| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
NoDo$h
Member Since: 02 May 2006
Location: Finding new and exciting ways to milk badgers.
Posts: 19689
|
What's wrong with mud coloured alloys? I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
|
 18th Apr 2007 11:59 am |
|
|
Ken
Member Since: 20 Feb 2006
Location: Here
Posts: 10865
|
The Wheels in the Photos are powder-coated not painted
They have been dipped n stripped, repaired on a lathe if required then powder coated
The powder-coat is more resilient than paint but like all top layers it can be damaged, Grey has a white base coat so this colour is prone to showing marks, Black on the other hand has a black base coat so you have to go down to the base alloy to show marks.
I really don’t mind a few marks it’s a fact of life so I don’t worry or whinge however if you are worried then silver is the best option as the base coat is silver so marks arnt quite as obvious
Oh the grey ones are a one off for Slimer
|
| 18th Apr 2007 12:30 pm |
|
|
Slimer
Site Moderator
Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295
|
Ken wrote:Oh the grey ones are a one off for Slimer
  The End
|
| 18th Apr 2007 12:35 pm |
|
|
DG
Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50979
|
Ken wrote:.... name your colour and for a fee they could appear
I'll have grey like Slimers   21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
|
| 18th Apr 2007 12:47 pm |
|
|
Slimer
Site Moderator
Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295
|
No chance!  The End
|
| 18th Apr 2007 6:25 pm |
|
|
DaveT
Member Since: 01 Aug 2005
Location: Cornwall
Posts: 2578
 
|
I want grey and I want it now and I'll scream and scream and scream until I get some.
Can I have some in a slightly different grey  (Stornoway!!)
& how come the aussies get 17" MT/R's ???
Lifes not fair.
Winge
Whine
Sulk
Sulk Long succession of Disco's since 2001...
SIII Lightweight - neglected & rusting. Bulkhead, A panels, vent panel & outriggers now disintegrated - Next years project!
|
| 18th Apr 2007 7:31 pm |
|
|
Slimer
Site Moderator
Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295
|
AFAIK you can get 17" MTR's here, as long as you don't drive too fast The End
|
| 18th Apr 2007 7:33 pm |
|
|
LeighW
D3 Decade
Member Since: 31 Jan 2006
Location: Brisbane, AUS
Posts: 920
  
|
DaveT and Slimer, the MT/R 17" available in Oz is probably the same as yours, albeit oversized and under (speed) rated for the D3. - 265/70R17 112P
But the Oz market could change as more requests for 18s and 19s are lodged with the supplier/manufacturers. LeighW
The old girl is on her third engine...
* first ran a bearing (design failure in original engine)
* second had a failure of the water outlet on top of the engine (pls check yours)
|
| 18th Apr 2007 11:21 pm |
|
|
mobyone
Member Since: 23 Dec 2005
Location: Melbourne
Posts: 394
|
I realise this is off the topic  but if Goodyear make these tyres in 19" in the UK, then what's stopping them from bringing a few set's over ere?
Cheers What's the point.... it all comes out in the wash anyway!
85 Range Rover
01 Disco Series II
05 D3 V6SE, Bonatti Grey, 19"alloys
|
| 19th Apr 2007 10:34 am |
|
|
DaveT
Member Since: 01 Aug 2005
Location: Cornwall
Posts: 2578
|
GY UK website doesn't list 17" MT/R's
Can you point me in the right direction Slimer?
Now 18's would be even better! (since I posess 2 sets of 18's but no 17's) Long succession of Disco's since 2001...
SIII Lightweight - neglected & rusting. Bulkhead, A panels, vent panel & outriggers now disintegrated - Next years project!
|
| 19th Apr 2007 7:50 pm |
|
|
Slimer
Site Moderator
Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295
|
Probably on the Global/US site then Dave, personally with the P speed rating I don't think they're worth considering unless you're sure you'll never exceed 93mph The End
|
| 19th Apr 2007 7:54 pm |
|
|
Sniegy
Member Since: 01 May 2006
Location: Melbourne
Posts: 72
|
mobyone wrote:I realise this is off the topic but if Goodyear make these tyres in 19" in the UK, then what's stopping them from bringing a few set's over ere?
Cheers
19" MTR's are now available in AUS. They are the standard size tyre & the same used in the G4 challenge.
18" MTR's will be available around June standard size as well.. D4 Alaska/Almond 2.7 TDV6 with E-diff & extra's.. 
Keep smilin' Pete.
|
| 5th May 2007 12:10 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
