Ken
Member Since: 20 Feb 2006
Location: Here
Posts: 10865
|
If they work and they are not steel
|
| 12th Aug 2009 4:36 pm |
|
|
