BBS SPY
Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
  
|
| BBS's release of V1.30 for faultmate MSV-2 |
|
We are now just hours away from releasing V1.30 for the faultmate, and it contains such a vast amount of additional access functionality and capabilty for so many of the Disco 3 / RR Sport vehicle systems that only writing the help files for it all, is causing any final delay. It will however be released before the weekend.
In addition, we have also now bought the CCF edit capability right up to date, including adding all the new stuff for 2012 MY vehicles.
Probably more than any other previous upgrade, this one has been a particularly long and hard slog, as it is mainly all new stuff that we have had to write from scratch but can now be re used to make further developments on future upgrades much quicker and easier. I therefore hope you will join me in complimenting the MSV-2 development staff on this really quite significant achievement.
|
 21st Jun 2012 5:31 pm |
|
|
buellbeast
Member Since: 30 Jul 2008
Location: Exile
Posts: 1885
  
|
i'm refreshing the forum as we speak  Club Forum Criminal !!!
|
| 21st Jun 2012 5:48 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Will this fix the 1.29b issues...? Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 21st Jun 2012 8:07 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6313
 
|
Quote:Probably more than any other previous upgrade, this one has been a particularly long and hard slog, as it is mainly all new stuff that we have had to write from scratch but can now be re used to make further developments on future upgrades much quicker and easier. I therefore hope you will join me in complimenting the MSV-2 development staff on this really quite significant achievement.
As Bodsy has asked are most of the bugs ironed out now in this release...
Flack 
|
| 21st Jun 2012 8:12 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
excellent news Colin G4 Gone ...but not forgotten
|
| 21st Jun 2012 8:48 pm |
|
|
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
no  ..think hes fell out with me ...dont get to test them any more G4 Gone ...but not forgotten
|
| 21st Jun 2012 8:58 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6313
|
I was just going to ask the same question ...to Wiggs..
Flack
|
| 21st Jun 2012 9:20 pm |
|
|
D4JWW
Member Since: 20 Oct 2009
Location: London, UK
Posts: 1319
|
Good news Colin, hope there's more live data of Egr valves on D3? A few mods... and keeping it all running...Faultmate MSV2
MY09EGR's blanked Thanks Bellautos, BAS
|
| 21st Jun 2012 9:38 pm |
|
|
JDB
Member Since: 25 Mar 2010
Location: NW Hampshire
Posts: 2486
|
- something else to do and play with over the w/e (and stop me doing all the jobs I was meant to be doing.....)
|
| 22nd Jun 2012 4:38 am |
|
|
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
does this mean it never got released ???
theres nothing on the web site ..and they will have all gone home by now  G4 Gone ...but not forgotten
|
| 22nd Jun 2012 3:26 pm |
|
|
BBS SPY
Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
|
The 1.30 upgrade incorporates 3 main elements, all of which i believe have good reason to not really require any extensive degree of beta testing prior to release.
A) Since 1.29b there have been quite a number of problems reported that we have been able to solve on an, as and when basis, most often with us supplying a patch to the person reporting the problem, so the fix can be tested. Unless a Beta Tester actually had the situation that highlighted the problem, they would be unable to test this. These interim pre tested fixes are automatically included in any next major release.
B) The main reason, and urgency in making this release is the non working CCF edit for 2012 vehicles fix. We already know that we had figured out the main problem of why the CCF would not write back, which was simply due to the new 2012 BCU Part Number not being listed in the Boot loader look up table.
We have however also ensured that any and all values and newly added parameters are fully and properly handled in both the CCF and EUCD CCF, there were actually some in the 2010 version that were not, which meant the data being written back was being slightly changed from what had been read, where it should not be. We have extensively checked that this does not now happen and the system always re produces a perfect copy of the CCF data.
I should also add that although it took us a while to get to sort out the CCF, this was almost totally down to our setting up the respective development hardware, now we have it, should any problem be discovered, we can near instantly solve it.
C) We have been slogging away for some time, adding Live Data inputs and output control functionality on quite a number of the Discovery 3 vehicle systems. There are literally hundreds and hundreds of these, such that it would overwhelm a Beta Tester and take some considerable time and effort to test them all. There may well be some that are not quite right yet, but as they are things owners would not have had anyway, and it is hardly going to be a step backward, we figured that as we are making a release, we may as well include all this.
However, despite all this, i accept that there is the possibility that there may be some major unforeseen problem, so this afternoon we have supplied only a few members with the upgrade, including Wiggs (see i still love ya Buddy, check your E-mail )
I hope they can find the time to give it a quick once over and get back to us.
|
| 22nd Jun 2012 3:46 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
Love ya back 
I was only kidding ..
not got Ronnies Email ...but got yours G4 Gone ...but not forgotten
|
| 22nd Jun 2012 3:53 pm |
|
|
BBS SPY
Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
|
I know that Bro.
I am well looking forward to you cooking up my breakfast at billing in 2013 
After all, i figure you did not build that Sankey just for show and for the love of god, never mind all that super clever solar power stuff, just put a bloody culender in it
In the meantime, if you ain't too busy flitting around Europe and all, me and the guys would dearly love to get your input on this here V1.30 upgrade.
|
| 22nd Jun 2012 6:32 pm |
|
|
- 
