Member Since: 17 Dec 2019
Location: Tromso
Posts: 6
I was told by a fellow D3 owner that i can change the MPH to KPH on the ODO and trip counter. But he was talking about confirmed and unconfirmed modules in the program. And this change was in the unconfirmed ones. How do i get these in my program/tool?
6th Feb 2020 8:57 pm
G3Z
Member Since: 16 Dec 2018
Location: South Wales
Posts: 556
Quick newbie question.
I’m looking to buy one of these for my Disco - also wondering if I can scan my mates Disco for faults and clear some lights for him also?
After reading the GAP website, it reads to me that you can do the basics to do other vehicles? It’s just the enhanced stuff that’s locked to my own Disco?
It’s more so that I know I can help him out if we run into any problems on the lanes.
Also, just double checking that this tool does do the EGR ECU alteration for my 07 Disco?Defender 110 2.4 TDCi Utility Station Wagon.
2007 Disco 3 GS TDV6 Manual
200,000+ mile club 😎
27th Apr 2020 8:25 am
Oswiperus D3 Decade
Member Since: 02 Apr 2010
Location: Chelmsford, Essex
Posts: 1599
Yes you can read / clear faults and look at live values on your mates disco without licence.
You will have full capabilities on you own licensed vehicle, ie CCF updates and flashing etc. Think you may have to pay a bit extra for 07 EGR patch but not 100% sure on that.Stu
2016 D4 Landmark current
2022 Defender D300 SE Gone
D4 2014 XS Commercial - Gone
D4 2016 hse lux montalcino red - Gone
D3 2005 se java black - current
D3 2005 base manual - gone
D2 1999 TD5 E white - current
27th Apr 2020 8:36 am
G3Z
Member Since: 16 Dec 2018
Location: South Wales
Posts: 556
Awesome - thanks for the fast reply buddy 😎😎Defender 110 2.4 TDCi Utility Station Wagon.
2007 Disco 3 GS TDV6 Manual
200,000+ mile club 😎
27th Apr 2020 8:54 am
Ben4
Member Since: 28 Apr 2017
Location: Buckinghamshire
Posts: 934
G3Z wrote:
Quick newbie question.
I’m looking to buy one of these for my Disco - also wondering if I can scan my mates Disco for faults and clear some lights for him also?
After reading the GAP website, it reads to me that you can do the basics to do other vehicles? It’s just the enhanced stuff that’s locked to my own Disco?
It’s more so that I know I can help him out if we run into any problems on the lanes.
Also, just double checking that this tool does do the EGR ECU alteration for my 07 Disco?
for the EGR ecu flash do you need to replace parts or is it just a software patch?formerly Disco3Ben
2016 D4, Santorini Black
2007 D3, Black - sold
27th Apr 2020 1:30 pm
Oswiperus D3 Decade
Member Since: 02 Apr 2010
Location: Chelmsford, Essex
Posts: 1599
Think you need to blank them then apply the patch,Stu
2016 D4 Landmark current
2022 Defender D300 SE Gone
D4 2014 XS Commercial - Gone
D4 2016 hse lux montalcino red - Gone
D3 2005 se java black - current
D3 2005 base manual - gone
D2 1999 TD5 E white - current
27th Apr 2020 1:32 pm
G3Z
Member Since: 16 Dec 2018
Location: South Wales
Posts: 556
I’m looking to buy one of these for my Disco - also wondering if I can scan my mates Disco for faults and clear some lights for him also?
After reading the GAP website, it reads to me that you can do the basics to do other vehicles? It’s just the enhanced stuff that’s locked to my own Disco?
It’s more so that I know I can help him out if we run into any problems on the lanes.
Also, just double checking that this tool does do the EGR ECU alteration for my 07 Disco?[/quote]
for the EGR ecu flash do you need to replace parts or is it just a software patch?[/quote]
You blank them and then apply the ECU patch buddy. Blanking them is easy.Defender 110 2.4 TDCi Utility Station Wagon.
2007 Disco 3 GS TDV6 Manual
200,000+ mile club 😎
27th Apr 2020 3:36 pm
Ben4
Member Since: 28 Apr 2017
Location: Buckinghamshire
Posts: 934
formerly Disco3Ben
2016 D4, Santorini Black
2007 D3, Black - sold
27th Apr 2020 4:55 pm
Irish Rover
Member Since: 02 Jul 2009
Location: Solihull
Posts: 178
Hard Reset
Not wishing to hijack the thread but can someone walk me through doing a hard reset using my IId tool? I did it the manual way and my clock on dash returned but when I went to it a couple of hours later it had disappeared again even though the battery was being charged by a Ctek charger. Have had the IId for a while but still an absolute novice with it!
28th Apr 2020 8:47 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14103
4.7.11 All ECUs
Vehicle Reset (L322-10, L319, L320)
This routine will send a reset or reboot command to all ECU’s. It is equivalent to a soft reset.
Usage
On L319-04, it should be used to restore the clock on the instrument pack ECU (--:-- displayed). It can also be used to solve other unusual issues.
Note : This function will return all user settings (radio station etc) to factory default.
Hope that helps
28th Apr 2020 9:48 pm
Irish Rover
Member Since: 02 Jul 2009
Location: Solihull
Posts: 178
Many thanks. Will have a go at that today and see how I get on.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum