Member Since: 13 Sep 2011
Location: Essex
Posts: 586
Due to eBay excitement, I have ended up with two radars. If anyone is after one, I have a BH32-9G768-AD that I would like to sell. £175 is what I paid for it and I am obviously not looking to profit from it so would sell it on for this including postage. Send me a PM if you are interested!
7th Dec 2020 2:52 pm
RATA1
Member Since: 27 Feb 2020
Location: Somerset
Posts: 353
hgrimmett wrote:
RATA1 wrote:
OK - I had (and currently still have ) dumb CC but have both the 10 and the 4 way cable/connectors so when I fitted my new switch pack it was same as the old one.
I have heated wheel (but that is the other side) and flappy paddles so maybe there is the difference and why the additional 4 way is required. It just uses a resistive ladder I believe.
From the electrical diagram I looked at it just showed the vol +/- OK, set, res cruise with ACC etc. on the 10 way. So the additional 4 way may not be required if you don't have paddles?
You're right, the additional harness is for flappy paddles, which I already have The cruise controls is all CAN so obviously no extra wires required! FFS, so far I've wasted £120... hey ho, you live and learn.
I meant to put this up but forgot.
Yellow is the 4 way - C2284, green is the 10 way - C2283.
Headway +/- being the ACC distance.
Too late sorry but can you not return it if unopened?In today's world, if you contribute something, you don't contribute enough. If you contribute nothing, you receive everything.
2014 Discovery XXV
1961 Series 2
7th Dec 2020 2:54 pm
hgrimmett
Member Since: 11 Oct 2009
Location: Bledlow
Posts: 901
Ha, not your fault, no need to be sorry, I was in too much of a rush! I can probably send them back... -------------------------------------------------------------------
D4 '15 (64) Se Tech Indus Silver
Tesla Model Y LR (22)
Audi TT Roadster 225 (52)
Tesla Model 3 LR (70) (gone)
Porsche Boxster '96 2.5 5spd project (P)
Mini R52 S (54)
BMW 330e eDrive MSport '16 (gone)
D3 '07 (56) XS TDV6 Buckingham Blue (gone)
7th Dec 2020 3:11 pm
hgrimmett
Member Since: 11 Oct 2009
Location: Bledlow
Posts: 901
mjom89 wrote:
Due to eBay excitement, I have ended up with two radars. If anyone is after one, I have a BH32-9G768-AD that I would like to sell. £175 is what I paid for it and I am obviously not looking to profit from it so would sell it on for this including postage. Send me a PM if you are interested!
Glad to know it's not just me then! -------------------------------------------------------------------
D4 '15 (64) Se Tech Indus Silver
Tesla Model Y LR (22)
Audi TT Roadster 225 (52)
Tesla Model 3 LR (70) (gone)
Porsche Boxster '96 2.5 5spd project (P)
Mini R52 S (54)
BMW 330e eDrive MSport '16 (gone)
D3 '07 (56) XS TDV6 Buckingham Blue (gone)
7th Dec 2020 3:17 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8154
Mjon89:
I would have been interested but I’ve been advised to wait for a DPLA-9G768-AD, although in a previous post a DPLA has had to be reflashed .
As B = 2011my year and H3 is the type of chassis it is highly likely it would need a reflash for a 2014my.
It seems to be a minefield to me getting a suitable sensor, I think the cost of a reflash has got to be assumed at least it will help to justify the cost of the Iid which I already have.It can when others can't,
It will when others won't,
It goes where others don't.
8th Dec 2020 12:15 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8154
Yes that is the one to use If it matches the colour of the RH switchpack otherwise you would get the gloss black one. As mentioned rimmer bros or if you are local to a dealer try them as there will not be any carriage to pay from them even when they have to order it in. they can usually get it for the next day.
Can you or anyone else with more knowledge than me please confirm I am ordering the correct switch pack for a 2014my facelift, see reply from Rimmer Bros.
Click image to enlarge
It can when others can't,
It will when others won't,
It goes where others don't.
8th Dec 2020 10:53 am
Dondiddy
Member Since: 26 Dec 2019
Location: Hamilton
Posts: 307
If your wheel is Gloss black then that is the correct one to get. You cannot (as you would normally) use the vin to order the part for your car as this is a mod that requires a later switch.
8th Dec 2020 11:02 am
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6294
Yes that is the one to use If it matches the colour of the RH switchpack otherwise you would get the gloss black one. As mentioned rimmer bros or if you are local to a dealer try them as there will not be any carriage to pay from them even when they have to order it in. they can usually get it for the next day.
Can you or anyone else with more knowledge than me please confirm I am ordering the correct switch pack for a 2014my facelift, see reply from Rimmer Bros.
Click image to enlarge
I would aske them about part LR062416 which is normal colour coded and should be OK
Greg
8th Dec 2020 11:37 am
Dondiddy
Member Since: 26 Dec 2019
Location: Hamilton
Posts: 307
You have to get the one that matches the existing colour of your steering wheel switches as it has to match the R/H switchpack. You can take the switches apart and change over the ACC distance switches but that is a bit involved and not recommended. The colour you need should be easy to work out! (If you are in any doubt post a picture of your wheel!)
8th Dec 2020 11:48 am
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6294
Hello,
Thank you for messaging Britcar UK.
How can I be of assistance today?
i am trying to fit adaptive cruise control to my vehicel and found what looks like correct part for steering wheel controls as this item LR062416 can you verify for me please it is as shown on picture and compatible with D4 produced in late 2015?
vehicles vin ..........
hello?
Hi,
Did the vehicle have the cruise control before?
it has cruise now
LR062416 will be compatible to vin. You may need to check on forums on how to install this as it is not a recommend mod from Land rover
i know how to just needed confirmation if vin range would be OK with that part thank you
also what is vin range for this part should you not mind disclosing this info?
would it also work on 2014 year car?
From Vin FA000001 onwards
8th Dec 2020 11:49 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8154
The colour is correct for my car - gloss black. The question I’m asking is will this switch pack work on my Face lift 2024my with the above VIN?- I think it will but confirmation would be appreciated It can when others can't,
It will when others won't,
It goes where others don't.
8th Dec 2020 1:24 pm
Dondiddy
Member Since: 26 Dec 2019
Location: Hamilton
Posts: 307
Yes you should be ok with that switch even although yours is an earlier vin as this is a mod and the Fa vin quoted is from when Land Rover started to fit it as an option. I have a 2016 MY which when after having the battery disconnected reverts back to 1/1/2013 so the tech on it is at least that old! The caveat being that there is always a small chance that it won`t work and you have to sell the parts on. That was the way I looked at it when I was doing the mod on mine!
8th Dec 2020 1:58 pm
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6294
just a matter of a few warmer days
8th Dec 2020 1:58 pm
RATA1
Member Since: 27 Feb 2020
Location: Somerset
Posts: 353
M3DPO wrote:
The colour is correct for my car - gloss black. The question I’m asking is will this switch pack work on my Face lift 2024my with the above VIN?- I think it will but confirmation would be appreciated
RATA1 wrote:
Switchpack includes all that you have now with the additional buttons on the side for ACC. You can fit it prior to the ACC cabling/radar fit/config as normal cruise and radio etc works as normal until coded other wise.
You can fit it and it will work as I have done it already, as mentioned in the thread and the car will ignore the additional ACC buttons until you code it at the end of the job. All works as before until then. So IF the ACC retrofit doesn't work out on my 2014XXV then I'll just keep it fitted but move the radar on.
I just ordered the switch pack from LR in gloss black and collected it. Checked for a 10w and 4w and nothing else before paying, came home and fitted it. Job done. Never asked for the VIN as I told them what I wanted. I can take a photo of the part number on the box if you are in doubt?
As Dondiddy says, all at your own risk/expense and that is OK for me.
If you can wait a few weeks I can let you know how mine goes as mine is the same year as yours and I "plan" to do it over Christmas.In today's world, if you contribute something, you don't contribute enough. If you contribute nothing, you receive everything.
2014 Discovery XXV
1961 Series 2
8th Dec 2020 2:16 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8154
Thanks chaps, the reply I was hoping for.
How is the plug ordered from the site shop as can't see them listed?It can when others can't,
It will when others won't,
It goes where others don't.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
) dumb CC but have both the 10 and the 4 way cable/connectors so when I fitted my new switch pack it was same as the old one.
