I thought I would post a picture of the wiring under my D4 XS rera panel. I am assuming the unused black and brown connector relate to rear reversing camera but perhaps someone could confirm. 8)
PS First time posting an image - hope it works
Just done one today but I could not use the brown Farkra connecter as the other end that should go to the touch screen was missing, so had to make a lead up to fit the screen.
You can use the power supply from the double plug in your picture to power the camera as this is live and earth.
Flack
2nd Feb 2013 4:15 pm
ajsms999
Member Since: 28 Jul 2009
Location: shropshire
Posts: 206
The other end of that brown Fakra connection goes to a black Fakra located to the left of the rotary gear selector just below the central cubby box console. You don't have to remove it completely - just loosen it enough to lift it up and get access.
But you still have not got the 6 pin plug for the back of the monitor, its quicker and easier to just run a new complete av lead in and make the end off with some pigtails, unless you can get hold of the connector then use that ..
Flack
3rd Feb 2013 9:44 am
ajsms999
Member Since: 28 Jul 2009
Location: shropshire
Posts: 206
Sorry Flack - don't get what you mean, on my 2012 sdv6 all i needed was to connect from that fakra up to the back of the screen - I just used an smb push in connector, attached to coax.
No sign of a 6 pin connector on mine.
The only other items were the tailgate microswitch (to power the camera) and the tailgate loom.
At some point there is a crossover of the screen and the one I did yesterday did not have the fakra connectors, they do not use them on the newer screens they use a 6 pin connector.
I was just like you going to do what you have done but you can't on the newer screens..
Flack
3rd Feb 2013 2:18 pm
dangerdave
Member Since: 23 Nov 2010
Location: <>
Posts: 4495
Dave its the newer software that seems to be the change point as I have done a couple of early Land Marks and they had the Fakra connectors. this Land Mark I did yesterday had the 6 pin socket.
I did a look at one a few weeks ago now and it I remembered last night seeing the 6 pin socket on the back of the screen as we was upgrading to the latest sat nav system and I never thought about the Fakra's at the time...
To be honest its no big deal you just make the end off different..
Another change from good old LR..
Flack
3rd Feb 2013 2:31 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Gearstick = 6 pin connector
Pop up rotary gear = fakraG4 Gone ...but not forgotten
3rd Feb 2013 2:40 pm
dangerdave
Member Since: 23 Nov 2010
Location: <>
Posts: 4495
Admin note: post content removed at user request
3rd Feb 2013 2:47 pm
Dave T
Member Since: 03 Jul 2009
Location: Glasgow
Posts: 6910
Excuse me for being thick here, are you saying that all you need, with a pop up knob, is a camera and bit of wire with the right connector?Joined the BMWX5 45e group
1994 Defender 90
2015 RRS Corris Grey/Black roof
2016 D4 Graphite Santorini Black
2012 D4 XS Orkney Grey
2005 D3 S Maya Gold
Convoy for Heroes 2011
3rd Feb 2013 4:09 pm
ajsms999
Member Since: 28 Jul 2009
Location: shropshire
Posts: 206
Thanks Flack & Wiggs for the clarification.
Dave T - if you have the knob, to do an OEM fitting, you will need:
1 camera
1 tailgate microswitch with camera wiring
1 tailgate loom again with camera wiring
1 custom rg74 coax pigtail with male smb connectors on each end.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
