It triggered 1st from a cold start and is now doing it every time it’s driven
I’ve replaced the brake switch and the battery and followed the wiki instructions for a hard reset but it’s still doing it so was hoping someone could read the fault codes so I’m not chasing every possible cause blindly
14th Apr 2022 7:38 pm
Bicycle repairman
Member Since: 18 Sep 2019
Location: Cumbria
Posts: 158
check the body to chassis connector N/S rear for any broken loose wiresD4 GS let the retro fit begin
Heated steering wheel
Aftermarket TPMS
Double Din head unit satnav and TV
Reverse Camera
Cubby fridge
Door panel upgrade
Mood lighting
Digital Dash personalised
Back lit sun visors
4.5 Facelift front, rear and memory mirrors
Stainless bumper tread plate
6 pot Brembo conversion
HSE heated memory seats
Retro fit auto lights and wipers
LR 663 Defender alloys
275 45 20 GG AT3s
quarter of a D3
14th Apr 2022 8:37 pm
Fat Controller
Member Since: 01 Nov 2021
Location: Crewe
Posts: 8
Will check that tomorrow then…. Apologies for being a bit thick but still learning my way around the discovery. Where exactly is this body to chassis connector?
14th Apr 2022 8:49 pm
Bicycle repairman
Member Since: 18 Sep 2019
Location: Cumbria
Posts: 158
Behind passenger rear wheel you may see just a plug or you may see a bit of plastic shield its roughly on top of chassis rail next to spare wheel give the wires a tug and good visual inspection as the can often be corroded where the wire is connect to the pin hope this helpsD4 GS let the retro fit begin
Heated steering wheel
Aftermarket TPMS
Double Din head unit satnav and TV
Reverse Camera
Cubby fridge
Door panel upgrade
Mood lighting
Digital Dash personalised
Back lit sun visors
4.5 Facelift front, rear and memory mirrors
Stainless bumper tread plate
6 pot Brembo conversion
HSE heated memory seats
Retro fit auto lights and wipers
LR 663 Defender alloys
275 45 20 GG AT3s
quarter of a D3
14th Apr 2022 8:51 pm
Fat Controller
Member Since: 01 Nov 2021
Location: Crewe
Posts: 8
Brilliant, thanks I’ll check this in the morning. If this is the culprit should I do a hard reset again?
14th Apr 2022 9:06 pm
Bicycle repairman
Member Since: 18 Sep 2019
Location: Cumbria
Posts: 158
No you will need to repair the loom first if corroded or brokenD4 GS let the retro fit begin
Heated steering wheel
Aftermarket TPMS
Double Din head unit satnav and TV
Reverse Camera
Cubby fridge
Door panel upgrade
Mood lighting
Digital Dash personalised
Back lit sun visors
4.5 Facelift front, rear and memory mirrors
Stainless bumper tread plate
6 pot Brembo conversion
HSE heated memory seats
Retro fit auto lights and wipers
LR 663 Defender alloys
275 45 20 GG AT3s
quarter of a D3
14th Apr 2022 9:18 pm
Fat Controller
Member Since: 01 Nov 2021
Location: Crewe
Posts: 8
The wiring looks ok. Is it both connectors that should be cleaned?
15th Apr 2022 9:58 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20732
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum