Hi flack, what are the maplin connections called? Can’t find them. Cheers
18th Feb 2021 8:56 pm
Jong0211
Member Since: 07 Feb 2021
Location: Warwickshire
Posts: 99
All installed although not tested as flat battery 🤦♂️
Question I have is..... can you buy the square 6 pin grey connector for rear camera? Mine has a rca connection
25th Feb 2021 7:13 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
This one?
I Searched for a while.. could not find it So i made one myself..
But if you find it... please give the link here! Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
25th Feb 2021 7:33 pm
Jong0211
Member Since: 07 Feb 2021
Location: Warwickshire
Posts: 99
Elaborate on how you made with what parts?
25th Feb 2021 8:43 pm
KulikovPN
Member Since: 30 Jul 2019
Location: Moscow
Posts: 20
Suitable connector from the ignition switch of Freelander or Volvo.
26th Apr 2021 6:52 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Jong0211 wrote:
Elaborate on how you made with what parts?
Inside old computers are a lot of connectors (female) who will fit...
Nota a 10 pin (or more) can be cut easy in to one with 2 contacts (all you need)Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
26th Apr 2021 8:49 pm
atlecm
Member Since: 08 Feb 2009
Location: Kristiansand
Posts: 6
Hi. Bought a 2006 D3 HSE a couple of months ago, and has since then spent (much) more time doing mods than driving it...
I bought a display from a 2011 RRS marked BH22... When fitted, it was stuck to the phone-screen, not responding to touch. Only thing happening was when shifting to reverse, the image from the camera would show up. Then back to phone.
I noticed a small scratch on the screen, so thought touch was broken. Bought a new D4 unit, this time from a 2009 D4. Worked well! Since the other unit was from 2011, I hoped the maps would be newer in this unit. So swapped the hdd's. No luck. No maps found...
So then I swapped the screens...2009 screen on 2011 satnav. No change! Still stuck in phone mode
Soooo ended up moving the modified metal frame-bits to the 2009-model. Approximately 649 screws that is...
Now everything works well (Used the original D3 frame). Except the things already mentioned in this tread.
One question remains, this one asked some years ago in this tread, does anyone know?
jonnybgud wrote:
One thing I don't seem to have showing on the screen is the terrain response, hill decent hi/low range & suspension height show but terrain response is greyed out... Anyone else had this or is it showing in yours??
Atle Coward Markussen
My cars: 06 D3 TDV6 HSE PP, 75 109' 2,25 ex-mil, 70 88' S2a 2,25 and 69 FC 2b 2,25
Before: 88 RR 3,5 V8 EFI
13th May 2021 9:15 am
KulikovPN
Member Since: 30 Jul 2019
Location: Moscow
Posts: 20
How do I activate the camera in the display?
The camera is registered in the car.
13th May 2021 7:33 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10673
Can only be done with gap iid
13th May 2021 8:01 pm
KulikovPN
Member Since: 30 Jul 2019
Location: Moscow
Posts: 20
In CCF rear cam is activated. In Disco 3 display cam is worked, but in Disco 4 display not worked.
13th May 2021 8:12 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10673
Yes. That is normal.
The gap iid has to do something special.
If you look in the rear cam options with IID there should be 3 options.
Not fitted
Fitted
MY10 cam
You need the last one for it to be enabled
13th May 2021 9:14 pm
KulikovPN
Member Since: 30 Jul 2019
Location: Moscow
Posts: 20
I haven’t gap iid(((
13th May 2021 9:38 pm
KulikovPN
Member Since: 30 Jul 2019
Location: Moscow
Posts: 20
is it possible to activate with sdd?
14th May 2021 4:16 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10673
I don’t think so. At least I don’t know anyone who has done it.
It’s a non standard config, as it’s a D4 screen in D3
14th May 2021 5:42 pm
atlecm
Member Since: 08 Feb 2009
Location: Kristiansand
Posts: 6
GBRover wrote:
Backlight update, again.
EDIT #3
Final update on my Arduino module! It works really well! I put the photocell under a small Fresnel lens I sourced and mounted it to the center speaker. Gives it a nice finished look. The Arduino module itself sits to the right of the display and down in an opening in the dash frame.
One thing I noticed, and maybe its just me, but during daylight the screen seems much brighter. I noticed before this project that in bright situations the backlight never seemed vivid/bright enough. I assumed it was at full brightness but now I think maybe it defaults to about 80% duty cycle. And I will note that I did not even push it to full brightness in my code with max being 96% duty cycle to keep the LEDs from overheating.
The only thing I need to do yet is polish the code a little.
How is this project going? Is it possible to get some more details? Code and parts?
What did you do with power to the arduino? Doesn't it run on USB? You could just put a 12V to USB - thingy (sorry, I'm Norwegian, I don't know what it is called) inside the dash somewhere?Atle Coward Markussen
My cars: 06 D3 TDV6 HSE PP, 75 109' 2,25 ex-mil, 70 88' S2a 2,25 and 69 FC 2b 2,25
Before: 88 RR 3,5 V8 EFI
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
