Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D4)

D4 XS wiring for rear camera
Post Reply  Down to end
Page 16 of 22 <123 ... 151617 ... 202122>
swansty
 


Member Since: 21 Sep 2008
Location: Northern Ireland
Posts: 914

Northern Ireland 2010 Discovery 4 3.0 TDV6 XS Auto Zermatt SilverDiscovery 4

Rob55 wrote:


Click image to enlarge


Click image to enlarge


This is the back of the screen. I didn't notice any unused connectors though that doesn't mean there isn't any. I just wasn't looking for one.

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Mr. Green
  
Post #162683917th Mar 2016 1:49 pm
View user's profile Send private message View poster's gallery Reply with quote
Naks
 


Member Since: 12 Jul 2010
Location: Stellenbosch, Republic of the Western Cape
Posts: 756

South Africa 2011 Discovery 4 3.0 SDV6 SE Auto Fuji WhiteDiscovery 4

from one of Wiggs' previous posts, it looks like pins 2 and 5 are for the reverse cam, while pins 1 & 4, and 3 & 6 can be used for other cams.

I have just been to the sound shop and they will see what can be done. They will test first to see if it works, and then install.

I will document, with photos to help others
 --
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged



Defender Puma Workshop Manual: https://bit.ly/2zZ1en9
Discovery 4 Workshop Manual: http://bit.ly/22l8YHh
Range Rover/Sport L320/L322/L494 Workshop Manual: http://bit.ly/2iH7jgG 
 
Post #162685317th Mar 2016 2:20 pm
View user's profile Send private message View poster's gallery Reply with quote
skimble
 


Member Since: 11 Sep 2011
Location: Hants
Posts: 2

United Kingdom 2016 Discovery 4 3.0 TDV6 SE Tech Auto Santorini BlackDiscovery 4

Great thread and love the detail and desperate to have a go

Does any one know if:

I can add a rear view parking camera to a Disco 4 SE Tech MY2016 ?
If yes then how do I find out the part numbers to order ?

I tried an independent dealer and whilst helpful they were no able to supply the relevant part numbers. I took the numbers from this thread but was told they were for older MY and may be different for MY16

Thanks in advance
  
Post #164803529th Apr 2016 4:28 pm
View user's profile Send private message View poster's gallery Reply with quote
Bodsy
Site Sponsor 


Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Yes you can, I've done quite a few, both aftermarket camera (better quality and significantly cheaper) as well as LR ones. I'll dig the part numbers out when I get a few mins. Thumbs Up
 Bodsys Brake Bible

D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling


Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here 
 
Post #164814629th Apr 2016 8:19 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
skimble
 


Member Since: 11 Sep 2011
Location: Hants
Posts: 2

United Kingdom 2016 Discovery 4 3.0 TDV6 SE Tech Auto Santorini BlackDiscovery 4

Bodsy

You are a star

I await the info in anticipation. To be double cheecky a good source for parts would be a great help Thumbs Up

Mike
  
Post #164837230th Apr 2016 1:55 pm
View user's profile Send private message View poster's gallery Reply with quote
l00kin4
 


Member Since: 27 Feb 2015
Location: Sydney
Posts: 46

Australia 2014 Discovery 4 3.0 SDV6 SE Auto Corris GreyDiscovery 4

Interested in this too - would really like to know what the part number is for the LR genuine rear camera for MY14 onwards...

Thanks,
David
  
Post #16503894th May 2016 11:07 pm
View user's profile Send private message View poster's gallery Reply with quote
Bodsy
Site Sponsor 


Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

You need
Tailgate microswitch with camera wiring - LR021100 Around £50ish
Analogue camera LR023365 supersedes to LR043493 around £200ish
Additional tailgate wiring loom LR015458 *superseded to LR071911 £around £60ish

I'll repeat, that the genuine camera quality of image is really not very good, the aftermarket (ccd) cameras are far better image quality.

*updated loom part number
 Bodsys Brake Bible

D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling


Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here 


Last edited by Bodsy on 5th May 2016 11:47 am. Edited 1 time in total 
Post #16503954th May 2016 11:23 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
l00kin4
 


Member Since: 27 Feb 2015
Location: Sydney
Posts: 46

Australia 2014 Discovery 4 3.0 SDV6 SE Auto Corris GreyDiscovery 4

Thanks for that. I've actually (retro)fitted LR043493 to my MY14 D4 but still haven't worked out if I can / how to get the yellow lines to 'bend' with steering input. I also don't have the option to access the camera via the menus, but only displays when reverse is selected (or Neutral and then camera chosen from menu)...

I have wondered if the bending lines required a camera with CAN bus output...

Since the original installation I have had a software update to fix the overexposure issue, which also changed the menu options on the head unit. The CCF settings I had to make (posted in this thread previously) were not quite in line with other MY14's I compared to but I thought that may have been because of the software version difference in the touchscreen head unit.

The WSM states:
Rear View Camera
The RVC (rear view camera) receives power at all times when the ignition is on or the engine is running. When R is selected, the rear view camera receives a reverse gear selected signal from the TCM via the HS (high speed) CAN bus. The camera then sends a MS (medium speed) CAN message to the TS (touch screen) to display the image.

I might try the CCF settings again to see if I can get the lines to bend but any thoughts most welcome.

David
  
Post #16503964th May 2016 11:34 pm
View user's profile Send private message View poster's gallery Reply with quote
l00kin4
 


Member Since: 27 Feb 2015
Location: Sydney
Posts: 46

Australia 2014 Discovery 4 3.0 SDV6 SE Auto Corris GreyDiscovery 4

One other item that may be of interest too. The tailgate loom LR015458 was superseded to LR071911 because of cable corrosion issues. Topix reference SSM72233

David
  
Post #16503974th May 2016 11:39 pm
View user's profile Send private message View poster's gallery Reply with quote
Bodsy
Site Sponsor 


Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Thanks, updated the part numbers. Thumbs Up
 Bodsys Brake Bible

D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling


Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here 
 
Post #16505525th May 2016 11:47 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
l00kin4
 


Member Since: 27 Feb 2015
Location: Sydney
Posts: 46

Australia 2014 Discovery 4 3.0 SDV6 SE Auto Corris GreyDiscovery 4

One more addition to this. Using VIN for an MY14 fitted with the factory reversing camera, I checked the camera part number. Some time early in the life of MY14 D4's, the camera has changed from LR023365 (superseded by LR043493) to LR051728- which I assume is the CAN bus connected version... I haven't been able to verify this or find a picture yet.

David
  
Post #166770115th Jun 2016 7:42 am
View user's profile Send private message View poster's gallery Reply with quote
Someone-Gone
 


Member Since: 21 Dec 2015
Location: Gone
Posts: 5117

United Kingdom 

Simply put, I always believed the bendy lines were only available if you had surround cameras, therefore a Cambus issue, but possibly additional hardware required too.

Personally I like the straight lines better than the bendy ones and it's the bendy ones I've got. Rolling Eyes
  
Post #166771015th Jun 2016 8:05 am
View user's profile Send private message View poster's gallery Reply with quote
l00kin4
 


Member Since: 27 Feb 2015
Location: Sydney
Posts: 46

Australia 2014 Discovery 4 3.0 SDV6 SE Auto Corris GreyDiscovery 4

I thought that too but have checked and MY14 D4's with reverse camera only (no surround camera system) have bendy lines. I had initially thought that the bending of the lines was based on steering input via CANBUS but haven't verified that. I do have a couple more options to try in the CCF configuration now that the head unit software has been updated but not sure how much luck I'll have with that.

If / when I get around to experimenting with it I'll post up the results.

I am happy with my straight lines though... Smile

David
  
Post #166775015th Jun 2016 9:22 am
View user's profile Send private message View poster's gallery Reply with quote
cyclingeeyore
 


Member Since: 27 Jun 2016
Location: West Sussex
Posts: 8

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Nara BronzeDiscovery 4

So I am a noobie and have 2011 XS, how can I tell what connectors I have on the back of my head unit without taking it apart? I would like to fit a camera as easily as possible and know that I have the Fakra and power cables in the roof lining by the tailgate.

If I go for a aftermarket number plate camera (as Bodsy says the image is better) I assume that I could still fit that to the LR Fakra but using a conversion cable and the same for the power. I don't have the ability to switch things on though in the software.

Thanks
  
Post #167362327th Jun 2016 1:13 pm
View user's profile Send private message View poster's gallery Reply with quote
Bodsy
Site Sponsor 


Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

2011 won't have the fakra for the video.
It's the two pin connector fir video signal and Earth. Thumbs Up
 Bodsys Brake Bible

D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling


Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here 
 
Post #167363027th Jun 2016 1:46 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 16 of 22 <123 ... 151617 ... 202122>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site