Changed Moneypits engine oil today which is a annual occurrence. She's 57 plate with 142K on the clock & been serviced every year since new. Since the last oil change she has done a grand total of 1750 miles.
I was a little alarmed to see glittery swarf in the pan of the old engine oil. Is this normal? I can't remember seeing it on previous changes, although i'd never really made a point of looking, which i did on this occasion.
What do you guys think? Should I be concerned?
Cheers n Gone Nick MY16 D4 Landmark SDV6 (The Ice Maiden)
Uncle Ray's spare wheel protector
MY08 D3 HSE Stornoway (Miss Moneypit) The money tree withered......
Last edited by Skagg on 13th Jun 2020 10:48 am. Edited 1 time in total
7th Jun 2020 4:02 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Well IMHO
That is trouble!
If it is not rattling, knocking yet, you can be lucky, IF you do not attempt to start it anymore, but tow it if needed moved.
And change your big-end’s and mainbearings before running it again...
If you change your bottom-end bearings, you have a very big chance that You can use it for another 140K
If you attempt to start (and run) it and its start knocking, you need a new crankshaft also...
New bottom end bearings are around 140 quid + work...
“New” or other engine (like a JAG) starts at 1400 quid plus, + materials and then the work....
My advice, do not run it, until you know what te problem is...Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
7th Jun 2020 5:21 pm
Stevepd
Member Since: 06 Mar 2018
Location: Wiltshire
Posts: 392
I’d do one of those sample things and make sure you put the bits in. I’m sure for the sake of a few quid they can tell you what metal it is so you can narrow down the potential failure visiting from www.rrsport.co.uk
7th Jun 2020 5:38 pm
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2462
Use a magnet to see if its steel or bearing material.
I'll dig the filter out the bin and take a look. There isn't currently any other sign of an issue. No unusual knocking etc.
Cheers n Gone NickMY16 D4 Landmark SDV6 (The Ice Maiden)
Uncle Ray's spare wheel protector
MY08 D3 HSE Stornoway (Miss Moneypit) The money tree withered......
7th Jun 2020 8:26 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72931
Hate to say you don’t get a warning when the engine decides to pop it’s proverbial clogs. I’d just come off a roundabout in NW Norway, bounced round a bus and was thinking “she’s driving brilliantly”, then came the flap flap flap noise, luckily got into a decent lay-by. I’m sure the bus was laughing at me as it swept past.
It seems to be all steel. On cutting the oil filter there is only the occasional glint of a glitter sized fleck on both the inside and outside.
Cheers n Gone NickMY16 D4 Landmark SDV6 (The Ice Maiden)
Uncle Ray's spare wheel protector
MY08 D3 HSE Stornoway (Miss Moneypit) The money tree withered......
Last edited by Skagg on 13th Jun 2020 10:49 am. Edited 1 time in total
7th Jun 2020 8:48 pm
waterbuoy
Member Since: 26 Oct 2013
Location: Argyll
Posts: 2885
Sorry but disagree Del - first heard mine going in East Sussex, had it confirmed by LR main dealer, then drove back up to Scotland via Bath before it finally let go at Lockerbie.Currently 2009 Disco 3 SE, 2013 MY D4 HSE and 2016 D4 SE
Previously:
TD5 Defender 110 CSW (230k miles)
300TDi Disco 1 (289k)
4 RR Classics (300-350k each, 2 manual, 2 auto)
110 V8 CSW (220k)
S3 109 hi cap pickup (ex RN)
S2A 88 Safari SW with lpg conversion (bloody lethal)
7th Jun 2020 8:48 pm
DrRobH
Member Since: 10 Oct 2015
Location: Hampshire
Posts: 927
Visitor from fullfatrr.com
RR Vogue SE 2011 4.4 TDV8
1974 Lightweight
7th Jun 2020 8:55 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4907
Skagg wrote:
I'll dig the filter out the bin and take a look. There isn't currently any other sign of an issue. No unusual knocking etc.
Cheers n Gone Nick
I'd be worried for you Skagg if that swarf came out with the oil, but all may not be lost yet. Have you replaced the oil pump? The pump gears are steel! Also, if the original pump is in place the case may have cracked and is about to let go, which would explain the non ferrous content.
If you have changed the oil pump for an original FoMoCo then its likely more serious issues are playing out.
Really hope its not, but wish you well with it.yµ (idµ - eAµ) ψ=mψ
7th Jun 2020 11:44 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
DSL wrote:
Hate to say you don’t get a warning when the engine decides to pop it’s proverbial clogs. thinking “she’s driving brilliantly”, then came the flap flap flap noise
That was it, she was toast.
Had the same experience with a spun bearing.. one second, runs beautifully, slowed down for a corner and one second later ... knock knock knock....
My filter was full of debris although.... maybe something else... either way, look inside before running it again....Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum