Patman
Member Since: 16 Aug 2019
Location: Cornwall
Posts: 314
|
Hi all
I am thinking of upgrading all my exterior lights to LED's
i'm struggling to find ones for dipped and main beam as they seem to bo same is there any difference in wattage as both are h1's i believe?
also is it worth doing it mind you ive found LED bulbs cheaper than standard filaments any advice happily taken Patman
Derek the Discovery keeper and owner
|
30th Jul 2021 9:40 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10485
|
No don't.
THey could/should fail at the MOT.
They fail and flash.
Worth change the interior lights to led though
I was expecting them to be H7
|
30th Jul 2021 10:47 pm |
|
|
Patman
Member Since: 16 Aug 2019
Location: Cornwall
Posts: 314
|
thats quite an eye opener never heard that they have issues Patman
Derek the Discovery keeper and owner
|
30th Jul 2021 10:49 pm |
|
|
kajtzu
Member Since: 11 Aug 2017
Location: Helsinki
Posts: 6632
|
Long beam (dipped beam) is H7 for sure.
And what Pete said about not being road-legal.
|
30th Jul 2021 10:50 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10485
|
Halogen better for main beam.
|
30th Jul 2021 11:17 pm |
|
|
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2462
|
Xenon lights are better by far, just pick yourself up some second hand xenon lights. Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
|
31st Jul 2021 8:09 am |
|
|
Patman
Member Since: 16 Aug 2019
Location: Cornwall
Posts: 314
|
xenon are on the d4 are the backwards compatable? Patman
Derek the Discovery keeper and owner
|
1st Aug 2021 1:10 am |
|
|
kajtzu
Member Since: 11 Aug 2017
Location: Helsinki
Posts: 6632
|
Yes to compatible but I think you need a different grille, bumper and sides…
|
1st Aug 2021 1:36 am |
|
|
RichardK
Member Since: 18 Jan 2006
Location: Western Australia
Posts: 295
|
Some years ago I bought Xenon headlight assemblies for my D3, just a straight swap and reconfigure the CCF. Have worked faultlessly for around 10 years.
Cheers
RichardK 2009 Discovery S 3, BAS tune, EGR Delete, ARB winch bar, Milemarker hyd winch, HF and UHF radios, Rear spare wheel carrier, Roof rack,
Touring: Australian Offroad Matrix IV Camper
|
1st Aug 2021 2:05 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10485
|
D3 lights are better.
So if they are cheaper......
|
1st Aug 2021 6:22 am |
|
|
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2462
|
The D3 xenons are by far the best lights, i also have a D4 with Xenons and the output is very poor compared to the D3 when put side by side. Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
|
1st Aug 2021 8:02 am |
|
|
Flapper
Member Since: 04 Feb 2015
Location: Gloucester
Posts: 341
|
If your changing the 501 bulbs make sure you buy 24v as they can take the 15.4 volts charging.
I have changed mind 5 years ago and none have started to flash.
If you use 12v they go faulty then flash.
|
1st Aug 2021 9:08 am |
|
|
Patman
Member Since: 16 Aug 2019
Location: Cornwall
Posts: 314
|
RichardK wrote:Some years ago I bought Xenon headlight assemblies for my D3, just a straight swap and reconfigure the CCF. Have worked faultlessly for around 10 years.
Cheers
RichardK
Have sourced some lamps off the worlds best auction site (honest)
What is a ccf reconfig and how do i do it i have an iid tool so hopefully easily doable? Patman
Derek the Discovery keeper and owner
|
2nd Aug 2021 2:43 am |
|
|
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2462
|
You need a diagnostic tool like Gap to edit the ccf files but i think you can still use them without editing the files they just flicker o start up Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
|
2nd Aug 2021 6:19 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10485
|
Hopefully you didn’t buy ones marked AFS
Make sure battery is nice and charged. Ideally connect a battery charger while you do it. (Recommended!)
You go into the config menu
Select tested parameters
Scroll down to find HID lights or similar. Select fitted
Then press update and follow on screen instructions.
Car dash and radio&CD will go mad for a while.
If the new lights have an extra bulb next to the side light, that the old didn’t have there are 2 corner light settings you can change to enable
Once happy the dip beam lights work. Reset clock
|
2nd Aug 2021 8:43 am |
|
|