d.lundigan
Member Since: 15 Sep 2013
Location: Chelmsford Essex
Posts: 396
![](templates/vbnew/images/spacer.gif)
![2009 Discovery 4 3.0 TDV6 HSE Auto Stornoway Grey 2009 Discovery 4 3.0 TDV6 HSE Auto Stornoway Grey](../images/veh/stornoway_grey.gif)
|
Mmmmmm I had judders but dr tranny stopped that. As for your noise is it gear related I.e does it change pitch with revs as my drone/grone was at around 2/2.5 revs and came as torque got stronger.
|
14th Feb 2014 8:59 pm |
|
|
disco3dave
Member Since: 26 Jun 2012
Location: Banbury, Oxfordshire
Posts: 190
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 SE Auto Tonga Green 2005 Discovery 3 TDV6 SE Auto Tonga Green](../images/veh/tonga_green.gif)
|
I have used dr tranny and it did work for a while, but now it has come back with vengeance. I have also had the gearbox flushed but as again seem to make it worse, noise and judder happen around 1600 Rpms and also just before up shifts.
|
14th Feb 2014 9:04 pm |
|
|
d.lundigan
Member Since: 15 Sep 2013
Location: Chelmsford Essex
Posts: 396
![](templates/vbnew/images/spacer.gif)
![2009 Discovery 4 3.0 TDV6 HSE Auto Stornoway Grey 2009 Discovery 4 3.0 TDV6 HSE Auto Stornoway Grey](../images/veh/stornoway_grey.gif)
|
Could be your propshaft centre bearing. The rubber is forcing mine to one side causing it to bend as such under load but I have court mine early. If that's your problem then a bent propshaft I.e centre bearing would make it judder as its trying to spin a bent bar of metal. Do you get a drone/vibration through the pedals and I also felt like a scratching grinding though pedals also. My machanic diagnosed it by putting it in reverse and driving backwards in a straight line under load with windows open and I could hear like a ticking / clacking noise from under the car. Apparently that's the shaft hitting the underbody.
|
14th Feb 2014 9:18 pm |
|
|