Member Since: 26 Feb 2008
Location: Knysna
Posts: 212
After all said & done.... I sat down with a beer and checked out the installation. Much to my disgust I realized that it would have been a very simple matter to mount the RR without the Thule foot kit system. Very simple to have manufactured the plate & bolt which slides into the roof track and then bolt the Thule bars directly onto that. One can use any amount of spacers if you require the RR to be raised. That would have saved me the R1,600 (GBP 105)
Oh well, maybe this idea can be used by other members. Give me a pm if you need pics or dimensions.Ren Colyn
TDV6 HSE
4th Mar 2008 11:05 am
Rencolyn
Member Since: 26 Feb 2008
Location: Knysna
Posts: 212
Ok, decided to sell the Thule mounting kits (dealer would not refund!) Anyone interested in a good deal? PM or email meRen Colyn
TDV6 HSE
5th Mar 2008 8:01 am
nigelc
Member Since: 16 Apr 2008
Location: leicestershire
Posts: 267
You can fit Thule roof mounted bike carriers on the Land Rover cross bars. I had a complete Thule set up with my previous car including 3 of the basic Thule bike carriers. What you need is a mounting kit for the cycle carrier for attaching to wide bars. Basically it's a bolt with a large square head which replaces the normal things which clamp round the Thule bars. You take the rubber channel filler out and slide the bolt into the open channel in the top of the LR roofbar. Sorry can't remember the part names or numbers but have a look at the Roof Box company website. Ive got 3 relatively heavy bikes and no problems so far. Of course getting your bikes up there is another matter but the cost of a tow bar plus rear rack would have cost more than our bikes. The real problem is the fact that the LR bars only slide into the roof channels at a couple of points so you cant keep the whole lot assembled and drop staroight ontothe roof when you need them.
17th Apr 2008 6:04 pm
nigelc
Member Since: 16 Apr 2008
Location: leicestershire
Posts: 267
OK I've checked - I've got Thule 530 bike carriers and to fit to the LR bars you need the T track aerobar adaptor kit.
17th Apr 2008 6:10 pm
nigelc
Member Since: 16 Apr 2008
Location: leicestershire
Posts: 267
OK I've checked - I've got Thule 530 bike carriers and to fit to the LR bars you need the T track aerobar adaptor kit.
17th Apr 2008 6:34 pm
Rencolyn
Member Since: 26 Feb 2008
Location: Knysna
Posts: 212
Nigel, would you think that the square plate is made from anything other than mild steel? Bearing in mind that the entire fitting albeit bike carrier or roof rack, depends solely on the strength of that plate. If it bends & pops out your load is left on the road behind you!
I have held back on doing it myself for this reason. Need more info first.Ren Colyn
TDV6 HSE
18th Apr 2008 1:34 am
nigelc
Member Since: 16 Apr 2008
Location: leicestershire
Posts: 267
I think its stronger than mild steel - they're quite chunky (and quite expensive!) I had the same concern but no problems. I presume Thule have tested them with far more load than the weight of bike + carrier. Actually I would have more concerns about the thickness of the metal around the channel in the bar
18th Apr 2008 9:14 am
Ajpf5
Member Since: 13 Jul 2013
Location: Manchester
Posts: 84
nigelc wrote:
OK I've checked - I've got Thule 530 bike carriers and to fit to the LR bars you need the T track aerobar adaptor kit.
There are 3 different sizes - please can anyone let me know the measurements, cheers all
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum