AJB2603
Member Since: 23 May 2011
Location: Oxfordshire
Posts: 21
 
|
Ah. That seems to work now. *sheepish look on face*
|
 5th Feb 2012 3:30 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
  
|
Least you know how to get the panel apart now  G4 Gone ...but not forgotten
|
| 5th Feb 2012 3:32 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
Kevin Scott ....please get in touch as this service is for UK ...
i can still help , but there is additional postage for outside the UK G4 Gone ...but not forgotten
|
| 6th Feb 2012 5:22 pm |
|
|
kevin bradley
Member Since: 07 Feb 2012
Location: 's-Hertogenbosch
Posts: 3
|
Hi Wiggsy, yes, I'm in the LowLands, please indicate what the extra will be for the postage to The Netherlands. Can I send it over via PayPal also ? And eventually I will need return address for the old unit...
BTW. I'm looking into a DVB-T receiver with subscription card for the MOST based display (my rig is a 2006 RR Vogue). I've come up with 2 items from Clifford:
http://www.clifford.nl/nl/products-multimedia-tvtuner.html
http://www.clifford.nl/nl/products-multime...rover.html OPV-2LR
- but over here it's going top cost an eye watering euro 1800 + fitting ! Any ideas on that one ? I see more MOST based systems popping up in component shows, but not available in the ICE shops yet 
Cheers,
Kevin.
|
| 7th Feb 2012 3:46 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
i would be looking at a gvif interface for a couple of hundred £ ...then add any DVB-T box you want
http://www.hids4u.co.uk/land-rover-discove...creen.html
pm'd you the postage fee and paypal address G4 Gone ...but not forgotten
|
| 7th Feb 2012 3:54 pm |
|
|
kevin bradley
Member Since: 07 Feb 2012
Location: 's-Hertogenbosch
Posts: 3
|
Hi Wiggsy,
OK great, I'll check it out when I get home and also get the postage organized via PayPal..
Thanks again, esp. for the link to GVIF I didn't know that existed ! 
Kevin.
BTW. 'frickin cold or what 
|
| 7th Feb 2012 4:20 pm |
|
|
kevin bradley
Member Since: 07 Feb 2012
Location: 's-Hertogenbosch
Posts: 3
|
Hi Wiggsy,
yep just checked it out (brrrr !) it's a 500045 (same as in the instruction notes), so I reckon we're good to go !
Have sorted the PayPal for the international postage also...
Looking forward to BlueTooth nirvana
Cheers,
Kevin B.
|
| 7th Feb 2012 8:38 pm |
|
|
anyone4apint
Member Since: 08 Feb 2012
Location: Birmingham
Posts: 1
|
Hi Wiggs,
The guys over at RRSport.co.uk recommended that I talk to you. I have a 2005 Range Rover Sport HSE and it has the built in bluetooth (Nokia connector dock under the center arm rest, call buttons on steering wheel, etc).
Untill recently it was semi-working with an iPhone and Windows Mobile phone over Bluetooth.... by semi working I mean that you had to manually pair every time you got in and the phonebook didnt function.
However, last week the BT simply stopped working. I tried to pair it, and nothing - no BT devicies are visable. Once in a while it does show up as a visable device, I try to pair and it then just hangs at connecting. Its doing this with three different phones so I know its not the phone.
I was wondering if you have any idea what may be causing it and if your refurb service with the updated firmware may fix it? If so, any idea how I get to the module on a 2005 Sport?
Thanks in advance,
Will
Edit: after removing the battery live for a few mins and reconnecting its all ok again. However, I will be in touch soon to buy an upgrade so that it auto pairs.
Last edited by anyone4apint on 10th Feb 2012 7:22 am. Edited 1 time in total
|
| 8th Feb 2012 10:23 pm |
|
|
Johndixon1967
Member Since: 09 Feb 2012
Location: Tunbridge wells
Posts: 3
|
Hi
I have a late 2004 and the pairing code seems to be 0000
Does anyone know how I can get my iPhone to work. I would be prepared to upgrade my module but I don't know if I can
When I look at. Bluetooth on my phone it says par with fords audio
Any help appreciated
Thanks
John
|
| 10th Feb 2012 7:16 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
anyone4apint
I would check you haven't got any water ingress round the Bluetooth module ... Yours is located in tbe boot ... Drivers side .. Behind a small removable panel ( its quite common on tbe FFRR but there's are mounted on the opposite side )
Johndixon1967
Unfortunatly you have the aftermarket kit .. Which is very limited what it can do when working.
You cannot update the software on yours .
Best bet would be pull tbe kit out and fit the factory version .., although I suspect you would need a couple of software updates on the screen and radio due to your car being one of the first G4 Gone ...but not forgotten
Last edited by wiggs on 10th Feb 2012 10:04 am. Edited 1 time in total
|
| 10th Feb 2012 7:32 am |
|
|
Johndixon1967
Member Since: 09 Feb 2012
Location: Tunbridge wells
Posts: 3
|
Ok
Thanks ,that sucks:(
I'll check for water , is the switch over to factory fairly easy?
I'm worried about cost
Cheers
John
|
| 10th Feb 2012 9:55 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
Ignore the water bit ... It's not relevant in your case ( my mistake as I had addressed both issues to you ...)
Being as you already have some bits you can use ... Proberly going to be in the region of £200
I do have an aftermarket Bluetooth module here if you want to try it ... I have no means of testing it ... But it will only take a few mins to swap over G4 Gone ...but not forgotten
|
| 10th Feb 2012 10:06 am |
|
|
Johndixon1967
Member Since: 09 Feb 2012
Location: Tunbridge wells
Posts: 3
|
Thanks
Would love to try module, I noticed you are in Kent
I'm in Tunbridge wells
Please let me know , how we should exchange and costs involved
My email is johndixon1967@gmail.com
Thanks
|
| 10th Feb 2012 3:14 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
im in Manchester
will email you G4 Gone ...but not forgotten
|
| 10th Feb 2012 3:32 pm |
|
|
and.mitch2312
Member Since: 06 Aug 2011
Location: Llantwit Major
Posts: 3
 
|
Hi
I probably should have done a bit of research but haven't.  But hopefully someone can help me I have a Disco HSE 08 plate but I didn't know which size torx (Do they differ depending on year?  ) to get for the bluetooth exchange.
thanks
And.mitch2312
|
| 18th Feb 2012 12:44 pm |
|
|
