Member Since: 02 Mar 2015
Location: Castleford
Posts: 97
Hi Guys, I'm happy to report that my D4 retro fit camera is nor fully functional
after some sound advice and a visit from CDS to confirm that the CCF file was correctly set I took the advice of stenh02 and checked the wiring connections and sure enough the fakra connection on the back of the nav screen had come off, broken off in fact and damaged the plug luckily I managed to swap the cable round and was a little more careful putting the unit back in the dash, a little PVC tape on the damaged under the gear selector and and hey presto it all works.....
Thanks for all the help and advice of the forum members
What's next ???D4 XS 2012 black with black
Blackview DR6000
Boot shelf
Cannondale EVO hiMod
Defender 90 1996 Epson green
Vogue TDV8 2006 black with black
Vogue TDV6 2005 black with parchment
Vogue TDV6 2003 black with ivory
Vogue SE 4.4V8 black with parchment
4th Apr 2015 6:09 pm
stenh02
Member Since: 01 Jul 2009
Location: Up North
Posts: 270
all good.
Remote timed climate?
Side steps?
Heated wheel?
5th Apr 2015 8:50 pm
lordackers
Member Since: 02 Mar 2015
Location: Castleford
Posts: 97
Ooooo heated steering wheel sounds good D4 XS 2012 black with black
Blackview DR6000
Boot shelf
Cannondale EVO hiMod
Defender 90 1996 Epson green
Vogue TDV8 2006 black with black
Vogue TDV6 2005 black with parchment
Vogue TDV6 2003 black with ivory
Vogue SE 4.4V8 black with parchment
5th Apr 2015 9:02 pm
stenh02
Member Since: 01 Jul 2009
Location: Up North
Posts: 270
Seems later wheels need activated but earlier ones don't - not sure why. You will probably need a new clock spring as well. There are more threads if you search.
5th Apr 2015 9:18 pm
lordackers
Member Since: 02 Mar 2015
Location: Castleford
Posts: 97
Thanks mate I'll have a search and see how I get on
CheersD4 XS 2012 black with black
Blackview DR6000
Boot shelf
Cannondale EVO hiMod
Defender 90 1996 Epson green
Vogue TDV8 2006 black with black
Vogue TDV6 2005 black with parchment
Vogue TDV6 2003 black with ivory
Vogue SE 4.4V8 black with parchment
5th Apr 2015 9:30 pm
l00kin4
Member Since: 27 Feb 2015
Location: Sydney
Posts: 46
A question though. I now have it working with guidelines (although they don't seem to bend)
For the settings above I wanted to confirm the actual values set?
I have it working with these settings:
Park assist camera : Park assist camera
and
Parking camera : Fitted
but all the comparisons I did (on Blackbox Genesis for my Nanocom) to other VINs with factory fitted reversing cameras had:
Park assist camera : Rear camera only
This didn't work.
Just wondering if I have some other setting not quite right...?
Thanks,
David
Last edited by l00kin4 on 27th Aug 2015 2:08 pm. Edited 1 time in total
25th Aug 2015 8:53 am
l00kin4
Member Since: 27 Feb 2015
Location: Sydney
Posts: 46
will247 wrote:
Is it the same camera and loom part numbers for MY15?
I'm defiantly going to fit this Didn't realise it would be that easy!
As per post above I've just done this with my MY14 - no guarantees but assume it will be similar
Parts list I used:
1 x 1m Fakra Z female cable like this: (http://www.ebay.co.uk/itm/GPS-1m-Antenna-Extension-Cable-FAKRA-Female-Female-Code-Z-Adapter-Pigtail-/120993869660?hash=item1c2bcbef5c)
1 x LR043493 - camera
1 x LR071911 (replaces LR015458) - micro switch with camera wiring - this provides power and video connection from camera to next loom
2 x 6g x 16mm self tapping screws to fix camera
1 x LR021100 - tailgate loom with camera wiring
6 x FYC 500040 - clips for radio / air vents trim (these are a precaution in case any pop off during removal of the trim and vents around the head unit )
25th Aug 2015 9:08 am
l00kin4
Member Since: 27 Feb 2015
Location: Sydney
Posts: 46
A quick additional update on this. BBS have advised that to get the bendy yellow lines going to reflect input from steering may require a flash update but files not available yet.
They're investigating...
I'll post an update when I hear anything.
Meanwhile very happy to have a working reversing camera, even if the lines don't bend!
David
27th Aug 2015 2:07 pm
stenh02
Member Since: 01 Jul 2009
Location: Up North
Posts: 270
27th Aug 2015 8:51 pm
Pokko
Member Since: 03 Dec 2010
Location: Finland
Posts: 3
Rob55 wrote:
Ok guys the wiring is definitely not pre fitted to my 2010 XS
As you can see in the pic below I have the new loom coming through the tailgate but there is no fakra and no green/black connector on the car:
Click image to enlarge
I am happy I can just run my own fakra up the middle of the car to the nav unit. What about the black/green, I assume this is live and earth. Do these transmit any signal or can I just take a positive feed off somewhere up the back of the car such as the rear 12v power outlet in the boot?
Rob
I have the same project ongoing to my 2011. I assume that that black is negative and green is +12V for camera loom?
Thanks for great pictures!
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated
I already have the reverse camera fitted from factory, but I want to fit one of these to the front to have low-down forward visibility when off-road:
Click image to enlarge
Reading up on this thread it would seem that my D4 has a 6-pin connector block instead of the Fakra connectors. How can I confirm this without prying open the dash?
How would I wire this camera into the block in order to have the extra video shown via the diagnostics screen?
Thanks--
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged
thanks, any advice on how to wire the extra camera into the screen with the 6-pin connector?
To clarify, I'm not trying to see two camera feeds at the same time - I only want to see the forward feed when I am offroad, which I can switch to via the diagnostics screen.--
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged
if you have a factory rear cam, then the 6 pin connector will be used by it. a google search found this thread: http://www.instructables.com/community/Tog...s-on-one-/ but I have no idea if the LR 6 pin screen connector is set up the same. You probably just need some sort of switch which has both cameras wired in on 1 side and then 2 wires outputting to your screen, then switch between them as required.
with the 6-pin connector, is there no AUX input, that I can switch to via the diagnostics screen?--
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
luckily I managed to swap the cable round and was a little more careful putting the unit back in the dash, a little PVC tape on the damaged under the gear selector and and hey presto it all works..... 
all good.
