Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
Finally got to the bottom of this version problem and fixed it. How a simple errant space at the end of a line and some stupid OS methedology of alphabetising entries in a file in the wrong order is a bit beyond me, but as ever we found it and sorted it, along with the other stuff. so there is now a new version of 1.30 that replaces the previous one for anyone who wants fix these minor things.
It is also now posted up in the Main support downloads section as well as being linked to in the releases thread, which will save the confusion you had Sinbad58.
Chesh, I am sorry, but to be eligable for this discount you do need to have 50 or more posts.
I also do not know where you have been sending E-Mails to, but i have nothing in my Inbox from you.
Does this mean that the version for the 4004 file is now corrected and shows the right one in the right hand side of the SM.
Flack
18th Jul 2012 7:35 pm
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
mick
I've got that problem with 4004 and 4007
18th Jul 2012 8:01 pm
aljo
Member Since: 20 May 2007
Location: west sussex
Posts: 804
Ive got that problem with
4004
4005
4007
and a few others Last night I lay in bed looking up at the stars in the sky and I thought to myself, where,s the f**king ceiling!!
18th Jul 2012 8:05 pm
BBS SPY Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
Yea the versioning handling is really vastly over complex.
As ever the problem was not really our fault at all, unless you count upon our stupidly trusting Bill Gates and his Windows software, although we did have an errant space in the file that was not entirely his fault.
The problem will have affected quite a few modules as you have noted, but hopefully now all is well on all of them.
I do have to stress though that this was just a problem in the reported version numbers and in no way affects any functionality of the system.
What have you done with the D4 backup & restore page on this release its not there now do we not need it now or has it been missed..?
Flack
18th Jul 2012 8:40 pm
BBS SPY Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
Not totally sure i get you Flack.
LR can apparently add new values and features to the CCF at any point in time, which has caught us out, but they cannot retro add anything to any existing vehilcles they have already built and sold.
The new raw CCF save and resore function is therefore only a feature that helps anyone attempting to edit a CCF of a vehilce produced after our last upgrade restore the origional data to the vehicle should there be something new we have not catered for in our last release that causes trouble.
It is really just future proofing our system against any unknown and unforseen changes LR may make in the future.
We are currently well beyond the Disco 3 and as such there is no requirement of raw back ups on that model, so you will only see it on a D4.
LR can apparently add new values and features to the CCF at any point in time, which has caught us out, but they cannot retro add anything to any existing vehilcles they have already built and sold.
The new raw CCF save and resore function is therefore only a feature that helps anyone attempting to edit a CCF of a vehilce produced after our last upgrade restore the origional data to the vehicle shoukld there be something new we have not catered for in our last release.
We are currently well beyond the Disco 3 and as such there is no requirement of raw back ups on that model, so you will only see it on a D4.
Colin
Its not there on the D4 page now, I have just re-installed the other 1.3 version that had the problem with the save?restore buttons and I now have the D4 backup & restore page back now on the BCU settings page..
Hi there BBS Spy.
Not sure of the email address, been hitting the "Private Messages" button and sending via there.
Been a member for two years and didn't realize there was a quota required for forum discounts, sounds a bit elitist to me but there you go.
Will check out and see what's available locally I guess.
Thanks anyway for the reply.
Cheers
19th Jul 2012 2:41 am
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
Flack wrote:
Colin
What have you done with the D4 backup & restore page on this release its not there now do we not need it now or has it been missed..?
Flack
yep got the same problem mick, I've downloaded the new version and the save and restore feature is missing from the D4 bcu
19th Jul 2012 3:39 am
BBS SPY Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
Oh, err, umm, ahh, well ya see.
Checked it this morning and sure enough you guys were right,
We are still at a total loss as to how an older version of 1.30 that did not have the Back up and restore stuff in it for the D4 got uploaded onto our web site instead of the right one.
Tis all now fixed,
I hope.
19th Jul 2012 5:14 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
How about other issues ... Any joy with them yet ?G4 Gone ...but not forgotten
Well I have installed it and it all looks ok all the modules updated ok but sm4007 still has the s= before it so not sure if that is right.
I even got a 26 min transfer completed without it dropping out, the D4 Backup and Restore page is now back and all in order... So Colin take a breather bud ...
Flack
19th Jul 2012 7:16 pm
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
its looking good colin on the note book, will let you know tomorrow when i try it on the toughbook
19th Jul 2012 9:15 pm
parrafin23
Member Since: 04 Dec 2011
Location: Buskeud
Posts: 681
Finaly got installed the 1.30
Firmware update to the msv-2 was needed? so I selected yes to that.
Works like a charm.. and the 3min lcd screen test.. cool..
I too have the non function of moving the seat.
and some other issues where the live data is not displayed at all..
I was looking at the problem about the all terrain module. under driver aid.
I tried to read it and it ended up with the faultmate could not communicate with the ecu and so on.
I can see that when i click the read button it says Ecu awake. and throw up this message.
So I removed the key and clicked sleep..
I did this in version 1.29 with no problem.
now with 1.30 i get System is not licensed for this vehicle.. that was strange..
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
