Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
07A00001 on it superseeds 3 times to finally end up at LR013487
LR002465-LR007131-LR007798-LR013487
The latest one is substantially beefed up to stop the failure.
Most dealers will deny knowledge of it tbh. Part is about £70 fitting is an extra three hours according to LR.
If you speak to LR customer service, they may well pay for it, many on here have had success with that.Bodsys Brake Bible
Member Since: 08 Jan 2011
Location: Chilterns
Posts: 4130
Took in a D3 for new alternator and they had to replace the CBT and while I was there they did TWO others. Three CBT in one morning. Its faulty factory part.
30th Jun 2014 1:43 pm
SteveMilner
Member Since: 17 Jul 2012
Location: West Yorkshire
Posts: 131
When I spoke to LRCS I got a bs politicians answer on the matter.
I was looking to see if they admitted that they had a problem and were replacing them.
All I got was "If you have a problem, take your D3 to your local dealer"
Useless!
30th Jun 2014 1:43 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20837
Gazellio @ Prestige Cars wrote:
Took in a D3 for new alternator and they had to replace the CBT and while I was there they did TWO others. Three CBT in one morning. Its faulty factory part.
Gary, the cambelt tensioner is in behind the cambelt cover. They would have no need to remove said cover to do an alternator.
The aux belt tensioner, on the other hand, is also fairly common for falling apart.
But, this is a pulley on a bearing, with a spring loaded arm, which would be a wear and tear partMy D3 Build Thread
Member Since: 10 Aug 2014
Location: helmond
Posts: 1
I a'm the next victim off the broken timing belt tensioner.
my car has driven 109k, and i had change the belt and the tensioner it at 95k, it was 7 years old, so i thought it was time to do it.
is there some body who has won a lawsuit against LANDROVER over this item.
I would like to hear about it specially if it is a Dutch case [/img]
12th Aug 2014 8:25 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26772
Bodsy wrote:
07A00001 on it superseeds 3 times to finally end up at LR013487
LR002465-LR007131-LR007798-LR013487
The latest one is substantially beefed up to stop the failure.
Most dealers will deny knowledge of it tbh. Part is about £70 fitting is an extra three hours according to LR.
If you speak to LR customer service, they may well pay for it, many on here have had success with that.
Perhaps drop Pete@Landrover in the Land Rover customer relations forum on here a PM.
12th Aug 2014 9:07 pm
h4rr1s51
Member Since: 27 Nov 2011
Location: liverpool
Posts: 17
My08 failed today. Had belts and housing replaced less than 12000miles ago.
18th Aug 2014 12:25 pm
Woolmeister
Member Since: 26 Mar 2007
Location: Chandler's Ford
Posts: 3464
Sorry to hear this.
When you say you had the "housing" replaced, what you mean? Do you mean you had the oil pump replaced as well? And it's failed already? If the oil pump casing (what the tensioner bolts into) has failed within 12k miles then I would definitely be looking for 100% contribution towards a new engine from LR. It's possible the oil pump was replaced by one of the ones?
You need to talk to "Pete@LandRover" on here. One of these days, LR might actually acknowledge they have a problem rather constantly trying to sweep it under the carpet...
Steve2021 BMW iX3 Premier Edition in Carbon Black ⚡️🔌
2019 Škoda Kodiaq 2.0 Tdi 190 DSG Sportline in Quartz Grey. Excellent vehicle. Gone.
2017 Discovery Sport HSE Auto in Carpathian Grey and Ebony Leather. Modern JLR Junk. Gone.
2007 Discovery 3 TDV6 S Manual in Zermatt Silver with Ebony Cloth (143k) Gone, but now patrolling the Asia section of the West Midlands Safari Park!
18th Aug 2014 12:31 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20837
08's did have issues with broken conrods and snapped crankshafts
We need more info.
Was it the oil pump that failed?
New belt broken?
Idler/Tensioner failed?
Dare I say it, poor workmanship?
First things first though, the front end needs stripped to find the actual failureMy D3 Build Thread
Member Since: 27 Nov 2011
Location: liverpool
Posts: 17
Not sure as yet will keep you all posted. Wife was driving down motorway this morning when loss of power she pulled over and oil and battery light was on. Up to now the recovery said the belt had snapped and knocked water hoses off. Rang garage they confirmed belt had snapped but couldnt tell me anymore until further investigation. Had all belts replaced inc pulleys tensioner oil case housing all from the large one on this site. Hope its not completely screwed any advice from you all would be of help as dont know what to do from here. Thanks steven
If its taken out the hoses are you talking about the aux belt and not the front cam belt as the cam belt would need to smash through the cam belt cover to take the hoses out?.
Flack
18th Aug 2014 2:17 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20837
As above
It is highly unlikely the cam belt would have snapped, burst through the belt cover and taken damaged a water hose.
That would bring the battery light on. Had she carried on down the motorway, it may have started to overheat due to no water pump, which put the car into Limp Mode, and shut the engine down to protect itself
Member Since: 27 Nov 2011
Location: liverpool
Posts: 17
Just checked in at the garage and took some photos what do you think.there chief mechanic wasnt in so could not tell me much until tomorrow.
18th Aug 2014 5:27 pm
Allan_T
Member Since: 10 Sep 2012
Location: Northampton
Posts: 1034
Click image to enlarge
Click image to enlarge
GAP IID Pro Multi Vehicle Defender L316 2007-2015 - Discovery 3 - Discovery 4 - Discovery Sport L550 - Freelander 2 - Range Rover Evoque L538 - Range Rover L322 - Range Rover L405 - Range Rover Sport L320 - Range Rover Sport L494 Electrical Fault Diagnostics
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
ones?
