albal
Member Since: 31 Jul 2011
Location: Southampton
Posts: 592
![](templates/vbnew/images/spacer.gif)
|
I assumed you had a word doc, so was offering to put it on the wiki
|
4th Feb 2014 6:03 pm |
|
|
floydstar
Member Since: 04 Jun 2011
Location: Bath
Posts: 92
![](templates/vbnew/images/spacer.gif)
|
ok just a misunderstanding. I will pull it together by the end of the weekend and you can publish it to wiki
|
4th Feb 2014 6:07 pm |
|
|
floydstar
Member Since: 04 Jun 2011
Location: Bath
Posts: 92
![](templates/vbnew/images/spacer.gif)
|
Steve (BoringOldGit) It would be good to link to the right parts on your site from the wiki pdf but I can't find the Alternator or full replacement kit now Are you still supplying them?
The following links would be good at the bottom of end of the guide:
VISCOUS FAN HOLDING TOOL
http://www.advancedfactors.co.uk/vs095-vis...2223-p.asp
VISCOUS FAN 32MM / 36MM SPANNER
http://www.advancedfactors.co.uk/vs0923-vi...2231-p.asp
REPLACEMENT ALTERNATOR
link???
REPLACEMENT ALTERNATOR KIT (includes all parts above plus free deliver)
link???
Cheers, Dan.
|
4th Feb 2014 7:28 pm |
|
|
|
floydstar
Member Since: 04 Jun 2011
Location: Bath
Posts: 92
![](templates/vbnew/images/spacer.gif)
|
Thanks Steve
|
5th Feb 2014 4:51 pm |
|
|
Advanced Factors
Site Sponsor
Member Since: 27 Nov 2012
Location: Southampton
Posts: 2648
![](templates/vbnew/images/spacer.gif)
|
I appreciate what you are doing but if I switch the links on it will cause me grief as I can't get the product until the end of Feb - perhaps just point to the holding page? and list the part numbers
DAN987 is the offending unit. Paul Redding
+44 (0)23 8052 2774
Order Parts Online at www.advancedfactors.co.uk
|
5th Feb 2014 4:54 pm |
|
|
floydstar
Member Since: 04 Jun 2011
Location: Bath
Posts: 92
![](templates/vbnew/images/spacer.gif)
|
Will do
|
5th Feb 2014 4:56 pm |
|
|
floydstar
Member Since: 04 Jun 2011
Location: Bath
Posts: 92
![](templates/vbnew/images/spacer.gif)
|
Hi Al - Are there any disco forum disclaimers to add to wiki docs?
|
5th Feb 2014 5:02 pm |
|
|
floydstar
Member Since: 04 Jun 2011
Location: Bath
Posts: 92
![](templates/vbnew/images/spacer.gif)
|
Did you want to post this to Wiki Al?
|
26th Feb 2014 9:06 am |
|
|
floydstar
Member Since: 04 Jun 2011
Location: Bath
Posts: 92
![](templates/vbnew/images/spacer.gif)
|
Guys - there was a youtube vid showing how to replace and solder new Rectifier on the Denso Alternator but b*ggered if I can find it now.
I want to replace the rectifier on my dead alternator
Anyone know where I can buy the rectifier? Its a Denso DAN987
Thanks
|
26th Feb 2014 10:09 am |
|
|
evo8
Member Since: 29 Jan 2008
Location: Zalesie
Posts: 289
![](templates/vbnew/images/spacer.gif)
![2013 Discovery 4 3.0 TDV6 S Auto Baltic Blue 2013 Discovery 4 3.0 TDV6 S Auto Baltic Blue](../images/veh/baltic_blue.gif)
|
Why are you guys also replacing the front belt when changing alternator?
I had the oil pump and all the belts replaced 2 months ago. Last week the alternator failed, shorted battery , leaving car completelly dead. Since there was no new unit available around, a local specialist replaced bearings, brushes, stator and rectifier diode bridge.
Did some 400km since then, battery still alive but new one is on the way as the old battery (7 years old) seems to be the reason why the alternator might have failed-prolonged charging at full power is not something these Denso units are designed for (based on the info from the specialist).
Shall i change the belt now as well? 2013 D4 TDV6 S; Baltic Blue; IID Tool BT
2007 D3 TDV6 SE, Auto; club Faultmate MSV2
|
2nd Jun 2014 9:35 pm |
|
|