Had cause to lift the D3 using my 3 tonne trolley jack, all looking good but whilst working underneath sudden creaks & groan followed by a lurch and D3 is off its jack and all 4 wheels back on the ground !!!. Having just narrowly missed getting my head squashed I look for the jack to discover it embedded upward in to the D3 floorspace . Closer inspection revealed it has punctured the plastic box on the underside n/s just forward of the rear wheel arch and penetrated to a depth of about 5 inches .......eventually managed to lower and retrieve the jack head with accompanying splintering plastic pieces and noise . Inspection of the damage revealed foam rubber and wring behind which thankfully appears undamaged but i am now left with this:
Clearly cannot stay unrepaired as open to water etc......, what wiring does this belong to ?
Anyone had to replace this plastic box before for any reason and whats involved ???
14th Jul 2010 9:06 pm
woody32 Site Sponsor
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
Sorry to hear that,but AXLE STAND comes to mind i bet you use one next time Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
14th Jul 2010 9:13 pm
blue meanie D3 Decade
Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
compressor housing box and mount Si, you need to check it stil works ok and theeeeennn......???
14th Jul 2010 9:15 pm
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
That looks like the compressor housing for the air suspension to me, you'll be lucky if you haven't broken the mountings.
The compressor appears to be still working as the air suspension seems all ok .......yup it is rear passenger side.When checking behind the foam rubber all I could see was wiring and several multi block connectors which did not look damaged so hopefully survived to live another day !
must get those axle stands I have been promising myself !!!!
14th Jul 2010 9:30 pm
woody32 Site Sponsor
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
Could try these for a second hand cover no connection http://www.cws4x4.co.uk/ or if you want a new one i can pick one up from TLO and im coming over to barry next fri evening could meet m4 or you could just use the postman Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
14th Jul 2010 9:45 pm
MartinR
Member Since: 27 Jan 2008
Location: Oxon
Posts: 708
Just to be clear, you did jack it up on this inviting box, rather than on the chassis rail and it then fell off? Jacked the D4 for the first time the other day, and having read all the horror stories on here, was very careful to make sure I used the right points - just want to know if there's something else to have nightmares about!
I sure did not Jack it up on the box , bit more savvy than that .......it was on the jacking point which I have done many times before so to have it roll off was a VERY big surprise !!!!!!!
14th Jul 2010 10:13 pm
DaveVX
Member Since: 15 Oct 2008
Location: Hampshire
Posts: 867
RAC jacked ours up there...horrible noise when it slipped off!
14th Jul 2010 11:46 pm
MartinR
Member Since: 27 Jan 2008
Location: Oxon
Posts: 708
simoniz wrote:
bit more savvy than that
Sorry!
simoniz wrote:
it was on the jacking point which I have done many times before so to have it roll off was a VERY big surprise !!!!!!!
I can imagine! I didn't use the trolley jack in the end because it only has a 'cup' without the locating pin that's on the LR jack - guess it's time to get one of those machined adapters that gives you the pin
15th Jul 2010 10:12 am
2DISCO3ORNOT
Member Since: 27 Apr 2009
Location: at sea
Posts: 1209
Hi Simoniz just so I have this right... you had a trolley jack on the jacking point and it slipped and went through the floor or the jacking point gave way
15th Jul 2010 10:17 am
Kango
Member Since: 16 Jun 2010
Location: Swindon
Posts: 74
I think we need some "Not a Jacking Point" stickers made up that we can slap on all those "soft" bits.
15th Jul 2010 10:30 am
Q86ARR
Member Since: 23 Feb 2010
Location: Jersey
Posts: 378
There is a symbol on the underside of the compressor saying it is not a jacking point.
15th Jul 2010 10:41 am
MartinR
Member Since: 27 Jan 2008
Location: Oxon
Posts: 708
...which has been missed all too many times before, particularly in tyre fitters if I remember the discussions on here!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum