Member Since: 07 Jul 2022
Location: Karlskrona
Posts: 45
It was +3C here this morning. The D3(2006) started fine without any help! After 6-8 minutes run time the FBH had not started. As soon as I turned on the cabin heating The FBH started. So, the FBH does not start automatically to help the engine warm up. Why not?
It is not a problem as I use a remote control to start the FBH as a park heater. Used as such, the car stated in -15C before Xmas (the glow plugs don't work, after 300,000 kms!)
I don't understand why the Fbh is there to help warm up the engine, but it doesn't come on automatically.
16th Jan 2023 6:06 pm
Flatlander
Member Since: 20 Jul 2015
Location: Here
Posts: 575
Because it's controlled by the climate control module, if it's 'off' as in, you pressed the 'off' button, it will not activate the FBH. A quirk of the software? possibly, but that's the way it is. It has the same effect upon the front seat heaters.
16th Jan 2023 6:10 pm
Gerald in Sweden
Member Since: 07 Jul 2022
Location: Karlskrona
Posts: 45
I wish I had front seat heaters!
16th Jan 2023 6:12 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Pete K wrote:
Motolab wrote:
The AUXILLARY function is always the dominant function.. so if used as a PARKINGHEATER with a clock or remote, it will shutdown when the engine is started and will come up again when needed as a AUXILLARY heater…
Some people say if the heater is in parking heater mode, and you start the engine below 5C the heater will not come up in auxillary mode and logs a fault code. I think I may have seen it once.
Any comments on this ?
Mine (parkingheater) shuts down when i open a door. (car wakes up) if i have activated the parkingheater function with my Altox app earlyer as soon as i start the engine the auxillary heater starts up again (when below 6 deg, celcius(can be 5 ) So i never experienced this phenomenon myself..
As with all other webasto TT is used and installed (quite a few ) BUT there is/are always the JLR specific software/parameters…. Who can influence behaviour, but if so i can not understand why some do “this” and other’s do “that” ….Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
16th Jan 2023 10:48 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Flatlander wrote:
Because it's controlled by the climate control module, if it's 'off' as in, you pressed the 'off' button, it will not activate the FBH. A quirk of the software? possibly, but that's the way it is. It has the same effect upon the front seat heaters.
That was my first thought also…. If the motor has climate control, it barely happens that it is in the off position, but i see that our swedisch friend, has a “base” model, perhaps without climate control?
Does the cabin heating need to switch on manually everytime? If not Why not keep that activated by default? (I do not know how the non climate control version is configured, sorry)Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
16th Jan 2023 10:55 pm
Flatlander
Member Since: 20 Jul 2015
Location: Here
Posts: 575
They all have the same basic control system, the fascia is different but the underlying control messages on LIN & CAN are the same.
There is only the automatic temperature control system, features such as heated seats, rear ATC etc. are added to it, but there is no 'base' manual control system as such.
16th Jan 2023 11:07 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Then do not turn it off…..Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
16th Jan 2023 11:22 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10735
No off button on single zone system. (Non climate /ATC)
Fan off could equal that result.
I would imagine turning the fan off would do the same, on the higher line ones, turning off the fan puts the module into an 'off' state and will shut down the FBH if it's running. (as does pressing the 'off' button)
17th Jan 2023 7:35 am
Gerald in Sweden
Member Since: 07 Jul 2022
Location: Karlskrona
Posts: 45
My facia is the same as Flatlander's. The heating system has to be turned on manually, unless left on from the day before.
If the heating is on but I turn the fan speed to "0" the FBH stays on. If I press the off button the FBH goes off.
The FBH setup is a bit strange to my mind, but I live with it. Getting the remote control to put the FBH in park heater mode is a godsend. I usually run it for 10-20 minutes, depending on outside temp., and switch it off 2-3 minutes before starting the car. I am worried about causing a system upset when I put the cabin heating after starting. Maybe I am just paranoid!!
17th Jan 2023 4:23 pm
Realist
Member Since: 21 Mar 2016
Location: South Wales
Posts: 357
All this talk about the FBH and emails received reminded me does anyone know anything about the below and how to get around it?
Realist wrote:
Update…..
Received a response from the eBay seller and I asked him why mine don’t work and what the password is.
He replied with……
“My friend... the password is at the Webasto Factory. Only with their help can we make your heater functionaly. The procedure is as follows: The current software is extracted with the help of a Webasto diagnostic device (see in my ads on ebay) and sent to Webasto. After we pay 100£, he will send us an unlocked and functional software that we must insert into the electronic unit of the heater”.
So why do I have to change the firmware and payout extra where others have just installed his device and works first time?
Why wait, just go for it and enjoy life.
Previous….
Discovery 300TDI
Range Rover Vogue
2010 Discovery 4 GS Santorini Metallic Black
17th Jan 2023 4:48 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10735
I think I used to leave the climate panel on the previous day, if I was expecting a cold start.
So it can do it's automatic fan speed stuff (when coolant warm). And re-start the FBH apparently
17th Jan 2023 5:39 pm
Flatlander
Member Since: 20 Jul 2015
Location: Here
Posts: 575
Gerald in Sweden wrote:
My facia is the same as Flatlander's. The heating system has to be turned on manually, unless left on from the day before.
If the heating is on but I turn the fan speed to "0" the FBH stays on. If I press the off button the FBH goes off.
The FBH setup is a bit strange to my mind, but I live with it. Getting the remote control to put the FBH in park heater mode is a godsend. I usually run it for 10-20 minutes, depending on outside temp., and switch it off 2-3 minutes before starting the car. I am worried about causing a system upset when I put the cabin heating after starting. Maybe I am just paranoid!!
Don't worry about it - essentially what happens if you've run it as a park heater is that the ATCU wakes up, sees the FBH running (when it thinks it shouldn't be) and issues a shutdown command to the FBH. The FBH does a graceful shutdown and everything is fine. Unless - you start the engine whilst the FBH is in it's shutdown, it ignores the start command from the ATCU and you have no boost heat from the FBH. Two ways around it...
1. As you mention, shut down the FBH 2-3 mins before you unlock the car (that's the point the ATCU wakes up).
2. a couple of minutes after starting the car, press the 'off' button, wait 2-3 seconds, then turn on the ATCU again, either by another press of the 'off' button to restore to whatever non-auto settings you were using, or just pressing 'auto'. That will get the ATCU to reissue the FBH start command and everything will work as intended.
I used either of those processes as required on my D3 for 10+ years, never caused a problem with the FBH or ATCU.
17th Jan 2023 6:17 pm
HairyFool
Member Since: 04 Jan 2023
Location: North Essex
Posts: 704
This morning -2deg. Start car but no FBH.
What should I expect on the plug?A visitor from the dark side, my other vehicle is an is still an EV. Strictly speaking its SWMBO.
17th Jan 2023 10:29 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10735
If you are expecting an engine start to have fired it up, check climate control panel on.
Do you have remote fbh start, which is what this thread is aimed at
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
) So i never experienced this phenomenon myself..
) BUT there is/are always the JLR specific software/parameters…. Who can influence behaviour, but if so i can not understand why some do “this” and other’s do “that” ….
