Member Since: 01 Oct 2015
Location: Edinburgh
Posts: 919
jamez79 wrote:
Not to hijack the thread or anything, but just for educational purposes...
If the pre-face lift xenons are fitted to a 2012MY, will that give fairy light DRL's and halogen full beam then?
That's what I did and the lights are a HUUGE improvement on the halogens only. Was almost plug and play with only a small change needed to the vehicle's CCF carried out courtesy of my IID tool. I also modded my second hand new lights to have cornering lights but not sure why I bothered.
Sadly, I also like the look of the fairy lights DRLs.D1 300Tdi - gone
D2 Td5 ES (Alive remapped...mmm) - sadly gone
D4 2012 SDV6 XS - Stolen
D4 2014 SDV6 HSE - Shiny
5th Jan 2021 1:18 pm
Miffed_G
Member Since: 30 Nov 2020
Location: Suffolk
Posts: 22
Fairy DRLs no - the led lights on these light clusters are side lights only - if DRL is enabled then it actually will use the Xenons i believe.
5th Jan 2021 1:56 pm
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
Member Since: 01 Oct 2015
Location: Edinburgh
Posts: 919
Miffed_G wrote:
Fairy DRLs no - the led lights on these light clusters are side lights only - if DRL is enabled then it actually will use the Xenons i believe.
on my MY2012. Well I call them DRLs. I've enabled Swedish or Canadian mode or something, and the fairy light LEDs come on with the engine. Def not the Xenons.D1 300Tdi - gone
D2 Td5 ES (Alive remapped...mmm) - sadly gone
D4 2012 SDV6 XS - Stolen
D4 2014 SDV6 HSE - Shiny
5th Jan 2021 11:01 pm
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
but the fairy light LEDs has no power enough.
On my past 2011 D4 with DRL on, at the engine run, the xenon also came on (Swedish settings)Discovery 5 tdv6 HSE Corris Gray Outback Engineering Limited Edition IID Pro MV License
Last edited by dgardel on 6th Jan 2021 10:18 am. Edited 1 time in total
is there a recognised power range for DRLs ? i think they are only regulated regarding whether thay make the indicators less obvious ... so they should dim or extinguish if they are directly adjacent to the indicator.
the fairy lights are spread across the whole light unit so whilst, I believe, bright enough collectively to be DRLs they do not mask the indicator.
6th Jan 2021 10:18 am
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
No mate they use normal LEDs, not power LEDs.
The fairy lights was designed as side lights.Discovery 5 tdv6 HSE Corris Gray Outback Engineering Limited Edition IID Pro MV License
6th Jan 2021 10:20 am
TonyR
Member Since: 02 Sep 2022
Location: Tewkesbury
Posts: 5
Hi guys was there an answer to this as I have the same issue
stutim
Member Since: 18 Jun 2020
Location: tamworth
Posts: 11
United Kingdom 2009 Discovery 3 TDV6 HSE Auto Baltic BlueDiscovery 3
So just a relay is all it takes is it , any picture to show which relay and where it goes , so no wiring needed mate ,I cant see any of your threads explaining , thanks for reply .. Stu
Regards
2nd Sep 2022 9:15 pm
TonyR
Member Since: 02 Sep 2022
Location: Tewkesbury
Posts: 5
Any idea where to find the threads?
Maxxed_Ross wrote:
they do, that's why I did it
You'll need an extra couple of relays if you want the full beam flash to work, but there's a few threads on that
Really need help with this problem guys?
2nd Sep 2022 9:19 pm
TonyR
Member Since: 02 Sep 2022
Location: Tewkesbury
Posts: 5
Re: So does it just need a relay to make my lights flash
stutim wrote:
Maxxed_Ross wrote:
the old units have two light sources, the new units are single source with a flap inside
If you just plug and play the flash and full beam works fine - but only if the main beam is already on. You'll hear the relay trigger the flap and the full beam icon will come on the dash, but nothing will happen up front.
The extra relay is needed to trigger the actual light source
I was caught out by it to, but after someone else pointed it out there are a few threads covering it... including mine I think
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
but the fairy light LEDs has no power enough.
